Abstract:In recent years, wearable electronic devices have attracted significant research interest. With the rapid development of the new generation of electronic devices, high-performance flexible transparent electrode is desired to realize high- efficient and high-performance optoelectronic devices. A flexible transparent electrode is a kind of conductive film which has ultra-high conductivity and transmittance. In addition to these two important features, a new generation of flexible transparent electrodes must exhibit good mechanical flexibility. They have various applications such as flexible solar cells, smart glasses, flexible sensors,tactile electronic skin, and flexible displays,which changes and improves our daily life. The most widely used transparent electrode material is Indium Tin Oxide (ITO), which has high transmittance(> 90%) under low sheet resistance(10 Omega/ sq). However,ITO has many disadvantages, such as poor adhesion to substrate, inherent brittleness and high price, which is not suitable to fully meet the requirements of flexible electronic devices. Researchers have explored some new transparent electrode materials to replace the traditional ITO electrodes, such as conductive polymers, graphene, carbon nanotubes, metal grids, metal nanowires, and so on. Among them,silver nanowires are regarded as the most promising conductive materials due to their excellent optoelectronic properties and mechanical flexibility. However, the silver nanowires network has a high contact resistance due to the weak contact at the junctions,which causes poor conductivity and weak contact. Mechanical stability and the electrical conductivity can be improved by melting and welding the silver nanowire network. The traditional thermal annealing welding process is time-consuming,and the required high temperature(above 200 degrees C)can easily destroy the silver nanowires and flexible substrate. In this paper,a new method was developed to achieve high-efficient welding of silver nanowire networks at low temperatures using the optical nano-welding process. Silver nanowires/PMMA/ PDMS flexible transparent electrodes were fabricated combined with the femtosecond laser nano-welding process. Numerical simulations of the interaction between different silver nanowire crossing angles at different laser wavelengths were performed, and the optimal conditions for laser welding and silver nanowire solutions were explored. The results showed that the silver nanowires network structure has strong absorption in the laser wavelength range of 500 similar to 600 nm. The effects of laser wavelength, laser energy and irradiation time on the sheet resistance of the film were studied. The results showed that when the laser power used was 160 mW, the sheet resistance of the thin film can reach the lowest value at a shorter irradiation time(25 s). In addition,from the microscopic morphology of the silver nanowire junction, only the junctions of silver nanowires were melted and welded during the laser irradiation, while the remaining structure was not affected or even damaged including the flexible substrate. The highest figure of merit was also obtained when optimizing the deposition density of silver nanowires. When the deposition density of silver nanowires was 167.85 mg/cm(2), the optimal sheet resistance value of the flexible transparent electrode was 12.72 Omega/ sq, with a transmittance of 82.41% at 550 nm wavelength, demonstrating excellent optoelectronic properties. The proposed flexible transparent electrode also showed good mechanical stability, and the sheet resistance of the silver nanowire flexible transparent electrode remained relatively stable over 220 bending cycles and 70 adhesion tests. This remarkable feature paves the way for a new generation of flexible wearable electronics in the future.

Roll-to-Roll Encapsulation of Metal Nanowires Between Graphene and Plastic Substrate for High-Performance Flexible Transparent Electrodes

Roll‐to‐Roll Green Transfer of CVD Graphene Onto Plastic for a Transparent and Flexible Triboelectric Nanogenerator

A Transparent Electrode Based on a Metal Nanotrough Network.

Continuous Fabrication of Highly Conductive and Transparent Ag Mesh Electrodes for Flexible Electronics

Roll-to-roll Production of 30-Inch Graphene Films for Transparent Electrodes

Superstable Copper Nanowire Network Electrodes by Single-Crystal Graphene Covering and Their Applications in Flexible Nanogenerator and Light-Emitting Diode

A Stretchable, Transparent, and Mechanically Robust Silver Nanowire–Polydimethylsiloxane Electrode for Electrochromic Devices

Conductive Nanofiber Web Film with Polydimethylsiloxane Sidewalls Selectively Coated through a Plasma Process for High Performance Flexible Transparent Electrodes

Flexible Transparent Electrodes Based on Silver Nanowires: Material Synthesis, Fabrication, Performance, and Applications

Micro-nano Dual-Scale Embedded Graphene/ag Architectures for Flexible Low-Voltage-driven Transparent Electrothermal Films

Fabrication of Flexible Transparent Conductive Films via an Energy-Efficient In Situ Chemical Welding and Reinforcement Strategy

30 inch Roll-Based Production of High-Quality Graphene Films for Flexible Transparent Electrodes

High Performance Silver Nanowire based Transparent Electrodes Reinforced by EVA Resin Adhesive

High-Performance Flexible Transparent Electrode with an Embedded Metal Mesh Fabricated by Cost-Effective Solution Process.

Large-Area And Uniform Silver Nanowires Based Transparent Electrodes On Rigid And Flexible Substrates Fabricated By Polymethylmethacrylate-Assisted Spin-Coating

Scalable coating and properties of transparent, flexible, silver nanowire electrodes

A Deformable and Highly Robust Ethyl Cellulose Transparent Conductor with a Scalable Silver Nanowires Bundle Micromesh.

Flexible Transparent Electrodes Based on Silver Nanowires Synthesized Via a Simple Method.

1D Silver Nanowires/2D Graphene Composite Flexible Transparent Electrodes Induced by Superwetting Transfer

Highly Stretchable and Transparent Nanomesh Electrodes Made by Grain Boundary Lithography.

Fabrication and Study of Flexible Visibly Transparent Electrodes Using Silver Nanowires (Invited)