Abstract:All‐solution process technique is used to fabricate an ultraviolet photodetector based on the van der Waals Schottky junction. The work function of Ti3C2Tx MXene is adjusted by the use of an Au electrode. The device with modulated photovoltaic‐pyroelectric effect and hole‐trapping mechanism under the reverse bias voltage obtains ultrahigh responsivity and specific detectivity together with a short response time. Two‐dimensional transition metal carbides and nitrides (MXenes) show tremendous potential for optoelectronic devices due to their excellent electronic properties. Here, a high‐performance ultraviolet photodetector based on TiO2 nanorod arrays/Ti3C2Tx MXene van der Waals (vdW) Schottky junction by all‐solution process technique is reported. The Ti3C2Tx MXene modulated by the Au electrode increases its work function from 4.41 to 5.14 eV to form a hole transport layer. Complemented by the dangling bond‐free surface of Ti3C2Tx, the Fermi‐level pinning effect is suppressed and the electric‐field strength of the Schottky junction is enhanced, which promotes charge separation and transport. After applying a bias of −1.5 V, the photovoltaic effect is favorably reinforced, while the hole‐trapping mechanism (between TiO2 and oxygen) and reverse pyroelectric effect are largely eliminated. As a result, the responsivity and specific detectivity of the device with FTO/TiO2 nanorod arrays/Ti3C2Tx/Au structure reach 1.95 × 105 mA W−1 and 4.3 × 1013 cm Hz1/2 W−1 (370 nm, 65 mW cm−2), respectively. This work provides an effective approach to enhance the performance of photodetectors by forming the vdW Schottky junction and choosing metal electrodes to modulate MXene as a suitable charge transport layer.

High Performance Flexible Ultraviolet Photodetectors Based on Tio2/Graphene Hybrid for Irradiation Monitoring Applications

High performance flexbile ultraviolet photodetectors based on TIO2/Graphene hybrid

High Performance Flexible Ultraviolet Photodetectors Based On Tio(2)/Graphene Hybrid

High‐Performance Ultraviolet Photodetectors Enabled by van der Waals Schottky Junction Based on TiO2 Nanorod Arrays/Au‐Modulated Ti3C2Tx MXene

High sensitivity UV photodetectors based on low-cost TiO2P25-graphene hybrids

High Sensitivity Ultraviolet Detection Based on Three-Dimensional Graphene Field Effect Transistors Decorated with TiO2 NPs

High sensitivity ultraviolet detection based on three-dimensional graphene field effect transistors decorated with TiO 2 NPs

High performance self-powered UV–visible photodetectors based on TiO2/graphene/ZnIn2S4/electrolyte heterojunctions

Solar-blind Ultraviolet Detection Based on TiO2 Nanoparticles Decorated Graphene Field-Effect Transistors

Sensitive and Robust Ultraviolet Photodetector Array Based on Self-Assembled Graphene/C60 Hybrid Films.

High‐Responsivity Graphene/4H‐SiC Ultraviolet Photodetector Based on a Planar Junction Formed by the Dual Modulation of Electric and Light Fields

A self-powered high-performance graphene/silicon ultraviolet photodetector with ultra-shallow junction: breaking the limit of silicon?

Graphene-Ta2O5 heterostructure enabled high performance, deep-ultraviolet to mid-infrared photodetection

Graphene-carbon Nanotube Hybrid Films for High-Performance Flexible Photodetectors

Hybrid Graphene/cadmium-Free ZnSe/ZnS Quantum Dots Phototransistors for UV Detection.

Self-Powered Flexible TiO<sub>2</sub> Fibrous Photodetectors: Heterojunction with P3HT and Boosted Responsivity and Selectivity by Au Nanoparticles

High-performance, flexible graphene/ultra-thin silicon ultra-violet image sensor

Highly-Responsive Broadband Photodetector Based on Graphene-PTAA-SnS2 Hybrid

A transparent, self-powered photodetector based on p-CuI/n-TiO 2 heterojunction film with high on–off ratio

A High‐Performance Flexible Broadband Photodetector Based on Graphene–PTAA–Perovskite Heterojunctions

A high-performance TiO2 nanowire UV detector assembled by electrospinning