Abstract:<p>The application of helical baffle heat exchangers (HBHXs) is attracting much more attention in both industrial and academic fields. In this paper, the heat transfer and fluid flow characteristics of HBHXs are explored by the aid of numerical and experimental analyses, and a good agreement is reached between the simulated and measured data. A series of helical baffle configurations involving parameter combinations of helix angles (10°, 15°, 20°, 25°, 30°, 35°, 40°, 45°) and axial overlapped ratios (0, 10%, 20%, 30%, 40%, 50%) are taken into account. Then a multi-objective genetic algorithm approach is proposed for HBHXs optimization design. The tube number, tube outer diameter, tube length, helix angle and axial overlapped ratio are perceived as design variables, and the revised entropy generation number and total cost are considered as objective functions. The results illustrate that the thermal enhancement and axial velocity reduction are attributed to diminished helix angle and enlarged axial overlapped ratio. For the sake of a narrow helix pitch, the baffle schemes of 45° helix angle together with no more than 20% axial overlapped ratio are given priority over the one of 40° helix angle, while the schemes of 40° helix angle as well as at most 30% axial overlapped ratio are preferable to the one of 30° helix angle in view of better shell-side comprehensive performance. A set of Pareto optimal solutions are obtained in order to trade off the thermodynamic and economic behaviors, and the optimized results make known that the multi-objective optimization method is more suitable compared with the single-objective optimization strategy.</p>

Numerical Investigation of the Performances of Axial Separation Helical Baffle Heat Exchangers

Numerical Study on Hydrodynamics, Mixing and Heat Transfer of Highly Viscous Fluid in a Novel Shell-and-tube Heat Exchanger with X-type Baffles

Numerical investigation and experimental validation of thermo-hydraulic and thermodynamic performances of helical baffle heat exchangers with different baffle configurations

Numerical Study on Thermal Performance of a BOG Heat Exchanger in the Inclined Condition

Experimental Study of Effects of Baffle Helix Angle on Shell-Side Performance of Shell-and-tube Heat Exchangers with Discontinuous Helical Baffles

Effects of Baffle Inclination Angle on Flow and Heat Transfer of a Heat Exchanger with Helical Baffles

Performance investigation and multi-objective optimization of helical baffle heat exchangers based on thermodynamic and economic analyses

Experimental Performance Comparison of Shell-Side Heat Transfer for Shell-and-tube Heat Exchangers with Middle-Overlapped Helical Baffles and Segmental Baffles

Flow Characteristics and Heat Transfer Performances of Quadrant Helical Baffle Heat Exchanger with Grooved Joint

Numerical investigation on baffle configuration improvement of the heat exchanger with helical baffles

Flow and heat transfer performance of shell-and-tube heat exchangers with fold helical baffles

Experimental Investigation on Heat Transfer Enhancement of A Heat Exchanger with Helical Baffles Through Blockage of Triangle Leakage Zones

Numerical Analysis on Performances of Shell Side in Segmental Baffles, Helical Baffles and Novel Clamping Anti-Vibration Baffles with Square Twisted Tubes Shell and Tube Heat Exchangers

Experimental Investigation on Performance Comparison for Shell-and-tube Heat Exchangers with Different Baffles

Design and Optimization of Heat Exchangers with Helical Baffles

3D Numerical Simulation on Shell-and-tube Heat Exchangers with Middle-Overlapped Helical Baffles and Continuous Baffles – Part I: Numerical Model and Results of Whole Heat Exchanger with Middle-Overlapped Helical Baffles

Numerical investigation of the performance of perforated baffles in a plate-fin heat exchanger

Experimental thermal-hydraulic performances of heat exchangers with different baffle patterns

Numerical study on heat transfer and resistance performance of heat exchangers with perforated-baffle structure

Blockage of triangle leakage zones in heat exchanger with helical baffles

Experimental Performance Comparison of Shell-Side Heat Transfer for Shell-And-Tube Heat Exchangers with Different Helical Baffles