Molecular Dynamics Simulations of Simple Aromatic Compounds Adsorption on Single-Walled Carbon Nanotubes

Han Ding,Xin Shen,Chao Chen,Xiaojian Zhang

DOI: https://doi.org/10.1039/c6ra12644h

IF: 4.036

2016-01-01

RSC Advances

Abstract:We have conducted MD simulations and RDG calculations to reveal the mechanisms of simple aromatic compounds adsorption on SWCNTs.

What problem does this paper attempt to address?

Ground States of Diatomic Molecules Adsorbed on Single-Walled Carbon Nanotubes

Yi Ding,Jun Ni

DOI: https://doi.org/10.1103/physrevb.74.235414

IF: 3.7

2006-01-01

Physical Review B

Abstract:We have studied the adsorption of diatomic molecules on graphite sheets and carbon nanotubes using Monte Carlo simulations. We have obtained the ground states for two-site dimer adsorption. On the high-coverage side, the ground states for dimer adsorption are highly degenerate. The complementary vacancy structures and the variation tendency of the ordered structures with increase of nanotube size are similar to those for single-site adsorption. On the low-coverage side, most dimer ordered structures are not degenerate. The confinement of nanotubes leads to helical ground-state structures for dimer adsorption.
Correlation and Prediction of Adsorption Capacity and Affinity of Aromatic Compounds on Carbon Nanotubes.

Wenhao Wu,Kun Yang,Wei Chen,Wendi Wang,Jie Zhang,Daohui Lin,Baoshan Xing

DOI: https://doi.org/10.1016/j.watres.2015.10.037

IF: 12.8

2015-01-01

Water Research

Abstract:Adsorption of 22 nonpolar and polar aromatic compounds on 10 carbon nanotubes (CNTs) with various diameters, lengths and surface oxygen-containing group contents was investigated to develop predictive correlations for adsorption, using the isotherm fitting of Polanyi theory-based Dubinin-Ashtakhov (DA) model. Adsorption capacity of aromatic compounds on CNTs is negatively correlated with melting points of aromatic compounds, and surface oxygen-containing group contents and surface area ratios of mesopores to total pores of CNTs, but positively correlated with total surface area of CNTs. Adsorption affinity is positively correlated with solvatochromic parameters of aromatic compounds, independent of tube lengths and surface oxygen-containing group contents of CNTs, but negatively correlated with surface area ratios of mesopores to total pores of CNTs. The correlations of adsorption capacity and adsorption affinity with properties of both aromatic compounds and CNTs clearly have physical significance, can be used successfully with DA model to predict adsorption of aromatic compounds on CNTs from the well-known physiochemical properties of aromatic compounds (i.e., solvatochromic parameters, melting points) and CNTs (i.e., surface area and total acidic group contents), and thus can facilitate the environmental application of CNTs as sorbents and environmental risk assessment of both aromatic contaminants and CNTs.
Mechanism simulation of polar and nonpolar organic solvent vapor adsorption on a multiwall carbon nanotubes paper gas sensor

Mengli Zhang,Shuhei Inoue,Yukihiko Matsumura

DOI: https://doi.org/10.1039/d4ra04474f

2024-08-09

Abstract:We investigate the adsorption behavior of polar and nonpolar molecules on carbon nanotube interfaces through computational simulations. Gaussian 16 was utilized to calculate the total energy of each possible molecular structure and analyze the adsorption mechanisms in stacked and inline configurations. The study reveals that nonpolar molecules favor stacked adsorption on two graphene interfaces, while polar molecules prefer inline adsorption. The findings suggest that inline adsorption of polar molecules results in minimal changes to the local dielectric constant, which may explain the absence of multi-step adsorption isotherms. The research examines the stability and energetics of molecular adsorption on graphene layers simulating CNT interfaces. Different types of molecules (polar and nonpolar) exhibit distinct adsorption behaviors, with nonpolar molecules aligning with the IUPAC type VI isotherm model and polar molecules following the Langmuir isotherm model (IUPAC type I). This study provides insight into how molecules are likely to adsorb on CNT surfaces and the impact on the local dielectric constant. This understanding has implications for the design and optimization of CNT-based sensors, particularly in detecting organic solvents and gases in various environments.
Adsorption Kinetics of Aromatic Compounds on Carbon Nanotubes and Activated Carbons

