Numerical Simulation of Ash Particle Deposition Characteristics on the Granular Surface of a Randomly Packed Granular Filter

Lei Guan,Zhulin Yuan,Zhongzhu Gu,Linjun Yang,Wenqi Zhong,Yunyun Wu,Shanshan Sun,Conghui Gu

DOI: https://doi.org/10.1016/j.powtec.2016.08.041

IF: 5.64

2017-01-01

Powder Technology

Abstract:In this paper, a randomly packed granular filtration model was built to investigate the mechanism of particle deposition on the granular surface, including the deposition positions, the backflow of particles and the relation with Stokes number. The deposition positions of particles of different size on the granular surface were exhibited, and the results showed that the diameters of particles deposited on the leeward side of the granule are smaller than 5μm. The deposition area is larger and more uniform for smaller particle deposited on the windward side of the granule and it leads to a higher pressure drop. Besides, the concentrations of particles smaller than 5μm linearly decrease with the height of the model between 50mm–78mm, and for the cases of lager than 15μm, they dramatically drop between 50mm–63mm and the decline rate gradually reduces to zero with respect to 78mm. Other cases of particle diameters between 5μm–15μm are between the above two situations. The Stokes number based on the inlet gas velocity versus the grade collection efficiency and the Stokes number based on the normal impaction velocity of particles versus the particle diameter are concluded to evaluate the filtration performance and the sticking probability of particles and they are expressed with two equations.