Abstract:Abstract Accelerated carbonation of ultramafic mine tailings has the potential to offset CO2 emissions produced by mining ores from Cu-Ni-platinum group element, podiform chromite, diamondiferous kimberlite, and historical chrysotile deposits. Treatments such as acid leaching, reaction of tailings with elevated concentrations of gaseous CO2, and optimization of tailings pore water saturation have been shown to enhance CO2 sequestration rates in laboratory settings. The next challenge is to deploy treatment technologies on the pilot and field scale while minimizing cost, energy input, and adverse environmental impacts. Implementation of accelerated tailings carbonation at field scale will ideally make use of in situ treatments or modified ore-processing routes that employ conventional technology and expertise and operate at close to ambient temperatures and pressures. Here, we describe column experiments designed to trial two geochemical treatments that address these criteria: (1) direct reaction of partially saturated ultramafic tailings with synthetic flue gas from power generation (10% CO2 in N2) and (2) repeated heap leaching of ultramafic tailings with dilute sulfuric acid. In the first experiment, we report rapid carbonation of brucite [Mg(OH)2] in the presence of 10% CO2 gas within tailings sampled from the Woodsreef chrysotile mine, New South Wales, Australia. Within four weeks, we observe a doubling of the amount of CO2 stored within minerals relative to what is achieved after three decades of passive mineral carbonation via air capture in the field. Our simulated heap leaching experiments, treated daily with 0.08 M H2SO4, produce high-Mg leachates that have the potential to sequester 21.2 kg CO2 m–2 y–1, which is approximately one to two orders of magnitude higher than the rate of passive carbonation of the Woodsreef mine tailings. Although some nesquehonite (MgCO3 · 3H2O) forms from these leachates, most of the Mg is precipitated as Mg sulfate minerals instead. Therefore, an acid other than H2SO4 could be used; otherwise, sulfate removal would be required to maximize CO2 sequestration potential from acid heap leaching treatments. Reactive transport modeling (MIN3P) is employed to simulate acid leaching experiments and predict the effects of heap leaching for up to five years. Finally, our synchrotron X-ray fluorescence microscopy results for leached tailings material reveal that valuable trace metals (Fe, Ni, Mn, Co, Cr) become highly concentrated within secondary Fe (hydr)oxide minerals at the pH neutralization horizon within our column experiments. This discrete horizon migrates downward, and our reactive transport models indicate it will become increasingly enriched in first-row transition metals in response to continued acid leaching. Acid-leaching treatments for accelerated mineral carbonation could therefore be useful for ore processing and recovery of base metals from tailings, waste rock, or low-grade ores.

Economic Analysis on the Application of Mechanical Activation in an Integrated Mineral Carbonation Process

Particle Carbonation Kinetics Models and Activation Methods under Mild Environment: the Case of Calcium Silicate

Potential of Mechanochemically Activated Sulfidic Mining Waste Rock for Alkali Activation

Accelerating Mineral Carbonation in Ultramafic Mine Tailings via Direct CO2 Reaction and Heap Leaching with Potential for Base Metal Enrichment and Recovery

Mineralogical and chemical characterization of mining waste and utilization for carbon sequestration through mineral carbonation

Enhanced CO 2 mineralization and selective critical metal extraction from olivine and laterites

CO2 Sequestration through Mineral Carbonation: Effect of Different Parameters on Carbonation of Fe-Rich Mine Waste Materials

Accelerated Carbonation of High-Calcite Wollastonite Tailings

Carbon mineralization with concurrent critical metal recovery from olivine

Accelerated Weathering and Carbonation (Mild to Intensified) of Natural Canadian Silicates (Kimberlite and Wollastonite) for CO2 Sequestration

Control of Carbon Dioxide Sequestration by Mechanical Activation of Red Mud

Enhanced Recovery of Zn from Carbonate-Type Mixed Oxidized Ore (CMO) by Combining Organic Acid Leaching with Mechanical Activation

Activation flotation of lime-depressed pyrite with carbon dioxide: Performances, mechanism and pilot-scale application

Role of Mg Gangue Minerals in Natural Analogue CO2 Sequestration

Application and optimization of a quantified kinetic formula to mineral carbonation of natural silicate samples

Elution of Divalent Cations from Iron Ore Mining Waste in an Indirect Aqueous Mineral Carbonation for Carbon Capture and Storage

Enhanced mineral carbonation on surface functionalized MgO derived from mine tailings

Performance and Mechanisms of Alkaline Solid Waste in CO2 Mineralization and Utilization

Effect of mechanical activation on alumina extraction from coal fly ash

Advanced Mineral Carbonation: An Approach to Accelerate CO2 Sequestration Using Steel Production Wastes and Integrated Fluidized Bed Reactor