Shujuan Zhang,Ting Shao,H. Selcen Kose,Tanju Karanfil

DOI: https://doi.org/10.1002/etc.724

2011-01-01

Environmental Toxicology and Chemistry

Abstract:Adsorption kinetics of two organic compounds on four types of carbonaceous adsorbents (a granular activated carbon [HD4000], an activated carbon fiber [ACF10], a single-walled carbon nanotube [SWNT], and a multiwalled carbon nanotube [MWNT]) was examined in aqueous solutions. The times needed for the adsorption to reach apparent equilibrium on the four carbons followed the order of ACF10>HD4000>SWNT>MWNT. Ultrasonication of the carbon nanotubes (CNTs) accelerated their adsorption kinetics but had no effect on their equilibrium adsorption capacities. The pseudo-second order model (PSOM) provided good fitting for the kinetic data. The fitting of kinetic data with the intraparticle diffusion model indicated that external mass transfer controls the sorption process in the organic compoundCNT systems, whereas intraparticle diffusion dominates in the sorption of organic compounds onto activated carbons. Environ. Toxicol. Chem. 2012;31:7985. (C) 2011 SETAC
Quantitative Structure-Property Relationship Studies on the Adsorption of Aromatic Contaminants by Carbon Nanotubes

Liu Fen,Zou Jian-Wei,Hu Gui-Xiang,Jiang Yong-Jun

DOI: https://doi.org/10.3866/pku.whxb201406182

2014-01-01

Abstract:Ab initio calculations have been performed for a group of 59 aromatic compounds at the HF/6-31G* level of theory. Electrostatic potentials (ESPs) and the statistically based structural descriptors derived from ESPs on the molecular surface have been obtained. The linear relationships between the adsorption equilibrium constants of organic contaminants by carbon nanotubes and the theoretical descriptors have been established by multiple linear regression. It is shown that the quantities derived from electrostatic potentials, V-min, sigma(2)(+) and Sigma V-Ind(+) together with the molecular surface area (S) and the energy level of lowest occupied molecular orbital (epsilon(LUMO)) can be used to express the quantitative structure-property relationship (QSPR) of this sample set. All of the descriptors introduced in the QSPR models have definite physical meanings and their reasonability can be explained in terms of intermolecular interactions between the aromatic pollutants and carbon nanotubes or water. The stabilities and predictive powers of the models have been validated by "leave-one-out" and Monte Carlo cross-validation methods. Three nonlinear modeling techniques, namely supported vector machine (SVM), least-square supported vector machine (LSSVM), as well as Gaussian process (GP), have also been used to construct the predictive models. Though the SVM and LSSVM models exhibit strong fitting abilities, their predictive powers are inferior to the other models tested. The GP model yields the best fit and predictive ability among all of the models. Its advantage over the linear model, however, is not as remarkable as expected, which means that the relationship between the molecular structure and the adsorption property for the present system is primarily linear.
Monte Carlo Simulations Of Hydrogen Adsorption In Single-Walled Carbon Nanotubes

C Gu,Yx Yu,Gh Gao

2000-01-01

Abstract:The adsorption of hydrogen gas into single-walled carbon nanotubes (SWNTs) is studied by computer simulation. Hydrogen-hydrogen and hydrogencarbon interactions are both modeled with Lennard-Jones potential. Hydrogen-carbon interactions are integrated over the whole nanotube to get molecule-wall interactions. Grand canonical Monte Carlo simulation is used in calculation. Four adsorption isotherms of different tube diameters at 293K and one adsorption curve of different van der Waals (VDW) distances are displayed. Finally, the influence on adsorption of different SWNTs' diameters and VDW distances are discussed.
Adsorption of Nucleic Acid Bases and Amino Acids on Single-Walled Carbon and Boron Nitride Nanotubes: A First-Principles Study

Jiaxin Zheng,Wei Song,Lu Wang,Jing Lu,Guangfu Luo,Jing Zhou,Rui Qin,Hong Li,Zhengxiang Gao,Lin Lai,Guangping Li,Wai Ning Mei

