Abstract:Free volume is one of the key structural concepts widely used to describe various glass phenomena. However, free volume is challenging to be rigorously defined in glass structures and directly determined by experiments. Here, we employed metallic glass as a simple glass model system and studied the structural evolution of an as-spun (hyperquenched) and another thermally annealed metallic glass with different amounts of free volume by in situ high-pressure synchrotron x-ray diffraction. Therefore, the effect of free volume on the compression behavior of metallic glasses can be clarified by comparing the two samples at identical experimental conditions. We find that a higher amount of free volume causes both lower density and bulk modulus as expected at ambient conditions. Surprisingly, during compression, the decrease of free volume has a constant rate up to ∼30GPa and appears to be mostly reversible upon decompression without obvious permanent densification after pressure release. These results suggest an elastic process in metallic glasses under pressure. Implications of these results for the structural models based on the free-volume concept are discussed. The typically assumed glass structural model with isolated domains of “liquidlike” (free-volume rich) region embedded in a solidlike (free-volume poor) matrix seems unlikely. Instead, a more “homogeneous” model over a wide range of length scales such as a nested fractal network of liquid- and solidlike regions seems more consistent with the experimental observation.

Mechanical Behavior of Bulk Metallic Glass Prepared by Copper Mold Casting with Reversed Pressure

Intrinsic Versus Extrinsic Effects on Serrated Flow of Bulk Metallic Glasses

Achieving Large Macroscopic Compressive Plastic Deformation and Work-Hardening-Like Behavior in A Monolithic Bulk Metallic Glass by Tailoring Stress Distribution

Elastic properties of Cu60Zr20Hf10Ti10 bulk metallic glass under high pressure

New Class of Plastic Bulk Metallic Glass.

Synthesis of Bulk Zr48Cu36Al8Ag8 Metallic Glass by Hot Pressing of Amorphous Powders

Enhanced mechanical properties of Zr65Cu15Ni10Al10 bulk metallic glass by simultaneously introducing surface grooves and multiple shear bands

Mechanical Properties of Monolithic Zr62Al8Ni13Cu17 Bulk Metallic Glass

Enhanced Plasticity in Zr–Cu–Ag–Al–Be Bulk Metallic Glasses

Preparation of Carbon-nanotube Reinforced Mg Based Bulk Metallic Glass Composites and Its Mechanical Properties

Rejuvenation-to-Relaxation Transition Induced by Elastostatic Compression and Its Effect on Deformation Behavior in a Zr-Based Bulk Metallic Glass

Mechanical Behavior of Carbon Nanotube-Reinforced Mg–Cu–Gd–Ag Bulk Metallic Glasses

Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites

Enhancing strength and plasticity of Zr-based bulk metallic glasses by Zr partially substituted Fe and isothermal annealing

Substantially enhanced plasticity of bulk metallic glasses by densifying local atomic packing

Structural Evolution in Bulk Metallic Glass under High-Temperature Tension

Effect of chemical composition on the fracture toughness of bulk metallic glasses

Free-volume-induced Enhancement of Plasticity in a Monolithic Bulk Metallic Glass at Room Temperature

Mechanical Properties,Damage and Fracture Mechanisms of Bulk Metallic Glass Materials

Reversible linear-compression behavior of free volume in a metallic glass

Effect of powder size on strength and corrosion behavior of Mg66Zn30Ca4 bulk metallic glass