Abstract:The surfaces of nanoscale zerovalent iron (NZVI) used for groundwater remediation must be modified to be mobile in the subsurface for emplacement. Adsorbed polymers and surfactants can electrostatically, sterically, or electrosterically stabilize nanoparticle suspensions in water, but their efficacy will depend on groundwater ionic strength and cation type as well as physical and chemical heterogeneities of the aquifer material. Here, the effect of ionic strength and cation type on the mobility of bare, polymer-, and surfactant-modified NZVI is evaluated in water-saturated sand columns at low particle concentrations where filtration theory is applicable. NZVI surface modifiers include a high molecular weight (MW) (125 kg/mol) poly(methacrylic acid)-b-(methyl methacrylate)-b-(styrene sulfonate) triblock copolymer (PMAA-PMMA-PSS), polyaspartate which is a low MW (2-3 kg/mol) biopolymer, and the surfactant sodium dodecyl benzene sulfonate (SDBS, MW = 348.5 g/mol). Bare NZVI with an apparent zeta-potential of -30 +/- 3 mV was immobile. Polyaspartate-modified nanoiron (MRNIP) with an apparent zeta-potential of -39 +/- 1 mV was mobile at low ionic strengths (< 40 mM for Na+ and < 0.5 mM for Ca2+), and had a critical deposition concentration (CDC) of approximately 770 mM Na+ and approximately 4 mM for Ca2+. SDBS-modified NZVI with a similar apparent zeta-potential (-38.3 +/- 0.9 mV) showed similar behavior (CDC approximately 350 mM for Na+ and approximately 3.5 mM for Ca2+). Triblock copolymer-modified NZVI had the highest apparent zeta-potential (-50 +/- 1.2 mV), the greatest mobility in porous media, and a CDC of approximately 4 M for Na+ and approximately 100s of mM for Ca2+. The high mobility and CDC is attributed to the electrosteric stabilization afforded by the triblock copolymer but not the other modifiers which provide primarily electrostatic stabilization. Thus, electrosteric stabilization provides the best resistance to changing electrolyte conditions likely to be encountered in real groundwater aquifers, and may provide transport distances of 10s to 100s of meters in unconsolidated sandy aquifers at injection velocities used for emplacement.

The Influence of Polyelectrolyte Modification on Nanoscale Zero-Valent Iron (nzvi): Aggregation, Sedimentation, and Reactivity with Ni(II) in Water

Enhanced aggregation and sedimentation of nanoscale zero-valent iron (nZVI) with polyacrylamide modification

Nanoscale Zero-Valent Iron Modified by Bentonite with Enhanced Cr(VI) Removal Efficiency, Improved Mobility, and Reduced Toxicity

Extension of X-parameters to include long-term dynamic memory effects

Modification, characterization and investigations of key factors controlling the transport of modified nano zero-valent iron (nZVI) in porous media

Modification of Zero Valent Iron Nanoparticles by Sodium Alginate and Bentonite: Enhanced Transport, Effective Hexavalent Chromium Removal and Reduced Bacterial Toxicity

Enhanced Separation of Nanoscale Zero-Valent Iron (nzvi) Using Polyacrylamide: Performance, Characterization and Implication

Mechanochemical Synthesis of Nitrogen-Modified Microscale Zero-Valent Iron for Efficient Cr(VI) Removal: the Role of Lattice Strain

Influence of aggregation and sedimentation behavior of bare and modified zero-valent-iron nanoparticles on the Cr(VI) removal under various groundwater chemistry conditions

Transformation of iron oxides in amorphous nanoscale zero-valent iron (A-nZVI) and nZVI: effect on Sb(iii) removal affinity and stability

Nanoscale Zero-Valent Iron Dispersed by Sodium Alginate Enables Highly Efficient Removal of Lead (Pb) from Aqueous Solution

Influence of natural organic matter on nanoscale zero-valent iron for contaminants removal in water: A critical review

Ionic strength and composition affect the mobility of surface-modified Fe0 nanoparticles in water-saturated sand columns

Effects of environmental factors on the removal of heavy metals by sulfide-modified nanoscale zerovalent iron

Remarkable promotion in particle dispersion and electron transfer capacity of sulfidated nano zerovalent iron by coating alginate polymer

Nitrate reduction using nanosized zero-valent iron supported by polystyrene resins: Role of surface functional groups

Impact of Phosphate Adsorption on the Mobility of PANI‐supported Nano Zero‐valent Iron

Reciprocal Interference of Clay Minerals and Nanoparticulate Zero-Valent Iron on Their Interfacial Interaction with Dissolved Organic Matter

[Medical treatment of ectopic pregnancy: a randomized clinical trial comparing metotrexate-mifepristone and methotrexate-placebo].

Dual-supported nanoscale zero-valent iron for As(III) contaminated groundwater remediation

Computational study and optimization experiment of nZVI modified by anionic and cationic polymer for Cr(VI) stabilization in soil: Kinetics and response surface methodology (RSM)