DOI: https://doi.org/10.1166/jnn.2009.1315

2009-01-01

Journal of Nanoscience and Nanotechnology

Abstract:We study the adsorptions of nucleic acid bases adenine (A), cytosine (C), guanine (G), thymine (T), and uracil (U) and four amino acids phenylalanine, tyrosine, tryptophan, alanine on the single-walled carbon nanotubes (SWCNTs) and boron nitride nanotubes (SWBNNTs) by using density functional theory. We find that the aromatic content plays a critical role in the adsorption. The adsorptions of nucleic acid bases and amino acids on the (7, 7) SWBNNT are stronger than those on the (7, 7) SWCNT Oxidative treatment of SWCNTs favors the adsorption of biomolecules on nanotubes.
Molecular Simulation of Naphthalene, Phenanthrene, and Pyrene Adsorption on MCM-41

Xiong Yang,Chuanzhao Zhang,Lijun Jiang,Ziyi Li,Yingshu Liu,Haoyu Wang,Yi Xing,Ralph T. Yang,Ralph Yang

DOI: https://doi.org/10.3390/ijms20030665

IF: 5.6

2019-02-03

International Journal of Molecular Sciences

Abstract:The adsorption of three typical polycyclic aromatic hydrocarbons (PAHs), naphthalene, phenanthrene, and pyrene with different ring numbers, on a common mesoporous material (MCM-41) was simulated based on a well-validated model. The adsorption equilibriums (isotherms), states (angle distributions and density profiles), and interactions (radial distribution functions) of three PAHs within the mesopores were studied in detail. The results show that the simulated isotherms agreed with previous experimental results. Each of the PAHs with flat molecules showed an adsorption configuration that was parallel to the surface of the pore, in the following order according to the degree of arrangement: pyrene (Pyr) > phenanthrene (Phe) > naphthalene (Nap). In terms of the interaction forces, there were no hydrogen bonds or other strong polar forces between the PAHs and MCM-41, and the O–H bond on the adsorbent surface had a unique angle in relation to the PAH molecular plane. The polarities of different H atoms on the PAHs were roughly the same, while those of the C atoms on the PAHs decreased from the molecular centers to the edges. The increasing area of the π-electron plane on the PAHs with the increasing ring number could lead to stronger adsorption interactions, and thus a shorter distance between the adsorbate and the adsorbent.
Molecular Simulation of MCM-41: Structural Properties and Adsorption of CO2, N2 and Flue Gas

Yu Jing,Li Wei,Yundong Wang,Yangxin Yu

DOI: https://doi.org/10.1016/j.cej.2012.12.078

IF: 15.1

2013-01-01

Chemical Engineering Journal

Abstract:To investigate structural and adsorption properties of the MCM-41 molecular model more correctly, two effective MCM-41 models were built. The structural and morphological features of two atomistic models were systematically analyzed in terms of pore size distribution (PSD), X-ray diffraction (XRD), atomic relative concentration, partial radial distribution (RDF), ring distribution, pore surface smoothness, etc. Furthermore, the adsorption isotherms and isosteric heats of pure N2, CO2 and their mixture as flue gas (12% CO2 and 88% N2) adsorbed in MCM-41 models were calculated based on grand canonical Monte Carlo (GCMC) simulation. The simulated results were in good agreement with experimental ones. Finally, adsorbate morphology, adsorbed density and adsorbate location distribution were properly described by molecular simulation. The result confirmed the competitive adsorption behavior of CO2 over N2 and clearly revealed the microscopic detail: CO2 adsorption mainly depended on the surface functional group while N2 adsorption depended on the available pore volume. The proposed MCM-41 models can be used to guide further molecular designs for novel amine-functionalized MCM-41 adsorbents.
Molecular Dynamics Simulation of Motion of Single-Walled Carbon Nanotubes on Graphite Substrate

