Abstract:The expanding urbanization of coastal areas has led to increased ocean sprawl, which has had both physical and chemical adverse effects on marine and coastal ecosystems. To maintain the health and functionality of these ecosystems, it is imperative to develop effective solutions. One such solution involves the use of biodegradable polymers as bioactive coatings to enhance the bioreceptivity of marine and coastal infrastructures. Our study aimed to explore two main objectives: (1) investigate PHA-degrading bacteria on polymer-coated surfaces and in surrounding seawater, and (2) comparing biofilm colonization between surfaces with and without the polymer coating. We applied poly(3-hydroxybutyrate) [P(3HB)) coatings on concrete surfaces at concentrations of 1% and 6% w/v, with varying numbers of coating cycles (1, 3, and 6). Our findings revealed that the addition of P(3HB) indeed promoted accelerated biofilm growth on the coated surfaces, resulting in an occupied area approximately 50% to 100% larger than that observed in the negative control. This indicates a remarkable enhancement, with the biofilm expanding at a rate roughly 1.5 to 2 times faster than the untreated surfaces. We observed noteworthy distinctions in biofilm growth patterns based on varying concentration and number of coating cycles. Interestingly, treatments with low concentration and high coating cycles exhibited comparable biofilm enhancements to those with high concentrations and low coating cycles. Further investigation into the bacterial communities responsible for the degradation of P(3HB) coatings identified mostly common and widespread strains but found no relation between the concentration and coating cycles. Nevertheless, this microbial degradation process was found to be highly efficient, manifesting noticeable effects within a single month. While these initial findings are promising, it’s essential to conduct tests under natural conditions to validate the applicability of this approach. Nonetheless, our study represents a novel and bio-based ecological engineering strategy for enhancing the bioreceptivity of marine and coastal structures.

Effect of Pseudomonas Putida on the Degradation of Epoxy Resin Varnish Coating in Seawater

Effect of Pseudomonas sp. on the degradation of aluminum/epoxy coating in seawater

Effects of Pseudomonas on the Deterioration of Polysiloxane Coating Containing Nano-Silica in Sea Water

Effect of Bacillus Flexus on the Degradation of Epoxy Resin Varnish Coating in Seawater

Insight into Degrading Effects of Two Fungi on Polyurethane Coating Failure in a Simulated Atmospheric Environment

Eco-friendly biodegradable polyurethane based coating for antibacterial and antifouling performance

Efficient and Robust Coatings Using Poly(2‐methyl‐2‐oxazoline) and Its Copolymers for Marine and Bacterial Fouling Prevention

Unraveling the detrimental effect of polymeric microcapsules on the corrosion performance of epoxy resin coatings

Degradation Behaviors of Two Epoxy Coatings after Dry/Wet-Accelerated Fog Exposure of Different Solutions

The degradation mechanism of a marine coating under service conditions of water ballast tank

Appraise the Degradation Characteristic of 7 PAM Degrading Bacteria

Effects of poly(3-hydroxybutyrate) [P(3HB)] coating on the bacterial communities of artificial structures

An imine‐functionalized silicone‐based epoxy coating with stable adhesion and controllable degradation for enhanced marine antifouling and anticorrosion properties

Marine Biofouling Resistance of Polyurethane with Biodegradation and Hydrolyzation

Process Study on the Preparation of Degradable Antifouling Paint Coatings by Solvent Method

Biodegradable Poly(ester- Co-Acrylate) with Antifoulant Pendant Groups for Marine Anti-Biofouling.

Effects of Hydrolyzable Comonomer and Cross-Linking on Anti-Biofouling Terpolymer Coatings

Specific Ion Effects on the Enzymatic Degradation of Polymeric Marine Antibiofouling Materials.

Decomposition of Perfluorooctanoic Acid from Wastewater Using Coating Electrode: Efficiency, the Anode Characteristics and Degradation Mechanism

Polyurethane, Epoxy Resin and Polydimethylsiloxane Altered Biofilm Formation and Mussel Settlement.

Degradation studies of epoxy coatings on printed circuit boards after pressure cooker test