Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

Effects of Cr and W Additions on the Stability and Migration of He in Bcc Fe: A First-Principles Study

Effect of Ti/Cr Additive on Helium Diffusion and Segregation in Dilute Vanadium Alloys

Effect of helium and vacancies in a vanadium grain boundary by first-principles

The influence of Cr on He trapping behavior and the coupling effect of Cr/He on the mechanical behavior of the C14-Laves Fe2W phase: First–principle and quasi-harmonic approximation studies

Interaction of He with Cu, V, and Ta in Bcc Fe: A First-Principles Study

First-Principles Study of Helium Trapping in Carbide Precipitates (cr23c6) in Ferritic-Martensitic Steels

Thermal expansion, lattice vibration, and isotope effect on hydrogen diffusion in BCC Fe, Cr, and W from first-principles calculations

Theoretical study on the influence of Cr, Mo, and W alloying additions on the helium behavior in nickel

First-principles Investigation into the Effect of Cr on the Segregation of Multi-H at the Fe Σ3 (111) Grain Boundary

Effects of Co and Cr on bcc Fe grain boundaries cohesion from first-principles study

Effect Of Alloying Additions On The Hydrogen-Induced Grain Boundary Embrittlement In Iron

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

First-principles study on the solute-induced low diffusion and self-trapping of helium in fcc iron

The influence of transition metal solutes on dislocation core structure and values of Peierls stress and barrier in tungsten

First-principle study of interstitial atoms (C, B and Si) in CrFeCoNi high entropy alloy

Effect Of W On Structural Stability Of Tial Intermetallics And The Site Preference Of W

Enhancing the mechanical properties of casting eutectic high-entropy alloys via W addition

First-principles Study of Interface Stability and Behaviors of He at the W/Y2O3 Interface

First-principles study of intrinsic defects and helium in tungsten trioxide

The Effect of W Content on the Microstructure, Mechanics and Electrical Performance of an FeCrCo Alloy

Suppressing/enhancing effect of rhenium on helium clusters evolution in tungsten: Dependence on rhenium distribution