Abstract:The resonant micro-optical gyroscope has advantages in miniaturization and integration compared with other gyroscopes. The back-reflection noise is one of the main optical noises restricting the sensitivity of the resonant micro-optical gyroscope which mainly comes from the coupling points between the waveguide ring resonator and the tail fiber. The model of the back-reflection noise of the resonant micro-optical gyroscope based on the reflection-type waveguide ring resonator is established. The influences of the intensity item and the interference item of the back-reflection noise under the reciprocal system and the nonreciprocal system are analyzed, respectively. When the resonant micro-optical gyroscope system is reciprocal, the intensity item of the back-reflection noise has the same impact on the frequency deviation of the clockwise and the counter clockwise lightwave which counteracts, so it has no impact on measuring the rotation rate. When the system is nonreciprocal, the intensity item of the back-reflection noise introduces the noise of the magnitude of 10 degrees/s. The interference item of the back-reflection noise introduces the noise of the magnitude of 257 degrees/s and 261 degrees/s respectively when the system is reciprocal and nonreciprocal. The suppression effects of the back-reflection noise in the resonant micro-optical gyroscope with different modulation techniques are compared. The separation modulation technique can suppress the intensity item of the back-reflection noise when using different modulation frequency and the interference item of the back-reflection noise can be suppressed below the shot-noise limited sensitivity when the carrier suppression reaches 120 dB which is achievable using four phase modulators. The reciprocal modulation technique can improve the reciprocity of the resonant micro-optical gyroscope and can suppress the residual intensity modulation noise of the phase modulator and the frequency noise of the laser effectively. When using the reciprocal modulation technique, the interference item of the backreflection noise can be suppressed by carrier suppression but the intensity item of the back-reflection noise can not be suppressed which brings the noise of the magnitude of 10 degrees/ s according to the simulation result. So it is necessary to add the optical switch or the pulse modulator in the resonant micro-optical gyroscope system to suppress the intensity item when using the reciprocal modulation technique. The optical switch or the pulse modulator can separate the clockwise and the counter clockwise lightwave in time and avoid the energy coupling between the signal light and the back-reflection light which is equivalent to reducing the back-reflection coefficient. In theory, the intensity item and the interference item of the back-reflection noise can be suppressed totally but the suppression effect is limited by the channel crosstalk of the optical switch or the pulse modulator. According to the simulation result,the intensity item of the back-reflection noise can be suppressed below the shot-noise limited sensitivity when the crosstalk of the optical switch or the pulse modulator is 45 dB. To suppress the interference item of the back-reflection noise below the shotnoise limited sensitivity the crosstalk of the optical switch or the pulse modulator should be better than 115 dB which is difficult to achieve. The above analyses provide the theoretical basis for the establishment of the resonant micro-optical gyroscope system. The resonant micro-optical gyroscopes using the separation modulation technique and the reciprocal modulation technique are established,respectively. The outputs of the two system are tested in 1 800 s. The test results show that the gyro output is stable under the separation modulation system because the intensity item and the interference item of the back-reflection noise are both suppressed. The noise of the magnitude of 10 degrees/s is introduced in the system using the reciprocal modulation technique because the intensity item of the back-reflection noise is not suppressed which is coincident with the simulation result.

Analysis of Coupled Resonator Optical Waveguide Gyroscope Based on Periodically Modulated Coupling and Circumferences

A Hollow-Core Photonic-Crystal Fiber-Optic Gyroscope Based on a Parallel Double-Ring Resonator.

Performance Analysis of an Optical Passive Ring-Resonator Gyro with A Hollow-Core Photonic Bandgap Fiber Sensing Coil

Optimization of Reciprocal Modulation Parameters in Resonant Fiber Optic Gyro

Microring resonator optical waveguide gyroscope based on coupling coefficient and coupling area modulating

Analysis on Phase Modulation Spectroscopy of Resonator Fiber Optic Gyro

Effects of Structural Dimension Variation on the Vibration of MEMS Ring-Based Gyroscopes

Resonant Fiber Optic Gyro Based on A Sinusoidal Wave Modulation and Square Wave Demodulation Technique

Broadband Source-Driven Resonant Micro-Optic Gyroscope Based on a Multi-Turn Waveguide-Type Ring Resonator

Improving the Performance of Broadband Source-Driven Resonant Fiber-Optic Gyroscopes

Double Closed-Loop Resonant Micro Optic Gyro Using Hybrid Digital Phase Modulation.

Synchronous In-Phase and Quadrature Demodulation Technique for Resonant Micro-Optic Gyroscope.

Full investigation of the backscattering in resonator fiber optic gyro

Investigation and analysis of a MOEMS gyroscope based on novel resonator

Back-reflection Noise Analysis of the Resonant Micro-optical Gyroscope with Different Modulation Techniques

Resonator Fiber Optic Gyro Using the Triangle Wave Phase Modulation Technique

Analysis of the Mechanical Coupling Characteristics of a Monolithic Tri-Axis MEMS Gyroscope

Performance Improvement of a Resonant Fiber Optic Gyroscope with a Hybrid Photonic Crystal Fiber Ring Resonator.

Resonant Micro Optic Gyroscope Equipped with Multi-Turn Waveguide Ring Resonator

Optimal Design of Ring Resonator in Silica Optical Waveguide

Design, Fabrication, and Characterization of a Multicurved Surface Fusion Metal Resonant Gyroscope