Abstract:Physically Unclonable Functions (PUFs) have proved to be an effective and low-cost measure against counterfeiting by providing device authentication and secure key storage services. Memory-based PUF implementations are an attractive option due to the ubiquitous nature of memory in electronic devices and the requirement of minimal (or no) additional circuitry. Dynamic Random Access Memory-- (DRAM) based PUFs are particularly advantageous due to their large address space and multiple controllable parameters during response generation. However, prior works on DRAM PUFs use a static response-generation mechanism making them vulnerable to security attacks. Further, they result in slow device authentication, are not applicable to commercial off-the-shelf devices, or require DRAM power cycling prior to authentication. In this article, we propose D-PUF, an intrinsically reconfigurable DRAM PUF based on the idea of DRAM refresh pausing. A key feature of the proposed DRAM PUF is reconfigurability, that is, by varying the DRAM refresh-pause interval, the challenge-response behavior of the PUF can be altered, making it robust to various attacks. The article is broadly divided into two parts. In the first part, we demonstrate the use of D-PUF in performing device authentication through a secure, low-overhead methodology. In the second part, we show the generation of true random numbers using D-PUF. The design is implemented and validated using an Altera Stratix IV GX FPGA-based Terasic TR4-230 development board and several off-the-shelf 1GB DDR3 DRAM modules. Our experimental results demonstrate a 4.3×-6.4× reduction in authentication time compared to prior work. Using controlled temperature and accelerated aging tests, we also demonstrate the robustness of our authentication mechanism to temperature variations and aging effects. Finally, the ability of the design to generate random numbers is verified using the NIST Statistical Test Suite.

Puf-Based Encryption Method for Ic Cards On-Chip Memories

An Improved Cross-Coupled NAND Gates PUF for Bank IC Card.

Locking Secret Data in the Vault Leveraging Fuzzy PUFs

25.2 A Reconfigurable RRAM Physically Unclonable Function Utilizing Post-Process Randomness Source with <6×10−6 Native Bit Error Rate

Concealable Physically Unclonable Function Chip with a Memristor Array

Concealable Physical Unclonable Function Generation and In-Memory Encryption Machine using Vertical Self-Rectifying Memristors

A novel PUF against machine learning attack: Implementation on a 16 Mb RRAM chip

A Novel PUF Using Stochastic Short-Term Memory Time of Oxide-Based RRAM for Embedded Applications

A 0.09-Pj/bit Logic-Compatible Multiple-Time Programmable (MTP) Memory-Based PUF Design for IoT Applications

A Strong Physical Unclonable Function With Virgin State Embedded Phase Change Memory

Secure ECDSA SRAM-PUF Based on Universal Single/Double Scalar Multiplication Architecture

A Novel PUF Based on Cell Error Rate Distribution of STT-RAM

D-PUF: An Intrinsically Reconfigurable DRAM PUF for Device Authentication and Random Number Generation.

A High Area-Efficiency RRAM-Based Strong PUF with Multi-Entropy Source and Configurable Double-Read Process

A 28 nm 512 Kb adjacent 2T2R RRAM PUF with interleaved cell mirroring and self-adaptive splitting for high density and low BER cryptographic key in IoT devices

A Proof of Concept SRAM-based Physically Unclonable Function (PUF) Key Generation Mechanism for IoT Devices

A 28nm 512kb Adjacent 2T2R RRAM PUF with Interleaved Cell Mirroring and Self-Adaptive Splitting for Extremely Low Bit Error Rate of Cryptographic Key.

Building Secure SRAM PUF Key Generators on Resource Constrained Devices

A Physically Unclonable Function with BER < 0.35% for Secure Chip Authentication Using Write Speed Variation of RRAM.

A Highly Reliable RRAM Physically Unclonable Function Utilizing Post-Process Randomness Source

Design and optimization of strong Physical Unclonable Function (PUF) based on RRAM array