Abstract:Ultra-wideband millimeter-wave (mmWave) propagation measurements were conducted in the 28- and 73-GHz frequency bands in a typical indoor office environment in downtown Brooklyn, New York, on the campus of New York University. The measurements provide large-scale path loss and temporal statistics that will be useful for ultra-dense indoor wireless networks for future mmWave bands. This paper presents the details of measurements that employed a 400 Megachips-per-second broadband sliding correlator channel sounder, using rotatable highly directional horn antennas for both co-polarized and cross-polarized antenna configurations. The measurement environment was a closed-plan in-building scenario that included a line-of-sight and non-line-of-sight corridor, a hallway, a cubicle farm, and adjacent-room communication links. Well-known and new single-frequency and multi-frequency directional and omnidirectional large-scale path loss models are presented and evaluated based on more than 14 000 directional power delay profiles acquired from unique transmitter and receiver antenna pointing angle combinations. Omnidirectional path loss models, synthesized from the directional measurements, are provided for the case of arbitrary polarization coupling, as well as for the specific cases of co-polarized and cross-polarized antenna orientations. The results show that novel large-scale path loss models provided here are simpler and more physically based compared to previous 3GPP and ITU indoor propagation models that require more model parameters and offer very little additional accuracy and lack a physical basis. Multipath time dispersion statistics for mmWave systems using directional antennas are presented for co-polarization, crosspolarization, and combined-polarization scenarios, and show that the multipath root mean square delay spread can be reduced when using transmitter and receiver antenna pointing angles that result in the strongest received power. Raw omnidirectional path loss data and closed-form optimization formulas for all path loss models are given in the Appendices.

28-Ghz Path-Loss Measurement and Modeling in Indoor Environments

Channel Measurement and Path-Loss Characterization for Low-Terahertz Indoor Scenarios

Comparison on Channel Characteristics at 3.5 GHz and 28 GHz

Path Loss Model Based on Cluster at 28 GHz in the Indoor and Outdoor Environments

Indoor Office Plan Environment and Layout-Based MmWave Path Loss Models for 28 GHz and 73 GHz

Height-Dependent Path Loss Model And Large-Scale Characteristics Analysis Of 28 Ghz And 38.6 Ghz In Urban Micro Scenarios

Millimeter-wave Channel Measurement and Spatial Characteristics for Indoor Environments

28 GHz Indoor Channel Measurements and Modelling in Laboratory Environment Using Directional Antennas

Path Loss Measurement of Outdoor Wireless Channel in D-band

Path Loss and Directional Gain Measurements at 28 GHz for non-Line-of-Sight Coverage of Indoors with Corridors

Measurements and Ray Tracing Simulations for Non-Line-of-Sight Millimeter-Wave Channels in a Confined Corridor Environment

Outdoor to Indoor Penetration Loss at 28 GHz for Fixed Wireless Access

Multi-Frequency Millimeter-Wave Large-Scale Path Loss Characterization for Indoor Environment

Measurement-Based Propagation Characteristics At 28 Ghz And 39 Ghz In Suburban Environment

Channel Measurement and Analysis in an Indoor Corridor Scenario at 300 GHz

Dynamic Channel Modeling for an Indoor Scenario at 23.5 GHz.

Indoor Office Wideband Millimeter-Wave Propagation Measurements and Channel Models at 28 and 73 GHz for Ultra-Dense 5G Wireless Networks.

Channel Measurement and Ray-Tracing-Statistical Hybrid Modeling for Low-Terahertz Indoor Communications

Millimeter Wave and Sub-THz Indoor Radio Propagation Channel Measurements, Models, and Comparisons in an Office Environment

45Ghz Propagation Channel Modeling for an Indoor Conference Scenario.