Abstract:Due to the complex multiscale interaction between intense turbulence and relatively weak flames, turbulent premixed flames in the thin and broken reaction zones regimes exhibit strong finite-rate chemistry and strain effects and are hence challenging to model. In this work, a laboratory premixed jet flame in the broken reaction zone, which has recently been studied using direct numerical simulation (DNS), is modeled using a large eddy simulation (LES)/dynamic thickened flame (DTF) approach with detailed chemistry. The presence of substantial flame thickening due to strong turbulence-chemistry interactions, which can be characterized by a high Karlovitz number (Ka), requires the DTF model to thicken the flame in an adaptive way based on the local resolution of flame scales. Here, an appropriate flame sensor and strain-sensitive flame thickness are used to automatically determine the thickening location and thickening factor, respectively. To account for finite-rate chemistry and strain effects, the chemistry is described in two different ways: (1) detailed chemistry denoted as full transport and chemistry (FTC), and (2) tabulated chemistry based on a strained premixed flamelet (SPF) model. The performance of the augmented LES/DTF approach for modeling the high Ka premixed flame is assessed through detailed a posteriori comparisons with DNS of the same flame. It is found that the LES/DTF/FTC model is capable of reproducing most features of the high Ka turbulent premixed flame including accurate CO and NO prediction. The LES/DTF/SPF model has the potential to capture the impact of strong turbulence on the flame structure and provides reasonable prediction of pollutant emissions at a reasonable computational cost. In order to identify the impact of aerodynamic strain, the turbulent flame structure is analyzed and compared with unstrained and strained premixed flamelet solutions. The results indicate that detailed strain effects should be considered when using tabulated methods to model high Ka premixed flames.

A Les-Lem Study of Preferential Diffusion Processes in A Partially Premixed Swirling Combustor with Synthesis Gases

Large-Eddy Simulation of Premixed Methane/Air Jet Flames

Large-eddy Simulation of Flow and Combustion Dynamics in a Lean Partially-premixed Swirling Combustor

Large Eddy Simulation/dynamic Thickened Flame Modeling of a High Karlovitz Number Turbulent Premixed Jet Flame

Studies on a Swirling Heptane Spray Flame by Large-Eddy Simulation

Large-eddy Simulation of Mixing and Combustion in a Premixed Swirling Combustor with Synthesis Gases

Direct Numerical Simulations and Analysis of Three-Dimensional N-Heptane Spray Flames in a Model Swirl Combustor

Investigation of Dilution Effects on Partially Premixed Swirling Syngas Flames Using a LES-LEM Approach

Large-Eddy Simulation of a Swirling Diffusion Flame Using a SOM SGS Combustion Model

Large-eddy Structures of Turbulent Swirling Flows and Methane-Air Swirling Diffusion Combustion

Large Eddy Simulation of Turbulent Premixed Swirling Flames Using Dynamic Thickened Flame with Tabulated Detailed Chemistry

Numerical Investigation of Swirl-Stabilized Pulverized Coal Flames in Air and Oxy-Fuel Atmospheres by Means of Large Eddy Simulation Coupled with Tabulated Chemistry

Large-eddy Simulation of Turbulent Combustion Based on Steady Flamelet/progress Variable Approach

Experimental Validation Of Large-Eddy Simulation For Swirling Methane-Air Non-Premixed Combustion

Large-eddy simulation of Cambridge-Sandia stratified flames under high swirl

Large Eddy Simulations of Turbulent Combustion of Kerosene-Air in a Dual Swirl Gas Turbine Model Combustor at High Pressures

Spray flames in an air-heptane swirling combustor

Flow and Air-Fuel Mixing Processes in a Premixed Swirl Combustor with LES

Study on combustion characteristics of swirl premixed combustor

Filtered Density Function Simulations of a Near-Limit Turbulent Lean Premixed Flame

Assessment of the Partially Stirred Reactor Model for LES in a Swirl-Stabilized Turbulent Premixed Flame