Abstract:Although the probability of a rollover accident is lower than that of other forms of collision, rollover is a serious accident that can break the symmetry of the vehicle and cause serious loss of life and property. There are many factors affecting rollovers, such as the environment, the vehicle, and the driving control. A coach comprises a complex dynamic system; as such, the accuracy and rationality of the used mathematical model are decisive in the study of coach rollover warning and control. By analogy with the modeling method of an automobile collision accident, the general process of a coach rollover accident is analyzed in this study in combination with the contact form and freedom of motion characteristic of the coach body and external environment. According to the principle of conservation of energy, the mathematical models of critical rollover impact force in a collision between vehicles and obstacles and in a collision between two vehicles are established, allowing for analysis of the relationships between the critical tripped rollover impact forces required for a 90° rollover and the continuous action time and collision point height. During the collision between the vehicle and the obstacle, the occurrence of a vehicle rollover is related not only to the impact force in the collision process but also to the collision duration time. Even if the impact force is relatively small, the collision lasts long enough that a second collision may occur until the vehicle rolls over. In the process of a two-vehicle collision, the critical rollover impact force is not only related to the vehicle mass but also to the vehicle wheelbase and the height of the collision point. Based on the law of conservation of momentum, the mathematic models of 90-degree rollover and 180-degree rollover are established, and the critical rollover velocities are calculated. The purpose of this study is to provide reference and guidance for the research methods of vehicle rollover stability and anti-rollover control in the intelligent vehicle era.

Consistency of Calculation Results of Two Typical Vehicle Collision Models

Impact Tests of Model RC Columns by an Equivalent Truck Frame

The Key Parameters Calculation of Auto-body Oriented to Accident Analysis

Test and Numerical Simulation of Truck Collision with Anti-Ram Bollards

Improvement of Contact Force Calculation Model Considering Influence of Yield Strength on Coefficient of Restitution

Study on Accident Reconstruction Model Based on Reverse-Reasoning Method

Virtual Reconstruction of Two Types of Traffic Accident by the Tire Marks

On the Mutual Coefficient of Restitution in Two Car Collinear Collisions

A Comparative Study of the Dissipative Contact Force Models for Collision under External Spring Forces

Study of 3-D Simulation and Reconstruction of Vehicle-Bicycle Collision Accident

Research on Mathematical Modeling of Critical Impact Force and Rollover Velocity of Coach Tripped Rollover Based on Numerical Analysis Method

Scale similitude rules with acceleration consistency for trains collision

Research of Non-Linear Frictional Contact Model in Vehicle-Pedestrian Accidents Based on Computer Simulation

A New Roller Model for Traffic Accident Reconstruction

A method of reverse and revision of material mechanics performance parameters for vehicle collision simulation

Dynamic performance and safety analysis of car-following models considering collision sensitivity

An Update on the Momentum 360 Method of Vehicle Impact Reconstruction through 3D Modeling and Computer Simulation

A Method of Reconstruction of Vehicle Collision Accidents Based on Body Deformation

Reconstruction of Car-Pedestrian Collision Based on Computer Simulation

Sensitivity Analysis of the Coupled Dynamic Behavior of Vehicles in Collision with Semirigid Guardrails

Traffic Accident Reconstruction of A Van-Motor Vehicle Collision Oriented to Passenger Injury