Li Rui,Hu Yuan-Zhong,Wang Hui,Zhang Yu-Jun

DOI: https://doi.org/10.7498/aps.55.5455

IF: 0.906

2006-01-01

Acta Physica Sinica

Abstract:Motion of single-walled carbon nanotubes on graphite substrate is investigated by using molecular dynamics simulation in this paper. Following a relaxation to the equilibrium state, a uniform force is applied to carbon nanotubes for a period of time to set them into motion. After the applied force being removed, carbon nanotubes move relative to the substrate in decelerating speed until they come to a full rest in the end. Different tube radius and chiral angles are selected during simulation. The results show that motion of carbon nanotubes is mainly affected by the chiral angle but independent of tube radius. When the chiral angle is 30°, periodic transition between sliding and rolling is observed due to the periodic change of atomic configuration during the motion. When chiral angle is between 28.3° and 30°, sliding and rotating take place at the same time. When chiral angle is less than 26.3°, only sliding is observed. Different chiral angles result in different atomic configurations in the contact region between carbon nanotubes and graphite substrate, which gives rise to different styles of motion.
Exploring structural requirements of simple benzene derivatives for adsorption on carbon nanotubes: CoMFA, GRIND, and HQSAR

Forough Mansouri,Nahid Sarlak

DOI: https://doi.org/10.1007/s11224-022-01973-5

2023-03-16

Structural Chemistry

Abstract:In this work, three quantitative structure–activity relationship (QSAR) methods involving comparative molecular field analysis (CoMFA) and GRid-INdependent Descriptors (GRIND) based 3D-QSAR and hologram QSAR (HQSAR) were evaluated for predicting adsorption coefficients of the simple benzene derivatives on mutiwalled carbon nanotubes (MWCNTs). The contour maps of CoMFA suggested that the steric hindrance had a significant impact on the adsorption process of substituted benzenes. GRIND studies investigate the important mutual distances between molecular features, which confirmed the role of hydrophobic groups as well as their distances from different steric hot spots in the benzene ring of the molecules. According to HQSAR model and its fragment contribution map, the hydrogen bond donor and acceptor were also found to play an important role in governing adsorption of substituted benzenes on CNTs. The CoMFA, GRIND, and HQSAR methods employed to build predictive 2D- and 3D-QSAR models for adsorption of simple benzene derivatives on CNTs in aqueous media successfully.

chemistry, multidisciplinary, physical,crystallography
Adsorption of single-ringed N- and S-heterocyclic aromatics on carbon nanotubes

Lilin Wang,Dongqiang Zhu,Lin Duan,Wei Chen

DOI: https://doi.org/10.1016/j.carbon.2010.06.057

IF: 10.9

2010-01-01

Carbon

Abstract:Adsorption of single-ringed N- and S-heterocyclic aromatics on single-walled carbon nanotubes (SWCNTs) was examined to explore the potential of using carbon nanotubes (CNTs) as drug carriers and environmental adsorbents. Adsorbates included pyrimidine, 2-aminopyrimidine, 4,6-diaminopyrimidine, thiophene, benzene and aniline. Adsorbents included pristine SWCNTs, oxidized SWCNTs, and nonporous graphite. Adsorption of N- and S-heterocyclic aromatics was significantly enhanced by non-hydrophobic interactions. Particularly, the –NH2-substituted compounds exhibited much stronger (up to 2 orders of magnitude) adsorption affinities to oxidized SWCNTs than benzene, even though they are much less hydrophobic. The π–π coupling or electron donor–acceptor (EDA) interactions are likely adsorption-enhancement mechanisms for all six compounds. The lone-pair electrons of the N heteroatoms and the –NH2 group can enable n–π EDA interactions with SWCNT surfaces. Lewis acid–base interactions are another significant adsorption-enhancement mechanism for the –NH2-substituted compounds (and possibly for pyrimidine) on SWCNTs. For the N-heterocyclic aromatics, adsorption affinity is highly dependent on the O-functionality of the SWCNT surface and on solution pH, due to the speciation reactions of both adsorbates and SWCNT surface O-functional groups, indicating that selective adsorption of N-heterocyclic aromatics is possible by combining the surface functionality of CNTs and solution chemistry.
Molecular Dynamics Study of Bamboo-like Carbon Nanotube Nucleation

Feng Ding,Kim Bolton,Arne Rosen

DOI: https://doi.org/10.1007/BF02692437

2006-07-31

Abstract:MD simulations based on an empirical potential energy surface were used to study the nucleation of bamboo-like carbon nanotubes (BCNTs). The simulations reveal that inner walls of the bamboo structure start to nucleate at the junction between the outer nanotube wall and the catalyst particle. In agreement with experimental results, the simulations show that BCNTs nucleate at higher dissolved carbon concentrations (i.e., feedstock pressures) than those where non-bamboolike carbon nanotubes are nucleated.

