Abstract:Magnetic pulse welding (MPW) is widely used in the connection of dissimilar metals. The welding process involves the coupling of the electromagnetic field and structural field, which is a high-energy transient forming process. Based on the current experimental methods, it is difficult to capture the relevant data in the process of magnetic pulse welding, and the transient forming mechanism of magnetic pulse welding needs to be further studied. Taking the magnetic pulse welding of an Al-Mg sheet as an example, based on the Ansoft Maxwell and ANSYS finite element simulation platform, the loose coupling method was used to analyze an electromagnetic field generated by the discharging capacitor bank and structural field of the Al-Mg sheet under the action of electromagnetic force. The discharge period of the magnetic pulse welding capacitor bank was 62 μs. The current direction in the aluminum sheet changed once half a cycle, and the direction of the electromagnetic force was always consistent with the Z-axis. Under the skin effect, the magnetic induction intensity on the lower surface of the aluminum sheet was the largest. At 16 μs, the induced current, electromagnetic force and magnetic induction intensity in the aluminum sheet reached the peak values, which were 7.89 A/m2, 4.58 N/m3 and 12.6 T, respectively. The maximum electromagnetic force and velocity in the structural field were 2400 KN and 300 m/s. The structure field simulation reproduces the transient forming process of magnetic pulse welding, and clarifies the formation mechanism of the "intermediate zone rebound uncomposite zone-welding bonding zone-unbound zone". Based on the numerical simulation technology, the research on the transient forming mechanism of magnetic pulse welding under multiphysics simulations can promote the development and application of magnetic pulse welding technology and better guide engineering practices.

Numerical analysis of electromagnetic welding for similar metals

Electromagnetic Ultrasonic Measurement for Welding Residual Stress Detection - Comparison Between Experiment with Numerical Simulation

Numerical Simulation of the Laser Welding Process for Electrical Steel Laminations

Numerical analysis of ultrasonic spot welding of metal sheets: a review

Temperature Simulation of Aluminium Alloy Double-Arc Welding Process on Simplified Conditions

Numerical Modeling Methods of Electromagnetic Forming and Analysis of Electromagnetic Tube-Compression

Numerical Modeling and Deformation Analysis for Electromagnetically Assisted Deep Drawing of AA5052 Sheet

Numerical Analysis of Projection Welding on Auto-Body Sheet Metal Using a Coupled Finite Element Method

Numerical Simulation of the Magnetic Pressure in Tube Electromagnetic Bulging

Multiphysics Numerical Simulation of the Transient Forming Mechanism of Magnetic Pulse Welding

Numerical modeling of industrial parts manufacturing using electromagnetic hemming process

Numerical Simulation of Magnetic Flux and Force in Electromagnetic Forming with Attractive Force

Numerical Analysis on Welding Deformation and Residual Stress of an Aluminum Alloy Floor of EMU Bodywork

Numerical Analysis of Single Sided Spot Welding Process Used in Sheet to Tube Joining

Numerical Simulation of Arc and Metal Transfer in Arc Welding Based Additive Manufacturing Assisted by External Longitudinal Static Magnetic Field

Numerical simulation and analysis of welding of drive axle housing and axle tube

Numerical investigation of the impact of thermoelectric effect on electron beam welding of dissimilar materials

Numerical Simulation on Flow and Heat Transfer in Weld Pool of Laser-Plasma Hybrid Welding

Calculation of Electromagnetic Force in Electromagnetic Forming Process of Metal Sheet

3D numerical simulation of linear friction welding of 45# carbon steel

Numerical Modeling of High Power MAG Welding on the Plate