Abstract:Deadbeat predictive current control (DBPCC) has the characteristic of fast current response, but it is sensitive to motor parameters. Observer-based DBPCC can eliminate the steady state current tracking error when parameter mismatch exists. However, the actual current will deviate from the reference current during transient state in the case of inductance mismatch. In this paper, a fast response robust deadbeat predictive current control (FRRDBPCC) method is proposed for surface mounted permanent magnet synchronous motor (SPMSM). Firstly, the current tracking error caused by inductance mismatch during transient state is analyzed in detail. Then, an extended state observer (ESO) is proposed to estimate the lumped disturbance caused by parameter mismatch. Based on discrete time ESO, the predicted currents are used to replace the sampled currents to compensate for one-step delay caused by calculation and sampling. Furthermore, an online inductance identification algorithm and a modified prediction model are proposed. The dq-axis currents can be completely decoupled by updating the inductance in the modified prediction model online, ensuring that the current can track the reference value in two control periods. The proposed method improves robustness against parameter mismatch and guarantees dynamic response performance simultaneously. The experimental results verify the effectiveness of the proposed method.

Robust Predictive Current Control with Online Disturbance Estimation for Induction Machine Drives

A Fast Response Robust Deadbeat Predictive Current Control for Permanent Magnet Synchronous Motor

Robustness Analysis and Enhancement of Deadbeat Predictive Control for Permanent Magnet Linear Synchronous Machines with Asymmetric Model

A Robust Deadbeat Predictive Current Control Method for IPMSM

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

Control Of Induction Motor Drive Based On Adrc And Inertia Estimation

Current Prediction Error Reduction Method of Predictive Current Control for Permanent Magnet Synchronous Motors.

Robust deadbeat predictive current control for unipolar sinusoidal excited SRM with multi-parameter mismatch compensation

A Modified Deadbeat Predictive Current Control with Improved Dynamic Performance under Insufficient Voltage Margin for IPMSM

A Combined Model Predictive Current Control for SPMSM Drive with Improved Robustness and Control Precision

Improved Deadbeat Predictive Current Control With Embedded Resonant Polynomial and Disturbance Observer for PMSM Current Distortion Rejection

A robust offset free model predictive current control for induction motor based on incremental model and incremental current observer

An Incremental Deadbeat Predictive Current Control Method for PMSM with Low Sensitivity to Parameter Variation

Research on Internal Model Control of Induction Motors Based on Luenberger Disturbance Observer

An Improved Robust Deadbeat Predictive Current Control for the Consequent-pole Hybrid Excitation Motor

Predictive Current Control for Induction Motor Using Online Optimization Algorithm with Constrains

Improved Deadbeat Predictive Current Control of PMSM Based on a Resistance Adaptive Position Observer

Robust Predictive Current Control of Hybrid-Excited Axial Flux-Switching PM Motor Based on Multiple-Resolution Parameter Identification

An Offset‐free Robust Model Predictive Control with Incremental Model and Improved Current Observer for Induction Motor

Predictive Current Control for Three Phase Induction Machine Using Multi-Steps Prediction Horizon

Model Predictive Current Control of Permanent Magnet Synchronous Motor Based on Sliding Mode Observer with Enhanced Current and Speed Tracking Ability Under Disturbance