Materials Science
Parallel-slipped π-π electron-donor-acceptor in adsorption process: Molecular dynamics simulation

Zhen Chen,Wei Ma,Guang Lu,Jinglu Hu,Zhe Zhang,Baodong Wang,Zihong Cheng,Yuzhen Pan

DOI: https://doi.org/10.1016/j.jmgm.2021.108100

Abstract:Molecular dynamics simulation was used to study the adsorption of single wall carbon nanotubes (SCNT) in levofloxacin (LEV) solutions of different concentrations by Radial distribution function, mean square displacement and interaction energy. The results showed that levofloxacin molecules were adsorbed around the carbon nanotubes. The adsorption effect of large concentration solution was not as good as that of low concentration solution because of agglomeration. LEV molecules with different concentration were free diffusion within 15ns, and gradually agglomerated under the influence of adsorption. The energy change is proportional to the concentration of the molecule. The distance between benzene rings corresponding to the agglomeration effect of levofloxacin molecules was 0.4 nm, which should be the effect of parallel-slipped π-π electron-donor-acceptor (EDA) interactions. The simulation results are valuable to study the adsorption and removal of benzenes by adsorbent.
Effect of Ammonia Nitrogen and Low-Molecular-weight Organics on the Adsorption of Additives on Coal Surface: A Combination of Experiments and Molecular Dynamics Simulations

Shuangni Wang,Junhong Wu,Jianzhong Liu,Ning Li,Xianqing Zeng,Kefa Cen

DOI: https://doi.org/10.1016/j.ces.2019.04.042

IF: 4.7

2019-01-01

Chemical Engineering Science

Abstract:Experiments and molecular dynamics (MD) simulations were conducted to investigate the effect of ammonia nitrogen and low-molecular-weight organics on the adsorption of sodium lignosulfonate (SL) on Shenhua coal. Results of adsorption and adsorption film thickness experiments showed that ammonia nitrogen and low-molecular-weight organics have different effects on the adsorption of SL on coal surface, thus resulting in different adsorption configurations of SL. A ternary system that was composed of water–SL–Shenhua coal was established through MD simulation. The adsorption mechanism of SL on Shenhua coal in different solutions was explored, and the influencing factors were analyzed using a microscopic mechanism. Results showed that the adsorption conformations of SL molecules on coal surface in aqueous and low-molecular-weight organics solutions are single-layer and multi-point adsorption, whereas the adsorption conformations in ammonia nitrogen solutions are double-layer adsorption. The mechanism of the adsorption of SL molecule on Shenhua coal surface by ammonia nitrogen and low-molecular-weight organics was studied in detail. The calculation results of adsorption energy are consistent with the experimental results in thermodynamics. This result demonstrates the feasibility and accuracy of the MD simulation.
Quantitative Understanding of Van Der Waals Bonds by Analyzing the Adsorption Structure and LowFrequency Vibrational Modes of Single Benzene Molecules on Silver.

Dingwang Yuan,Zhumin Han,Gregory Czap,Chi-Lun Chiang,Chen Xu,W. Ho,Ruqian Wu

DOI: https://doi.org/10.1021/acs.jpclett.6b00894

2016-01-01

Abstract:The combination of a sub-Kelvin scanning tunneling microscope and density functional calculations incorporating van der Waals (vdW) corrections has been used successfully to probe the adsorption structure and low-frequency vibrational modes of single benzene molecules on Ag(110). The inclusion of optimized vdW functionals and improved C6-based vdW dispersion schemes in density functional theory is crucial for obtaining the correct adsorption structure and low-energy vibrational modes. These results demonstrate the emerging capability to quantitatively probe the van der Waals interactions between a physisorbed molecule and an inert substrate.
The Impacts of Aggregation and Surface Chemistry of Carbon Nanotubes on the Adsorption of Synthetic Organic Compounds

