Abstract:High Temperature Superconducting (HTS) tapes have crucial applications for generating high magnetic fields with minimal power input. Given a single tape has a limited current-carrying capacity, stacked tapes are common, fabricated through methods like solder soldering or epoxy impregnation requiring heat treatment. In this work, we have investigated the efficient region for vacuum heat treatment applicable of commercial HTS tapes, analyzed the thermal degradation principles and accordingly proposed a controlled heat treatment process for stacked HTS tapes to achieve more precise regulation of the critical current (I_c). This heat treatment process was explored using a specialized multi-temperature zone vacuum system. Critical parameters in this process include heat treatment temperature, duration and pressure on the tape. A series of experiments were conducted at 77 K in a self-field to investigate how these parameters affect the superconductivity performance of stacked HTS tapes. Based on the experimental results, an optimal heat treatment process has been proposed. Under the current process, with the heat treatment temperature set at 200 °C, duration at 20 min, and pressure on the tape at 12 MPa, the samples exhibit favourable properties characterized by a smooth and neat appearance without defects such as pinholes or false soldering, and the superconductivity performance can be consistently maintained at more than 97%. The obtained measurements were compared with simulated results, demonstrating an error margin within 0.5%. Moreover, precise control of I_c is achieved, tailored to tape and stacking specifications, allowing manageable degradation as required. This heat treatment process for stacked HTS tapes holds significant importance, especially in the context of designing cable-in-conduit conductors (CICCs) fabricated with stacked HTS tapes. It serves as a valuable reference for further advancements in this field.

Design of a Pancake-Type Superconducting Tape Winding According to Heat Diffusion Ability

Comparison Between KAPTON Polyimide Insulation Layers and Nylon Plates in Superconducting Tapes Winding

The Design and Winding Method of A Conduction-Cooled 1.5 T Bi-2223 High Temperature Superconducting Magnet

Lamination process of second generation high temperature superconducting tape at Shanghai Superconductor Technology

Design and Development of Turn Insulation Automatic Wrapping System for CRAFT TF

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Thermal degradation analysis and optimization of controlled heat treatment for stacked high temperature superconducting tapes

Development of high-performance iron-based superconducting wires and tapes

Fabrication of Racetrack-Type Double-Pancake Coils Using 2g Tapes and Online Mechanical Shock Test

Progress in fabrication of second generation high temperature superconducting tape at Shanghai Superconductor Technology

Study on the Influencing Factors to Reduce the Recovery Time of Superconducting Tapes and Coils for the DC Superconducting Fault Current Limiter Applications

The Optimal Design of a 300~MJ Superconducting Magnet Using HTS Tapes

The Flux Pumping Behavior of High Temperature Superconducting Tapes with a Linearly Moving Electromagnet

The Optimal Design Of A 300mj Superconducting Magnet Using Hts Tapes

Optimization of heating profile for superconductor joint performance made by resistive joule heating process

Design and optimization of low-resistance YBCO superconducting joint

Rebalance of Superconducting Tapes in Parallel Connection

Simulation of Current Profile and AC Loss of HTS Winding Wound by Parallel-Connected Tapes

Recovery Time of High Temperature Superconducting Tapes Exposed in Liquid Nitrogen

Investigation on Drawing Process of Bi-2223/Ag Wires Using Racetrack-Type Dies: Simulation and Experiments

Fabrication and Transport Properties of 100 m Class Sr0.6K0.4Fe2As2 Wires and Pancake Coils