Abstract:Abstract The main aim of this study is to develop a mathematical size-dependent vehicle cabin model for particulate matter concentration including PM 2.5 (particles of aerodynamic diameter less than 2.5 μm) and UFPs (ultrafine particles of aerodynamic diameter less than 100 nm), as well as CO 2 concentration. The ventilation airflow rate and cabin volume parameters are defined from a previously developed vehicle model for climate system design. The model simulates different filter statuses, application of pre-ionization, different airflow rates and recirculation degrees. Both particle mass and count concentration within 10–2530 nm are simulated. Parameters in the model are defined from either available component test data (for example filter efficiencies) or assumptions from corresponding studies (for example particle infiltration and deposition rates). To validate the model, road measurements of particle and CO 2 concentrations outside two vehicles were used as model inputs. The simulated inside PM 2.5 , UFP and CO 2 concentration were compared with the inside measurements. Generally, the simulation agrees well with measured data (Person’s r 0.89–0.92), and the simulation of aged filter with ionization is showing higher deviation than others. The simulation using medium airflows agrees better than the simulation using other airflows, both lower and higher. The reason for this may be that the filter efficiency data used in the model were obtained at airflows close to the medium airflow. When all size bins are compared, the sizes of 100–300 nm were slightly overestimated. The results indicated that among others, expanded filter efficiency data as a function of filter ageing and airflow rate would possibly enhance the simulation accuracy. An initial application sample study on recirculation degrees presents the model’s possible application in developing advanced climate control strategies.

Predicting Airflow Distribution and Contaminant Transport in Aircraft Cabins with A Simplified Gasper Model

Investigating the impact of gaspers on cabin air quality in commercial airliners with a hybrid turbulence model

Assessment of Turbulence Models and Air Supply Opening Models for CFD Modelling of Airflow and Gaseous Contaminant Distributions in Aircraft Cabins

Numerical Investigation of Gasper Air Jet Dynamics in an Aircraft Cabin

Influencing factors in the simulation of airflow and particle transportation in aircraft cabins by CFD

Experimental investigation of air distribution in an airliner cabin mockup with displacement ventilation

A Simplified Method for Assessing Particle Deposition Rate in Aircraft Cabins

A model to evaluate ozone distribution and reaction byproducts in aircraft cabin environments

Optimizing cabin air inlet velocities and personal risk assessment: Introducing the Personal Contamination Ratio (PCR) method for enhanced aircraft cabin infection risk evaluation

Test Rig Design Considerations to Detect Volatile Organic Compounds in Aircraft Cabins

Numerical investigation of pilots’ micro-environment in an airliner cockpit

Numerical Simulations of the Instantaneous Flow Fields in a Generic Aircraft Cabin with Various Categories Turbulence Models

Cfd Simulation And Validation For Mixing Ventilation Scaled-Down Empty Aircraft Cabin Using Openfoam

Study of the automotive aerodynamic performance affected by entrance structure of forecabin

Numerical Simulations of Interpersol Aerosol Transport in a Single-Aisle Aircraft Cabin

A CFD-Based Design of S-Shaped Nozzle Attachment for Aircraft Cabin Gaspers

On the effectiveness of Reynolds-averaged and subgrid scale models in predicting flows inside car cabins

Size-resolved simulation of particulate matters and CO2 concentration in passenger vehicle cabins

Study on the carbon dioxide lockup phenomenon in aircraft cabin by computational fluid dynamics

Prediction of particle deposition around the cabin air supply nozzles of commercial airplanes using measured in-cabin particle emission rates

Experimental investigation of large-scale flow structures in an aircraft cabin mock-up