Abstract:Recently the research on hydraulically actuated exoskeleton becomes an attractive topic for those application requirements of human performance augmentation. The control goal of this type of exoskeleton system is to minimize the human machine interaction force. And it becomes more challenging for hydraulically actuated lower limb exoskeleton where the multi-variable nonlinear dynamics is quite complicated and multiple walking phases are existing. Furthermore, since the exoskeleton is driven by the hydraulic actuators, the accurate output force tracking can not be easily realized due to the large compressibility of hydraulic oil. This paper focuses on the human machine interaction force control and the walking phase partition of the hydraulically actuated lower limb exoskeleton. Firstly, a cascade interaction force control strategy is proposed for a 3-DOF support leg which is the basic partitioned module of the lower limb exoskeleton. The spring model is built for the dynamics of human-machine interface, and a high level controller minimizing the integral of human-machine interaction force is designed to generate the desired joint trajectories of the exoskeleton which can be considered as the human motion intent. Subsequently, an independent joint based PID controller is developed in the low level to achieve the good tracking of the above generated human motion intent. Secondly, the exoskeleton system in different walking phases is partitioned into three serial chain manipulator modules. For each serial chain manipulator module, the proposed cascade interaction force controller is applied to minimize the human machine interaction force at the end effector. Finally, the walking experiments with 20Kg load on a practical hydraulically actuated lower limb exoskeleton are carried out to validate the effectiveness of the proposed approach.

Gait Planning And Hybrid Model Based Tracking Control Of Lower Extremity Exoskeleton

ZMP Theory-based Gait Planning and Model-Free Trajectory Tracking Control of Lower Limb Carrying Exoskeleton System

Non-linear Sliding Mode Control of the Lower Extremity Exoskeleton Based on Human–robot Cooperation

Real Time Gait Planning for a Mobile Medical Exoskeleton with Crutche.

Gait Planning and Multimodal Human-Exoskeleton Cooperative Control Based on Central Pattern Generator

Cascade Force Control of Lower Limb Hydraulic Exoskeleton for Human Performance Augmentation

Gait Tracking For Lower Extremity Exoskeleton Based On Sliding Mode Control With Cmac Compensation

Online Gait Generation for an Exoskeleton Used in Lower Limb Rehabilitation

Lower Limb Exoskeleton Hybrid Phase Control Based on Fuzzy Gain Sliding Mode Controller

Adaptive Gait Trajectory Based on Iterative Learning Control for Lower Extremity Rehabilitation Exoskeleton

Development of A Wearable Exoskeleton Rehabilitation System Based on Hybrid Control Mode

Modeling, Simulation & Control Of Human Lower Extremity Exoskeleton

Human-in-the-Loop Cooperative Control of a Walking Exoskeleton for Following Time-Variable Human Intention

Human-in-the-Loop Control of a Wearable Lower Limb Exoskeleton for Stable Dynamic Walking

Active Torque-Based Gait Adjustment Multi-Level Control Strategy for Lower Limb Patient-Exoskeleton Coupling System in Rehabilitation Training

Gait Trajectory Control Technology of the Lower Limb Exoskeleton Rehabilitation Robot

Control of the Exoskeleton’s Swing Leg Based on the Human-Machine Posture Error at Ankle Joint

Dynamic Balance Gait for Walking Assistance Exoskeleton

Hybrid Control Scheme of a Hydraulically Actuated Lower Extremity Exoskeleton for Load-Carrying

Fall preventive gait trajectory planning of a lower limb rehabilitation exoskeleton based on capture point theory

Dynamics simulation of lower extremity exoskeleton based on human gait