Abstract:Magnetoelastic biosensors have been studied for the past few years for use in detecting bacteria for food safety. These magnetoelastic biosensors are composed of a bio-molecular recognition element and transducer platform (magnetoelastic resonator). Phages (bio-molecular recognition element) have been developed to provide very specific binding with Salmonella typhimurium bacteria. However, there is some binding (non-specific binding) of bacteria to the gold areas not covered with phage on both the measurement and control sensors. In those areas, a blocking agent is necessary to reduce the non-specific binding. The purpose of this study is to compare three of the often used blocking agents, BSA, milk and casein in different concentrations to determine the agent and the optimum concentration for blocking. To accomplish this, a set of measurement and control sensors were prepared using identical procedures except the control sensors were not immobilized with phage. The measurement and control sensors were then coated with a blocking agent of concentrations ranging from 0.1 to 5 mg/mL. SEM observations show that coating the magnetoelastic biosensors with BSA at a concentration of 1mg/mL yields the largest amount of specific binding of bacteria cells while also maintaining the largest ratio of specific to non-specific binding. This binding characteristic is a result of the physical and electrical structure of the blocking proteins. To verify that the blocking solutions made good contact with the sensor's surface, contact angle measurements were used to evaluate the wettability of the surface. Changes in the resonant frequency of the biosensors were found to agree with the results from SEM observations. (C) 2012 The Electrochemical Society. [DOI: 10.1149/2.057210jes] All rights reserved.

Strategies for the Immobilization of Bacteriophages Applied in the Biosensors

Application of Biosensor Surface Immobilization Methods for Aptamer

Array‐Based Biosensors for Bacteria Detection: from the Perspective of Recognition

Effects of Surface Phage Coverage on the Performance of Wireless Phage-Immobilized Magnetoelastic Biosensors

Oriented immobilization of proteins on solid supports for use in biosensors and biochips: a review

Effects of surface functionalization on the surface phage coverage and the subsequent performance of phage-immobilized magnetoelastic biosensors

An overview of signal amplification strategies and construction methods on phage-based biosensors

Bacteriophage-Based Bioanalysis

Directional Immobilisation of SpyTag Bacteriophage on PDMS surfaces for Phage based Microfluidics

The Technology of Enzymatic Immobilization in Enzyme Biosensor

Application of immobilization technology in biosensors

Bacteriophages immobilized on electrospun cellulose microfibers by non-specific adsorption, protein–ligand binding, and electrostatic interactions

Immobilized Enzymes in Biosensor Applications

Immobilization of Escherichia Coli for Detection of Phage T4 Using Surface Plasmon Resonance

Blocking Agent Optimization for Nonspecific Binding on Phage Based Magnetoelastic Biosensors

Chapter 6. Phage-based Pathogen Biosensors

Strategies of Immobilizing Cells in Whole-cell Microbial Biosensor Devices Targeted for Analytical Field Applications

Recent advances in covalent, site-specific protein immobilization

Potential of bacteriophage proteins as recognition molecules for pathogen detection

Immobilization-Free Strategies for Designing of DNA-Based Electrochemical Biosensors

Phage M13KO7 detection with biosensor based on imaging ellipsometry and AFM microscopic confirmation