Abstract:The existence of an air layer reduces friction drag on superhydrophobic surfaces. Therefore, improving the air layer stability of superhydrophobic surfaces holds immense significance in reducing both energy consumption and environmental pollution caused by friction drag. Based on the properties of mathematical discretization and the contact angle hysteresis generated by the wettability difference, a surface coupled with a wettability difference treatment and a convex-stripe array is developed by laser engraving and fluorine modification, and its performance in improving the air layer stability is experimentally studied in a von Kármán swirling flow field. The results show that the destabilization of the air layer is mainly caused by the Kelvin-Helmholtz instability, which is triggered by the density difference between gas and liquid, as well as the tangential velocity difference between gas and liquid. When the air layer is relatively thin, tangential wave destabilization occurs, whereas for larger thicknesses, the destabilization mode is coupled wave destabilization. The maximum Reynolds number that keeps the air layer fully covering the surface of the rotating disk (with drag reduction performance) during the disk rotation process is defined as the critical Reynolds number (Rec), which is 1.62 × 105 for the uniform superhydrophobic surface and 3.24 × 105 for the superhydrophobic surface with a convex stripe on the outermost ring (SCSSP). Individual treatments of wettability difference and a convex-stripe array on the SCSSP further improve the air layer stability, but Rec remains at 3.24 × 105. Finally, the coupling of the wettability difference treatment with a convex-stripe array significantly improves the air layer stability, resulting in an increase of Rec to 4.05 × 105, and the drag reduction rate stably maintained around 30%.

Evolutions of Hairpin Vortexes over a Superhydrophobic Surface in Turbulent Boundary Layer Flow

Mechanisms of Drag Reduction of Superhydrophobic Surfaces in a Turbulent Boundary Layer Flow

Experimental Investigation of the Microscale Rotor–stator Cavity Flow with Rotating Superhydrophobic Surface

Vortex Distributions and Densities on Turbulent Drag Reduction of Microstructure Surfaces

Turbulent flow over wetted and non-wetted superhydrophobic counterparts with random structure

Influence of fluid flow on the stability and wetting transition of submerged superhydrophobic surfaces.

Wall-bounded flow over a realistically rough superhydrophobic surface

Supercooled Water Droplet Impact on Superhydrophobic Surfaces with Various Roughness and Temperature

On Interfacial Deformation and Resistance Characteristics over Superhydrophobic Surfaces: A Numerical Study

A numerical study on the natural transition locations in the flat-plate boundary layers on superhydrophobic surfaces

Study on the shear stress and interfacial friction of droplets moving on a superhydrophobic surface

Slip theory-based numerical investigation of the fluid transport behavior on a surface with a biomimetic microstructure

Drag Reduction Technology of Water Flow on Microstructured Surfaces: A Novel Perspective from Vortex Distributions and Densities

Uniform momentum zones on the smooth and superhydrophobic surfaces in a turbulent boundary layer

Droplet Detachment by Air Flow for Microstructured Superhydrophobic Surfaces

Comparison between super-hydrophobic, liquid infused and rough surfaces: a DNS study

Transient velocity profiles and drag reduction due to air-filled superhydrophobic grooves

Study on the Performance of a Surface with Coupled Wettability Difference and Convex-Stripe Array for Improved Air Layer Stability

Drag Reductions and the Air-Water Interface Stability of Superhydrophobic Surfaces in Rectangular Channel Flow

DRAG REDUCTION IN TURBULENT FLOWS OVER SUPERHYDROPHOBIC SURFACES WITH MICRO-NANO TEXTURES

Experimental Study of A Supersonic Turbulent Boundary Layer Using Piv