Influence of Warm Vertical Compaction Technique on Physical Properties of Root Canal Sealers.
Wei Qu,Wei Bai,Yu-Hong Liang,Xue-Jun Gao
DOI: https://doi.org/10.1016/j.joen.2016.08.014
IF: 4.422
2016-01-01
Journal of Endodontics
Abstract:Introduction: The aim of this study was to evaluate the influence of warm vertical compaction on the physical properties of root canal sealers. Methods: The physical properties of 4 sealers (zinc oxide -eugenol [ZOE], AH Plus [Dentsply International, York, PA], RoekoSeal [Roeko/Coltene/Whaledent, Langenau, Germany], and iRoot SP [Innovative Bioceramix, Vancouver, Canada]) were tested. The setting time and flow of these sealers were measured at standard and high temperatures using ISO 6876 (2012) specifications. The percentage of voids in each sealer after complete setting at 37 degrees C and 140 degrees C was analyzed under a stereoscopic microscope. Results: The setting time of ZOE sealer increased significantly from 144.0 +/- 4.1 minutes to 274.2 +/- 7.4 minutes when the temperature increased from 37 degrees C to 140 degrees C, whereas there was a significant reduction in the other 3 sealers. At 37 degrees C, the setting time of AH Plus, iRoot SP, and RoekoSeal was 543.8 +/- 16.4, 245.8 +/- 15.9, and 49.3 +/- 1.5 minutes, and at 140 degrees C the setting time decreased significantly to 12.9 +/- 0.7, 14.2 +/- 0.6, and 2.7 +/- 0.4 minutes (P < .05). The flow of AH Plus increased when the temperature changed from 25 degrees C to 140 degrees C (P < .05), whereas the flow reduced for RoekoSeal and iRoot SP (for RoekoSeal from 24.8 +/- 0.9 to 12.4 +/- 1.3 mm and for iRoot SP from 22.9 +/- 0.9 to 13.3 +/- 1.5 mm) (P < .05). However, the flow of ZOE sealer was unaffected by the high temperature. ZOE sealer and iRoot SP exhibited a reduction of porosity at a high temperature (P < .05). Conclusions: Warm vertical compaction influenced some properties (the setting time, flow, and porosity) of 4 sealers. A significant reduction of setting time and flow was found in RoekoSeal and iRoot SP sealers at a high temperature.