Abstract:The technology of Redox Flow Batteries is an important option to store energy from the operating irregularly renewable energy sources. The perspectives concern stationary energy storage, including grid-scale energy storage, thanks to their high power performance, flexible design, and ease of scaling-up. The flow-based electrochemical energy storage systems utilize the appropriate electroactive species dissolved in externally flowing electrolytes which are ready to accumulate all (or part) of the charge. Among important issues is the search for highly efficient (i.e., capable of fast electron transfers) electroactive systems that would yield high power and energy densities during the systems’ operation. Highly concentrated iodine/iodide system can act as redox conducting electrolyte. Furthermore its charge mediating capabilities has been recognized in the Dye Sensitized Solar Cell technology due to the feasibilioty of fast charge propagation accompanied by efficient electron self-exchange or diffusional-type electron hopping. In the present work, we concentrate on utilization of highly concentrated iodine/iodide redox systems and their possibility to exhibit high rates of charge propagation. In practical terms, it can be combined with ZnI 2, or other zinc salt, containing electrolyte. Reactions in the zinc/iodine (polyiodide) redox flow battery are as follows: Zn → Zn 2+ + 2e - (E = −0.76 V vs SHE) at the negative electrode (anode), and 3I - → I 3 − + 2e − (E = 0.54 V vs SHE) at the positive electrode (cathode) thus yielding a total theoretical potential output as high as ∼1.3 V. The increase of current density could be achieved not only by reducing the viscosity of the electrolyte, thus accelerating charge-carrier transport, but also – by referencing to my experience with the iodine/iodide couple as charge relay for dye-sensitized solar cells – through improvement of the dynamics of charge propagation in highly concentrated iodine/iodide solution via the catalyzed enhancement of rates of electron self-exchange (hopping) between iodine/iodide (polyiodide) redox species as well as by accelerating the interfacial kinetics at electrodes. This can be realized by choosing appropriate electrode materials and through their activation or modification. The electrochemical activities of the redox couples are usually significantly increased through application of nanostructured functionalized carbons. While dispersed in solutions they can improve electron transfers to the redox sites. The proposed chemistry has been first tested using the microelectrode methodology to determine mass-transport (effectively diffusional) coefficients for charge propagation, heterogeneous and homogeneous (electron self-exchange) rates of electron transfers. Unless catalyzed, both interfacial and bulk (self-exchange) electron transfers involving the iodine/iodide redox system are somewhat complicated; there is a need to break the I-I bond in the I 3 - or I 2 molecule; it has also been well-established that platinum (e.g. when deposited on the counter electrode) induces electron transfers within the iodine/iodide redox system [1]. In the presentation, we are going to explore the respective interfacial (electrocatalytic) phenomena on nanostructured metal oxides (e.g. zirconia), in addition to traces of expensive platinum or palladium nanoparticles (provided that catalytic centers are three-dimensionally distributed in the electrolyte phase), and we will utilize them to enhance iodine/iodide electron transfers to develop a new generation of redox mediators or ultra-fast components of redox electrolytes. Our results show that the catalyzed iodine/iodide system can reach extremely high electron self-exchange rates, namely on the level of 10 9 – 10 10 mol -1 dm 3 s -1 . [1] I.A. Rutkowska I.A., M. Marszalek, J. Orlowska, W. Ozimek, S.M. Zakeeruddin, P.J. Kulesza, M. Grätzel, ChemSusChem 8 (2015) 2560-2568.

Redox Cycling with Ito Electrodes Separated by an Ultrathin Silica Nanochannel Membrane

In Situ and 2D and 3D in Silico Redox Cycling Studies for Design Optimization of Coplanar Arrays of Microband Electrodes in a 70 μm × 100 μm Electroactive Footprint

Bidirectional Manipulation of Iodine Redox Kinetics in Aqueous Fe-I2 Electrochemistry

Reversible Chemical Tuning of Charge Carriers for Enhanced Photoelectrochemical Conversion and Probing of Living Cells

Electrochemical Characteristics of Reconstructed WO3 Electrodes by Embedding ITO Nanocrystals

Ionic Strength Gated Redox Current Rectification by Ferrocene Grafted in Silica Nanochannels.

Amperometric Response of Solid-Contact Ion-Selective Electrodes Utilizing a Two-Compartment Cell and a Redox Couple in Solution

Unraveling Mass and Electron Transfer Kinetics at Silica Nanochannel Membrane Modified Electrodes by Scanning Electrochemical Microscopy.

Redox cycling-based signal amplification at alkanethiol modified nanoporous gold interdigitated microelectrodes

Tuning Anionic/cationic Redox Chemistry in a P2-type Na0.67Mn0.5Fe0.5O2 Cathode Material Via a Synergic Strategy

Redox Couple Strategy for Improving the Oxygen Redox Activity and Reversibility of Li- and Mn-Rich Cathode Materials

Reuse of sodium–doped iridium oxide nanoparticles as a bio–stimulating electrode by a chemical and electrochemical recovery process

Potential Modulation and Control of Redox Reactions at Bipolar Electrodes Using an Ion-Selective Membrane

(Invited) Charge Propagation in Highly Concentrated Iodine/Iodide Solutions as Potential Redox Electrolytes and Mediators for Redox Flow Batteries and Solar Cells

Stable Cycling of Fe2o3 Nanorice As an Anode Through Electrochemical Porousness and the Solid-Electrolyte Interphase Thermolysis Approach

High Reversibility of Lattice Oxygen Redox Quantified by Direct Bulk Probes of Both Anionic and Cationic Redox Reactions

Bio-inspired design of an in situ multifunctional polymeric solid–electrolyte interphase for Zn metal anode cycling at 30 mA cm −2 and 30 mA h cm −2

Improving the True Cycling of Redox Mediators-assisted Li-O 2 Batteries

A Collaboratively Polar Conductive Interface for Accelerating Polysulfide Redox Conversion.

Non‐Solvent Induced Phase Separation Enables Designer Redox Flow Battery Electrodes

Direct electrochemical analysis in complex samples using ITO electrodes modified with permselective membranes consisting of vertically ordered silica mesochannels and micelles.