Abstract:Using stereo synthetic aperture radar (SAR) to extract 3-D information has become an important means of continuously improving the spatial resolution and geometric positioning accuracy of spaceborne SAR. However, owing to the large differences in a stereo configuration, such as intersection angle (ITA), it is difficult to guarantee localisation accuracy. This study proposed a method for analysing the stereoscopic intersection capability and verifying the accuracy of spaceborne SAR images. The method is improved from three aspects. First, it considers the complexity of the OPSS and SASS modes and discusses the two cases separately in the theoretical modeling and experimental analysis. Secondly, in the theoretical modeling stage, the error is no longer simplified as originating from only one image, but all images have errors. Finally, the validity of the modeling conclusions is verified using multiple sets of simulated experiments and real SAR experiments. Experiments show that stereo SAR has more potential than single SAR. In the opposite-side stereo (OPSS) mode, the planimetric positioning accuracy of 35.028 m (single SAR) can be improved to 3.132 m (stereo SAR, optimal 1.641 m). By designing a reasonable stereo configuration, the geometric positioning accuracy of the original data can be significantly reduced by 31.896 m. In addition, the results show that, (1) for the symmetric OPSS mode, the planimetric accuracy can be improved, and an increase in the ITA will decrease the vertical accuracy. (2) For the same-side stereo (SASS) mode, the smaller the ITA, the higher the planimetric accuracy (except for a weak ITA). In addition, if the incidence angle (ICA) is fixed, an increase in the ITA increases the vertical accuracy. (3) The base-to-height ratio is not the only prerequisite for the stereo configuration. The recommended ITA value for symmetric OPSS mode is 52–80°, and the suggested ITA threshold for SASS mode is 10–21°. The theoretical results are generally compatible with the previous achievements, which can guide applications such as ground control point production, DSM generation, and 3-D information extraction.

Positioning of Airborne Stereo Sar Images with Pos Data and One Gcp

Improvement of the spaceborne synthetic aperture radar stereo positioning accuracy without ground control points

A study of high-precision stereo positioning with multi-scene and multi-mode GF-3 satellite images

Geometric Accuracy Improvement Method for High-Resolution Optical Satellite Remote Sensing Imagery Combining Multi-Temporal SAR Imagery and GLAS Data

Study on the Geolocation Algorithm of Space-Borne Sar Image

Geometric Calibration and Geolocation of Airborne SAR Images

GEOMETRIC ANALYSIS OF SINGLE SAR REMOTE SENSING IMAGE POSITIONING

Spaceborne SAR stereoscopic intersection capability analysis and accuracy verification

Automatic Gcp Extraction in Mountainous Areas Using Dem and Polsar Data

Two-sided long baseline radargrammetry from ascending-descending orbits with application to mapping post-seismic topography in the west Sichuan foreland basin

High Precision Airborne Sar Geometric Calibration And Geolocation Based On An Improved Near Range Model

Exploiting High Geopositioning Accuracy of SAR Data to Obtain Accurate Geometric Orientation of Optical Satellite Images

A generic framework for improving the geopositioning accuracy of multi-source optical and SAR imagery

A Novel Stereo Positioning Feedback Method for Multi-Image Radargrammetric DSM Generation

Hybrid Source Photogrammetry of Optical Remote Sensing Images and Space-Borne LiDAR

Geolocation Accuracy Validation of High-Resolution SAR Satellite Images Based on the Xianning Validation Field

Block Adjustment of Orientation Parameters and Interferometric Parameters Using Very High-Resolution SAR Data for DSM Mapping

Satellite Remote Sensing Image Stereoscopic Positioning Accuracy Promotion Based on Joint Block Adjustment with ICESat-2 Laser Altimetry Data

Geo-Positioning Accuracy Improvement of Multi-Mode GF-3 Satellite SAR Imagery Based on Error Sources Analysis

Airborne Platform Three-Dimensional Positioning Method Based on Interferometric Synthetic Aperture Radar Interferogram Matching

No Ground Control Point Making the Orthophoto for the UAV Remote Sensing System