Abstract:Amorphous and nanocrystalline soft magnetic materials have attracted much attention in the area of sensor applications. In this work, the magnetoimpedance (MI) effect of patterned soft ferromagnetic meander-shaped sensor elements has been investigated. They were fabricated starting from the cobalt-based amorphous ribbon using the lithography technique and chemical etching. Three-turn (S1: spacing s = 50 μm, width w = 300 μm, length l = 5 mm; S2: spacing s = 50 μm, width w = 400 μm, length l = 5 mm) and six-turn (S3: s = 40 μm, w = 250 μm, length l = 5 mm; S4: s = 40 μm, w = 250 μm and l = 8 mm) meanders were designed. The 'n' shaped meander part was denominated as "one turn". The S4 meander possesses a maximum MI ratio calculated for the total impedance ΔZ/Z ≈ 250% with a sensitivity of about 36%/Oe (for the frequency of about 45 MHz), and an MI ratio calculated for the real part of the total impedance ΔR/R ≈ 250% with the sensitivity of about 32%/Oe (for the frequency of 50 MHz). Chemical etching and the length of the samples had a strong impact on the surface magnetic properties and the magnetoimpedance. A comparative analysis of the surface magnetic properties obtained by the magneto-optical Kerr technique and MI data shows that the designed ferromagnetic meander-shaped sensor elements can be recommended for high frequency sensor applications focused on the large drop analysis. Here we understand a single large drop as the water-based sample to analyze, placed onto the surface of the MI sensor element either by microsyringe (volue range 0.5-500 μL) or automatic dispenser (volume range 0.1-50 mL).

Giant magnetoimpedance effects applications and materials science in patterned Co-based ribbons with a meander structure

Optimized Giant Magnetoimpedance Effect In Amorphous And Nanocrystalline Materials

Valve Behavior Of Giant Magnetoimpedance In Field-Annealed Co70fe5si15nb2.2cu0.8b7 Amorphous Ribbon

Enhanced Gmi Effect in A Co70fe5si15b10 Ribbon Due to Cu and Nb Substitution for B

Ultra-large Giant Magnetoimpedance Effect by a 2D Square Spiral Amorphous Microwire

Large Enhancement of Gmi Effect in Polymer Composites Containing Co-Based Ferromagnetic Microwires

NUMERICAL STUDY ON GIANT MAGNETO IMPEDANCE EFFECTS IN SOFT MAGNETIC RIBBONS

Giant Magnetoimpedance Effect in a Co-Based Microwire for Quick-Response Magnetic Sensor Applications

Magneto-Impedance In Fe73.5cu1mo3si13.5b9 Alloy Ribbons

Line spacing effect on the giant magnetoimpedance behavior on microribbon with meander type: a comparison of theory and experiment

Design and characteristic analysis of giant magnetoimpedance sensor in Fe-based nanocrystalline ribbons

Length Effect on Giant Magneto-Impedance in Glass-Covered Co-rich Amorphous Wire

Magnetic interactions and magnetoimpedance effect in FINEMET/SiO2/FePt composite ribbons

Giant magnetoimpedance materials: Fundamentals and applications

Giant Magnetoimpedance of Glass-Covered Amorphous Microwires of Co-Mn-Si-B and Co-Si-B

Sensing mechanism modeling of off-diagonal asymmetric giant magnetoimpedance effect in ribbons

Wire-Length Effect on Gmi in Co70.3fe3.7b10si13cr3 Amorphous Glass-Coated Microwires

Comparison of magnetoimpedance behaviors in meander CoFeNiSiB amorphous ribbon for deformation sensing applications

Hysteretic giant magnetoimpedance effect analyzed by first-order reversal curves

Magnetoimpedance Effect in the Ribbon-Based Patterned Soft Ferromagnetic Meander-Shaped Elements for Sensor Application

Large GMI effect in Co-rich amorphous wire by tensile stress