Abstract:PurposeThe purpose of this paper is to present a control system for a heavy duty industrial robot, including both the control structure and algorithm, which was designed and tested.Design/methodology/approachAn industrial PC with TwinCAT real‐time system is chosen as the motion control unit; EtherCAT is used for command transmission. The whole system has a decoupled and centralized control structure. A novel optimal motion generation algorithm based on modified cubic spline interpolation is illustrated. The execution time and work were chosen as the objective function. The constraints are the limits of torque, velocity and jerk. The motion commands were smooth enough throughout the execution period. By using the Lagangue equation and assumed modes methods, a dynamic model of heavy duty industrial robots is built considering the elastic of both joints and links. After that a compound control algorithm based on singular perturbation theory was designed for the servo control loop.FindingsThe final experimental results showed that the control commands and algorithms could easily be calculated and transmitted in one sample unit. Both the motion generation and servo control algorithm greatly improved the control performance of the robot.Research limitations/implicationsAll parts of the control algorithm can be computed on‐line except the optimal motion generation part. The motion generation part is time consuming (about 2.5 seconds), which can only be performed off‐line. Hence future work will focus on improving the efficiency of this algorithm; therefore it could be performed online, increasing the robot's overall robustness and adaptability.Originality/valueAiming at the internal and external causes that limit the dynamic performance of heavy duty industrial robots, this paper proposes a realizable scheme of control system and includes both the control structure and algorithms. A novel optimal motion generation algorithm is presented.

Robust Controller Design for 90 Degrees Stand Motion of a Front-Wheel Drive Bicycle Robot

2DOF robust controller for four wheel steering systems of automobile

Design of a Two-wheeled Robot Controller Based on Homotopic Mapping

Performance-Oriented Coordinated Adaptive Robust Control For Four-Wheel Independently Driven Skid Steer Mobile Robot

Design of Low-Level Motion Controller for a Two-Wheel Mobile Mini-Robot

Robust controller design and experimental validation based on bounded uncertainty for collaborative industrial robots

Robust control of reaction wheel bicycle robot via adaptive integral terminal sliding mode

Dynamic modeling of wheeled biped robot and controller design for reducing chassis tilt angle

Modeling and Control of a Two-wheel Mobile Robot with Auxiliary Arms

H Infinity Robust Controller for Electric Bicycles

Model-Based Coordinated Control of Four-Wheel Independently Driven Skid Steer Mobile Robot with Wheel/Ground Interaction and Wheel Dynamics

Distributed Robust Control of Compliant Framed Wheeled Modular Mobile Robots

Steering Control and Stability Analysis for an Autonomous Bicycle through Reduced Dynamics with Servo-Constraints

Robust Controller Design for a Quadruped Walking Robot

Design and Implement of LQR Controller for a Self-Balancing Unicycle Robot

Combined control algorithm based on synchronous reinforcement learning for a self-balancing bicycle robot

Control System Design for Heavy Duty Industrial Robot

Model Decoupling and Control of the Wheeled Humanoid Robot Moving in Sagittal Plane

Dynamic Model Based Robust Tracking Control of a Differentially Steered Wheeled Mobile Robot

A Closed-Loop Dynamic Controller for Active Vibration Isolation Working on A Parallel Wheel-Legged Robot