Shujuan Zhang,Ting Shao,S. Sule Kaplan Bekaroglu,Tanju Karanfil

DOI: https://doi.org/10.1021/es900453e

IF: 11.4

2009-01-01

Environmental Science & Technology

Abstract:Effects of aggregation and surface chemistry of carbon nanotubes (CNTs) on the adsorption of three synthetic organic compounds (SOCs), phenanthrene (PNT), biphenyl (BP), and 2-phenylphenol (2PP), were investigated using commercially available pristine and surface functionalized single-walled carbon nanotubes (SWNTs), and multiwalled carbon nanotubes (MWNTs). Theoretical calculations and nitrogen adsorption analysis results demonstrated that aggregation of CNTs led to a significant reduction in surface area (especially for the SWNTs), but a significant increase of pore volume (especially for the MWNTs) due to interstices trapped in the CNT aggregates. In contrast to the nitrogen gas adsorption, the liquid phase adsorption results indicated that the adsorption of SOCs by CNTs was controlled by available adsorption surface area rather than pore volume, and aggregation of CNTs was an unfavorable factor for the SOC adsorption. Surface functionalization of CNTs improved their dispersion in aqueous solutions, but decreased their adsorption capacities for the hydrophobic SOCs, which was attributed to the formation of water clusters around the oxygen-containing functional groups. Molecular configurations of SOCs also played a role in their adsorption. For the planar PNT, the SWNTs showed significantly higher adsorption capacities and site energies than the MWNTs, whereas for the nonplanar SOCs the adsorption capacity and site energy differences between the SWNTs and the MWNTs became smaller with increasing concentration of SOCs.
Molecular simulation of CH4 and CO2 adsorption behavior in coal physicochemical structure model and its control mechanism

Shuo Zhang,Xiaodong Zhang,Zhiming Wang,Xiao Liu,Shuai Heng,Yong Li,Zeyuan Sun

DOI: https://doi.org/10.1016/j.energy.2023.129474

IF: 9

2023-12-01

Energy

Abstract:In order to clarify the microscopic coupling mechanism among chemical composition and structure, nanopores and gas adsorption, this study used molecular simulation to investigate the adsorption behavior of CH4 and CO2 molecules in different coal physicochemical structure models under various environment conditions. The results show that with the dissolution of low molecular weight compounds (LMWCs), the absolute adsorption capacity for CO2 and CH4 in aromatic pores gradually increases, and slit pores show a more obvious promotional effect on gas adsorption. On the other hand, observing the radial distribution function(RDF) between the main functional groups in coal and CH4/CO2, oxygen-containing functional groups and aromatic structures display a significant impact on the distribution of gas molecules on coal surface, especially –COOH and -O- groups. While free LMWCs are easy to generate competitive adsorption with gas molecules. Further, on the basis of adsorption heat and energy changes in coal-gas system, it concludes that CH4 molecules on the coal surface always keep physical adsorption, but CO2 molecules are dominated by physical adsorption with weak chemical adsorption. Finally, the relationship among chemical composition and structure, nanopores and gas adsorption is established to reveal the microscopic coupling effect during gas adsorption.

energy & fuels,thermodynamics
Ab initio study of aspirin adsorption on single-walled carbon and carbon nitride nanotubes

Yongju Lee,Dae-Gyeon Kwon,Gunn Kim,Young-Kyun Kwon

DOI: https://doi.org/10.1039/c6cp08122c

IF: 3.3

2017-01-01

Physical Chemistry Chemical Physics

Abstract:Using density functional theory, we investigate the adsorption properties of acetylsalicylic acid (aspirin) on the outer surfaces of a (10,0) carbon nanotube (CNT) and a (8,0) triazine-based graphitic carbon nitride nanotube (CNNT).

chemistry, physical,physics, atomic, molecular & chemical
Enhanced Adsorption of Hydroxyl- and Amino-Substituted Aromatic Chemicals to Nitrogen-Doped Multiwall Carbon Nanotubes: A Combined Batch and Theoretical Calculation Study

Linzi Zuo,Yong Guo,Xiao Li,Heyun Fu,Xiaolei Qu,Shourong Zheng,Cheng Gu,Dongqiang Zhu,Pedro J. J. Alvarez

