Abstract:In the calibration process of urban flood and non-point source pollution models, sensitive parameters and their changing trends cannot be quickly obtained. In this study, we accurately identify the effects of hydrological and water quality parameters in the SWMM model on runoff water quantity and water quality indicators under different return periods based on the improved Morris screening method, obtain the parameter sensitivities under different objective functions. Meanwhile, the intrinsic influence mechanism of the sensitive parameters on runoff water quantity and pollution load indicators in each return period is explored, and the integrated response law of flow-concentration-load rate process to the sensitive parameters is comparatively analyzed. The results showed that sensitivity of Destore-Imperv to the peak flow at the outfall, total outfall volume, flow peak occurrence time, and pollutant load is the greatest. Under the low return period, the change of Destore-Imperv resulted in sharp fluctuations in the load rate at T = 57 min in the mid-rainfall period, with a rate of variation of 37.74 %. While Decay Constant has the most significant effect on the load rate at T = 77 min in the mid-late rainfall period, with a rate of variation of 35.14 %. As the return period increases, the sensitivity of all hydrological and hydraulic parameters decreases except for Conduit Roughness. Wash-off exponent(C 2 ) of the road was the strongest sensitivity to pollutant loads and peak concentrations, followed by C 2 of the roof and Max.Buildup of the road, respectively. When C 2 = 1.03, the peak concentration trend produces a demarcation, the smaller C 2 is, the more forward the pollutant concentration wave peak is, and the more pronounced the peak pollutant concentration is in the initial rain, and vice versa, the more backward the pollutant concentration wave peak was, the initial concentration was extremely low while the later concentration surged. As the return period increased, the pollutant concentration wave peaks of the same C 2 were more forward, and the loading rate and concentration process trends were similar. The results of the study not only provide a reference for modeling calibration to determine the optimal parameter combinations, but also assist in finding solutions that can satisfy the regulation of urban runoff and non-point source pollution.

Modeling the Quality and Quantity of Runoff in a Highly Urbanized Catchment Using Storm Water Management Model

Sensitivity Analysis of Parameters of Storm Water Management Model with Sobol Method

Particle Size Effect in Urban Road-Deposited Sediment Wash-Off Process: Physical Experiments and Cellular Automata-Based Modeling

Urban Flood Risk Assessment Using Storm Characteristic Parameters Sensitive to Catchment-Specific Drainage System

Urban Pluvial Flood Modeling by Coupling Raster-Based Two-Dimensional Hydrodynamic Model and SWMM

Local Sensitivity Analysis for Pollution Simulation of Urban Rainfall-Runoff

Urban stormwater forecasting model and drainage optimization based on water environmental capacity

Parameter Identification and Validation of SWMM in Simulation of Impervious Urban Land Surface Runoff

Impact of Catchment and Rainfall Characteristics on Urban Runoff Quality

Coupling a Distributed Time Variant Gain Model into a Storm Water Management Model to Simulate Runoffs in a Sponge City

Modeling of Storm Runoff and Pollutant Wash off Processes During Storm Event in Rapidly Urbanizing Catchment

Urban Nonpoint Source Pollution Buildup and Washoff Models for Simulating Storm Runoff Quality in the Los Angeles County.

Influence of rainfall and catchment characteristics on urban stormwater quality.

A Modeling Method to Evaluate the Management Strategy of Urban Storm Runoff

Simulations of low impact development designs using the storm water management model

Analysis of pollutant dispersion patterns in rivers under different rainfall based on an integrated water-land model

Sensitivity identification of SWMM parameters and response patterns of runoff pollution on hydrological and water quality parameters

Urban Stormwater and Sewerage Modelling: An Approach for Peak Runoff and Volume Assessment

Monitoring and Simulation of Urban Hydrological Unit: A Case Study of Tsinghua University, Beijing

Land cover based simulation of urban stormwater runoff and pollutant loading

Urban Flood Modeling and Risk Assessment with Limited Observation Data: The Beijing Future Science City of China