Abstract:Ni-Mn-Ga ferromagnetic shape memory alloys (FSMAs) have attracted great attention for more than two decades, due to their large magnetic shape memory effect that originates from the rearrangement of martensitic variants under an external magnetic field. Over the past decade, accumulated knowledge on the properties of Ni-Mn-Ga Heusler alloys has allowed people to foresee the possibility of employing these alloys in device applications. However, the low operating temperatures and high brittleness remain the major drawbacks for the industrial application. Consequently, there has been growing interest in the modification of Ni-Mn-Ga alloys by adding a fourth element to increase transformation temperatures and to improve ductility. A recent study shows that the ductility has been effectively improved in Cu-doped Ni-Mn-Ga alloy under the situation of single phase via strengthening grain boundaries. In addition, the crystal structure, martensitic transformation, magnetic properties, high temperature magnetoplasticity and magnetocaloric effect have been reported in Ni-Mn-Ga-Cu alloys. Experimental results have shown that the martensitic transformation temperature (T-m) is drastically increased and the Curie temperature (T-c) slightly decreased with Cu addition. As already known, the alloying elements affect both the crystal and electronic structures and hence the stability of austenite and martensite phases. Therefore, knowledge of the effects of Cu addition is of great importance to understand the composition dependence of T-m and T-c. First-principles calculation results on Ni8Mn4-xGa4Cux (x=0, 0.5, 1, 1.5 and 2) ferromagnetic shape memory alloys of this research draw following conclusions. The added Cu atom preferentially occupies the Mn site. The formation energy results indicate that ferromagnetic austenite is more stable than the paramagnetic one. The ferromagnetic state becomes instable and paramagnetic state becomes more stable when Mn is gradual substituted by Cu. The evaluated T-c decreases with increasing Cu content that is derived from the decrease of total energy difference between the paramagnetic and the ferromagnetic austenite. The experimentally observed decrease of T-m is originated from the decrease of total energy difference between the austenite and the non-modulated martensite. The difference between the up and down DOS is reduced with the increasing Cu content that gives rise to the decrease of the total magnetic moments. The purpose of this work is to explore the influence of Cu addition on crystal structure, T-m, T-c and electronic structures of Ni8Mn4-xGa4Cux (x=0, 0.5, 1, 1.5 and 2) alloys by first-principles calculations, aiming at providing theoretical data and directions for developing high performance FSMAs.

First-Principles Prediction of Structural, Mechanical and Magnetic Properties in Ni2mnal

Effect of Alloying Element Al Substitution on Ni-Mn-Sn Shape Memory Alloy by First-Principle Calculations

Defect formation energy and magnetic properties of off-stoichiometric Ni-Mn-In alloys by first-principles calculations

A First-Principles Study on Crystal Structure, Phase Stability and Magnetic Properties of Ni-Mn-Ga-Cu Ferromagnetic Shape Memory Alloys

Magnetic Order and Lattice Instabilities in Ni$_{2}$Mn$_{1+x}$Sn$_{1-x}$ Heusler based Magnetic Shape-Memory Alloys

Banded-like Morphology and Martensitic Transformation of Dual-Phase Ni–Mn–In Magnetic Shape Memory Alloy with Enhanced Ductility

First-principles investigation of magnetic property and defect formation energy in Ni-Mn-Ga ferromagnetic shape memory alloy

Structural Modulations and Magnetic Properties of Off-Stoichiometric Ni-Mn-Ga Magnetic Shape Memory Alloys

Uncovering the origin of physical properties associated with magneto-structural transition of Ni-Mn-In- X alloys by ab initio methods

Unified physical mechanism for martensitic phase transition and ductility in Ni–Mn-based ferromagnetic shape memory alloys: the case of Cu-doped Ni2MnGa

Drastic Change In Density Of States Upon Martensitic Phase Transition For Metamagnetic Shape Memory Alloy Ni2mn1+Xin1-X

The Martensitic Transformation, Magnetocaloric Effect, and Magnetoresistance in High-Mn Content Mn47+xNi43−xSn10 Ferromagnetic Shape Memory Alloys

An Alloying Strategy for Tuning Magnetism, Thermal Hysteresis, and Mechanical Properties in Ni-Mn-Sn-based Heusler Alloys

Giant magnetoresistance, magnetostrain and magnetocaloric effects in a Cu-doped -textured Ni45Co5Mn36In13.2Cu0.8 polycrystalline alloy

Martensitic Transformation And Phase Stability Of In-Doped Ni-Mn-Sn Shape Memory Alloys From First-Principles Calculations

Study of structural, elastic, electronic, optical and magnetic properties of Heusler Mn2NiAl: Ab initio calculations

Phase Transitions, Magnetocaloric Effect and Magnetoresistance in Ni–Co–Mn–Sn Ferromagnetic Shape Memory Alloy

Recent Progress in Crystallographic Characterization, Magnetoresponsive and Elastocaloric Effects of Ni-Mn-In-Based Heusler Alloys—A Review

Magnetic Properties and Structural Phase Transformations of NiMnGa Alloys

Electronic origin of the main-group element dependences of elastic moduli in the Ni2Mn-based magnetic shape memory alloys

Enhancing Stability, Magnetic Anisotropy, and Coercivity of $τ$-L$1_0$ MnAl: Machine Learning, $\textit{Ab Initio}$, and Micromagnetic Modeling