Abstract:Perovskite solar cell, which is prepared by using the organic-inorganic hybrid halide CH3NH3PbX3 (X = I, Cl and Br), receives widespread attention because of its solution processability and high photon-to-electron conversion efficiency. The highest reported photon-to-electron conversion efficiency is that using CH3NH3PbI(3-x)Clx as an absorber. It is reported that the diffusion length is greater than 1 micrometer in this mixed halide perovskite. The method most commonly used in preparing CH3NH3PbI(3-x)Clx film is the one-step pyrolysis method, which has a complex reaction mechanism. In this paper, we review the work about CH3NH3PbI(3-x)Clx perovskite, in which emphasis is put on the importance of the preparation process, and analyze the role of CH3NH3I in the one-step pyrolysis method for fabricating the CH3NH3PbI(3-x)Clx perovskite layer. Scanning electron microscope images show that CH3NH3I can improve the coverage and crystallinity of the perovskite layer for precursors in low CH3NH3I concentrations (CH3NH3I/PbCl2 = 2.0 and 2.5). For precursors in high CH3NH3I concentrations (CH3NH3I/PbCl2 = 2.75 and 3), this change is not obvious. X-ray photoelectron spectroscopy confirms the change of coverage, and indicates that the content of Cl in CH3NH3PbI(3-x)Clx will be less than 5% for precursors with high CH 3 NH 3 I concentrations (CH3NH3I/PbCl2 > 2.5). Perovskite solar cells based on CH3NH3PbI(3-x)Clx with different Cl dopant concentrations are studied by photoelectric measurements. Photocurrent density-photovoltage curves show that the performance of the devices increases with the increase of CH3NH3I concentration in precursors. And the incident-photon-to-current conversion efficiency (IPCE) measurements indicate that the devices fabricated by using precursors with high CH3NH3I concentration have a relatively high external quantum efficiency. These results imply that only CH3NH3PbI(3-x)Clx with very low Cl dopant concentration will be effective material for photovoltaic application. To further understand the difference between these devices during working condition, transient photovoltage/ photocurrent measurements are carried out to investigate the carrier dynamics in the device. Transient photovoltage decay curves indicate that high Cl dopant concentration may decrease the photoelectron lifetime in CH3NH3PbI(3-x)Clx, and results in a relative low open-circuit photovoltage in the corresponding photovoltaic devices. The charge transport time in the devices of various Cl concentrations are studied by transient photocurrent decay method. CH3NH3PbI(3-x)Clx with low Cl dopant concentration has relative short transport time, which can avoid the recombination process and increase the charge collection efficiency.

Observation Of Lower Defect Density In Ch3nh3pb(I,Cl)(3) Solar Cells By Admittance Spectroscopy

Effects of Ch3nh3i on Fabricating Ch3nh3pbi(3-X)Clx Perovskite Solar Cells

Synergetic Effect of Chloride Doping and Ch3nh3pbcl3 on Ch3nh3pbi3-Xclx Perovskite-Based Solar Cells

Chloride Incorporation Process in CH₃NH₃PbI(3-x)Cl(x) Perovskites Via Nanoscale Bandgap Maps.

Diagnosis of Electrically Active Defects in CH3NH3PbI3 Perovskite Solar Cells Via Admittance Spectroscopy Measurements.

CH3NH3PbIxCl(3−x) Thin Film Prepared by Vapor Transfer Method for Perovskite Solar Cells

Fast Diffusion of Native Defects and Impurities in Perovskite Solar Cell Material CH3NH3PbI3

Effect on the Morphology and Optical Properties of Ch3nh3pbi3 with Additive of Nh4cl

Elucidating the charge carrier separation and working mechanism of CH3NH3PbI3−xClx perovskite solar cells

Enhanced Performance of CH3NH3PbI3−x Cl X Perovskite Solar Cells by CH3NH3I Modification of TiO2-perovskite Layer Interface

Tuning Superior Solar Cell Performance of Carrier Mobility and Absorption in Perovskite CH 3 NH 3 GeCl 3 : A Density Functional Calculations

CH3NH3PbI3 and CH3NH3PbI3–xClx in Planar or Mesoporous Perovskite Solar Cells: Comprehensive Insight into the Dependence of Performance on Architecture

DFT analysis and FDTD simulation of CH3NH3PbI3-xClx mixed halide perovskite solar cells: role of halide mixing and light trapping technique

Unraveling Its Intrinsic Role of CH<sub>3</sub>NH<sub>3</sub>Cl Doping for Efficient Enhancement of Perovskite Solar Cells from Fine Insight by Ultrafast Charge-Transfer Dynamics

Electron transport layer-free planar perovskite solar cells: Further performance enhancement perspective from device simulation

Device Simulation of Inverted CH3NH3PbI3−xClx Perovskite Solar Cells Based on PCBM Electron Transport Layer and NiO Hole Transport Layer

NdCl 3 Dose as a Universal Approach for High-Efficiency Perovskite Solar Cells Based on Low-Temperature-Processed SnO x

The optoelectronic role of chlorine in CH3NH3PbI3(Cl)-based perovskite solar cells

Investigation of Physico-Chemical Properties of CH3NH3PbI3 and CH3NH3PbI3–xClx Hybrid Perovskites Thin Films for Photovoltaic and Optoelectronic Applications: A Comparative Study

NdCl3 Dose As a Universal Approach for High-Efficiency Perovskite Solar Cells Based on Low-Temperature-Processed SnOx.

Effective Masses and Electronic and Optical Properties of Nontoxic Masnx(3) (X = Cl, Br, and I) Perovskite Structures As Solar Cell Absorber: A Theoretical Study Using Hse06