DOI: https://doi.org/10.1021/acs.est.5b04980

IF: 11.4

2016-01-01

Environmental Science & Technology

Abstract:A large effort is being made to develop nanosorbents with tunable surface chemistry for enhanced adsorption affinity and selectivity toward target organic contaminants. Heteroatom N-doped multiwall carbon nanotubes (N-MCNT) were synthesized by chemical vapor deposition of pyridine and were further investigated for the adsorptive removal of several aromatic chemicals varying in electronic donor and acceptor ability from aqueous solutions using a batch technique. Compared with commercial nondoped multiwall carbon nanotubes (MCNT), N-MCNT had similar specific surface area, morphology, and pore-size distribution but more hydrophilic surfaces and more surface defects due to the doping of graphitic and pyridinic N atoms. N-MCNT exhibited enhanced adsorption (2-10 folds) for the p-donor chemicals (2-naphthol and 1-naphthalmine) at pH similar to 6 but similar adsorption for the weak p-donor chemical (naphthalene) and even lower adsorption (up to a 2-fold change) for the p-acceptor chemical (1,3-dinitrobenzene). The enhanced adsorption of 2-naphthol and 1-naphthalmine to N-MCNT was mainly attributed to the favored p-p electron-donor-acceptor (EDA) interaction between the p-donor adsorbate molecule and the polarized N-heterocyclic aromatic ring (p-acceptor) on N-MCNT. The proposed adsorption enhancement mechanisms were further tested through the pH effects on adsorption and the density function theory (DFT) calculation. The results show for the first time that the adsorptive interaction of p-donor aromatic compounds with carbon nanomaterials can be facilitated by N-doping.

Molecular Dynamics Simulations of Simple Aromatic Compounds Adsorption on Single-Walled Carbon Nanotubes

Ground States of Diatomic Molecules Adsorbed on Single-Walled Carbon Nanotubes

Correlation and Prediction of Adsorption Capacity and Affinity of Aromatic Compounds on Carbon Nanotubes.

Mechanism simulation of polar and nonpolar organic solvent vapor adsorption on a multiwall carbon nanotubes paper gas sensor

Adsorption Kinetics of Aromatic Compounds on Carbon Nanotubes and Activated Carbons

Quantitative Structure-Property Relationship Studies on the Adsorption of Aromatic Contaminants by Carbon Nanotubes

Monte Carlo Simulations Of Hydrogen Adsorption In Single-Walled Carbon Nanotubes

Adsorption of Nucleic Acid Bases and Amino Acids on Single-Walled Carbon and Boron Nitride Nanotubes: A First-Principles Study

Molecular Simulation of Naphthalene, Phenanthrene, and Pyrene Adsorption on MCM-41

Molecular Simulation of MCM-41: Structural Properties and Adsorption of CO2, N2 and Flue Gas

Molecular Dynamics Simulation of Motion of Single-Walled Carbon Nanotubes on Graphite Substrate

Exploring structural requirements of simple benzene derivatives for adsorption on carbon nanotubes: CoMFA, GRIND, and HQSAR

Adsorption of single-ringed N- and S-heterocyclic aromatics on carbon nanotubes

Molecular Dynamics Study of Bamboo-like Carbon Nanotube Nucleation

Parallel-slipped π-π electron-donor-acceptor in adsorption process: Molecular dynamics simulation

Effect of Ammonia Nitrogen and Low-Molecular-weight Organics on the Adsorption of Additives on Coal Surface: A Combination of Experiments and Molecular Dynamics Simulations

Quantitative Understanding of Van Der Waals Bonds by Analyzing the Adsorption Structure and LowFrequency Vibrational Modes of Single Benzene Molecules on Silver.

The Impacts of Aggregation and Surface Chemistry of Carbon Nanotubes on the Adsorption of Synthetic Organic Compounds

Molecular simulation of CH4 and CO2 adsorption behavior in coal physicochemical structure model and its control mechanism

Ab initio study of aspirin adsorption on single-walled carbon and carbon nitride nanotubes

Enhanced Adsorption of Hydroxyl- and Amino-Substituted Aromatic Chemicals to Nitrogen-Doped Multiwall Carbon Nanotubes: A Combined Batch and Theoretical Calculation Study