Abstract:With the increasing development of intelligent robots and wearable electronics, the demand for high-performance flexible energy storage devices is drastically increasing. In this study, flexible symmetric microsupercapacitors (MSCs) that could operate in a wide working voltage window were developed by combining laser-direct-writing graphene (LG) electrodes with a phosphoric acid-nonionic surfactant liquid crystal (PA-NI LC) gel electrolyte. To increase the flexibility and enhance the conformal ability of the MSC devices to anisotropic surfaces, after the interdigitated LG formed on the polyimide (PI) film surface, the devices were further transferred onto a flexible, stretchable and transparent polydimethylsiloxane (PDMS) substrate; this substrate displayed favorable flexibility and mechanical characteristics in the bending test. Furthermore, the electrochemical performances of the symmetric MSCs with various electrode widths (300, 400, 500 and 600 μm) were evaluated. The findings revealed that symmetric MSC devices could operate in a large voltage range (0-1.5 V); additionally, the device with a 300 μm electrode width (MSC-300) exhibited the largest areal capacitance of 2.3 mF cm-2 at 0.07 mA cm-2 and an areal (volumetric) energy density of 0.72 μWh cm- 2 (0.36 mWh cm- 3) at 55.07 μW cm-2 (27.54 mW cm-3), along with favorable mechanical and cycling stability. After charging for ~20 s, two MSC-300 devices connected in series could supply energy to a calculator to operate for ~130 s, showing its practical application potential as an energy storage device. Moreover, the device displayed favorable reversibility, stability and durability. After 12 months of aging in air at room temperature, its electrochemical performance was not altered, and after charging-discharging measurements for 5000 cycles at 0.07 mA cm-2, ~93.6% of the areal capacitance was still retained; these results demonstrated its practical long-term application potential as an energy storage device.

Carbon-based flexible micro-supercapacitor fabrication via mask-free ambient micro-plasma-jet etching

All-solid-state flexible micro-supercapacitor arrays with patterned graphene/MWNT electrodes

Freestanding Solid-State Micro-Supercapacitor Based on Laser-Patterned Nanofibers

Simplified Fabrication of High Areal Capacitance All-Solid-state Micro-Supercapacitors Based on Graphene and MnO2 Nanosheets

Floating Catalyst Chemical Vapor Deposition Patterning Nitrogen‐Doped Single‐Walled Carbon Nanotubes for Shape Tailorable and Flexible Micro‐Supercapacitors

Flexible, Planar Integratable and All-Solid-state Micro-Supercapacitors Based on Nanoporous Gold/ Manganese Oxide Hybrid Electrodes Via Template Plasma Etching Method

Laser engraving and punching of graphene films as flexible all-solid-state planar micro-supercapacitor electrodes

Freestanding Micro-Supercapacitor with Interdigital Electrodes for Low-Power Electronic Systems

Large‐Scale Fabrication of Flexible On‐Chip Micro‐Supercapacitors by a Mechanical Scribing Process

Scalable fabrication of MXene-based flexible micro-supercapacitor with outstanding volumetric capacitance

Highly Flexible, Foldable, and Rollable Microsupercapacitors on an Ultrathin Polyimide Substrate with High Power Density

Facile Assembly of Flexible Symmetric Micro-Supercapacitors with Wide Working Voltage Window

Flexible Micro-Supercapacitor Based on In-Situ Assembled Graphene on Metal Template at Room Temperature

Controllable layer-by-layer assembly of metal-organic frameworks/polyaniline membranes for flexible solid-state microsupercapacitors

Stamping Fabrication of Flexible Planar Micro‐Supercapacitors Using Porous Graphene Inks

Self-assembly of graphene-based planar micro-supercapacitor with selective laser etching-induced superhydrophobic/superhydrophilic pattern

Facile Fabrication of 2D Porous Carbon Nano-Flake Electrodes for High-Performance Flexible On-Chip Micro-Supercapacitors

Scalable Fabrication of High-Performance Micro-Supercapacitors by Embedding Thick Interdigital Microelectrodes into Microcavities

A high performance and flexible in-plane asymmetric micro-supercapacitor (MSC) fabricated with functional electrochemical-exfoliated graphene

Paper-based All-Solid-state Flexible Asymmetric Micro-Supercapacitors Fabricated by a Simple Pencil Drawing Methodology

Facile assembly of flexible, stretchable and attachable symmetric microsupercapacitors with wide working voltage windows and favorable durability