Co2-In-Peg Emulsion-Templating Synthesis of Poly(Acrylamide) with Controllable Porosity and Their Use As Efficient Catalyst Supports

Zhimin Xue,Weihong Chang,Yan Cheng,Jing Liu,Jian Li,Wancheng Zhao,Tiancheng Mu

DOI: https://doi.org/10.1039/c6ra04897h

IF: 4.036

2016-01-01

RSC Advances

Abstract:Porous poly(acrylamide)s nanoparticles prepared from CO2-in-PEG emulsions have high catalytic activity for benzene hydrogenation reaction.

What problem does this paper attempt to address?

Advanced Catalyst Technology for Broad/Bimodal Polyethylene, Achieved by Polymer-Coated Particles Supporting Hybrid Catalyst

Binbo Jiang,Yong Yang,Lijun Du,Jingdai Wang,Yongrong Yang,Siegfried Stapf

DOI: https://doi.org/10.1021/ie301971k

2013-01-01

Industrial & Engineering Chemistry Research

Abstract:Polymer-coated particles were used to develop a novel catalyst technology for the production of broad/bimodal polyethylene in a single reactor. The methods for broad/bimodal polyethylene by catalyst technology, such as hybrid catalyst, composite support, and diffusion control, were combined together in this catalyst technology. An improved phase inversion method was used to fabricate poly[styrene-co-(acrylic acid)] (PSA) coated silica particles (SiO2/PSA). Core shell structure was obviously observed in the resulting SiO2/PSA. SiO2/PSA showed a significant barrier effect to the diffusion of 1-hexene and hexane but but no barrier effect to the diffusion of ethylene. This means the PSA layer has a selective barrier effect to the diffusion of small molecules. PSA-coated silica particles were used to support (n-BuCp)(2)ZrCl2/TiCl4, TiCl3/TiCl4, and Cp2ZrCl2/Fe based hybrid catalysts. The ethylene polymerization results indicated that the two different active sites can perform independently, and broad/bimodal polyethylene was obtained by all hybrid catalysts. The polydispersity index of the resulting polyethylene was as high as 18.13, even 44.5. The style of the activity profile was determined by whether the active sites in the core needed a cocatalyst or not.
An Improved Phase-Inversion Process for the Preparation of Silica/Poly[Styrene-Co-(Acrylic Acid)] Core-Shell Microspheres: Synthesis and Application in the Field of Polyolefin Catalysis

Du Lijun,Qin Wei,Wang Jingdai,Yang Yongrong,Wu Wenqing,Jiang Binbo

DOI: https://doi.org/10.1002/pi.2984

IF: 3.213

2010-01-01

Polymer International

Abstract:Spherical and well-dispersed silica/poly[styrene-co-(acrylic acid)] (SiO2/PSA) core-shell particles have been synthesized using an improved phase-inversion process. The resulting particles were successfully used as supports for polyolefin catalysts in the production of polyethylene with broadmolecular weight distribution. Through the vapor phase, instead of the liquid phase in the traditional process, a non-solvent was introduced into a mixture of micrometer-sized SiO2 and PSA solution. The core-shell structure of the resulting SiO2/PSA microspheres was confirmed using optical microscopy, scanning electron microscopy, Fourier transfer infrared spectrometry, thermogravimetric analysis and measurement of nitrogen adsorption/desorption isotherms. In order to avoid agglomeration of particles and to obtain a good dispersion of the SiO2/PSA core-shell microspheres, the non-solvent was added slowly. As the concentration of PSA solution increased, the surface morphology of the core-shell particles became looser and more irregular. However, the surface area and the pore volume remained the same under varying PSA concentrations. The SiO2/PSA core-shell microspheres obtained were used as a catalyst carrier system in which the core supported (n-BuCp)(2)ZrCl2 and the shell supported TiCl4. Ethylene/1-hexene copolymerization results indicated that the zirconocene and titanium-based Ziegler-Natta catalysts were compatible in the hybrid catalyst, showing high activities. The resulting polyethylene had high molecular weight and broadmolecular weight distribution. (C) 2010 Society of Chemical Industry
Preparation and Characterization of Novel Polyethylene Supported Metallocene Catalysts

Ning Zhu,Wenhua Sun,Zilong Li,ChangXing Shao,Youliang Hu,Jiasong He

DOI: https://doi.org/10.3321/j.issn:0251-0790.2001.z1.050

2001-01-01

Abstract:Different meshes powder of polyethylene grafting 4-vinylpyridine copolymers (PEVP) has been produced through the irradiation method. After pretreated with Methylaluminoxane (MAO), the copolymers were used as the supports for Cp2ZrCl2 catalyst. Results of XPS and FTIR measurements show that the catalytic sites have been bridged through MAO on the polyethylene cartier. The percentages of grafting 4-vinylpyridine and supported Cp2ZrCl2 depend on the size of polyethylene powder. The smaller the polyethylene powder, the more percent 4-vinylpyridine group and the Cp2ZrCl2 on the polyethylene chains, and the polyethylene- supported catalyst has a much higher activity for ethylene polymerization.
Structurally Designed Synthesis of Mechanically Stable Poly(benzoxazine-co-resol)-Based Porous Carbon Monoliths and Their Application As High-Performance CO2 Capture Sorbents

Guang-Ping Hao,Wen-Cui Li,Dan Qian,Guang-Hui Wang,Wei-Ping Zhang,Tao Zhang,Ai-Qin Wang,Ferdi Schueth,Hans-Josef Bongard,An-Hui Lu

DOI: https://doi.org/10.1021/ja203857g

IF: 15

2011-01-01

Journal of the American Chemical Society

Abstract:Porous carbon monoliths with defined multi-length scale pore structures, a nitrogen-containing framework, and high mechanical strength were synthesized through a self-assembly of poly(benzoxazine-co-resol) and a carbonization process. Importantly, this synthesis can be easily scaled up to prepare carbon monoliths with identical pore structures. By controlling the reaction conditions, porous carbon monoliths exhibit fully interconnected macroporosity and mesoporosity with cubic Im3m symmetry and can withstand a press pressure of up to 15.6 MPa. The use of amines in the synthesis results in a nitrogen-containing framework of the carbon monolith, as evidenced by the cross-polarization magic-angle-spinning NMR characterization. With such designed structures, the carbon monoliths show outstanding CO2 capture and separation capacities, high selectivity, and facile regeneration at room temperature. At similar to 1 bar, the equilibrium capacities of the monoliths are in the range of 3.3-4.9 mmol g(-1) at 0 degrees C and of 2.6-3.3 mmol g(-1) at 25 degrees C, while the dynamic capacities are in the range of 2.7-4.1 wt % at 25 degrees C using 14% (v/v) CO2 in N-2. The carbon monoliths exhibit high selectivity for the capture of CO2 over N-2 from a CO2/N-2 mixture, with a separation factor ranging from 13 to 28. Meanwhile, they undergo a facile CO2 release in an argon stream at 25 degrees C, indicating a good regeneration capacity.
Formulation of porous hetero-frameworks via incorporating poly(ionic liquid)s with porphyrin derivative-functionalized organosilicas for boosting in-situ CO2 capture and conversion

Ran Ping,Han Zhang,Shasha Wang,Fusheng Liu,Guojie Zhang,Dongchao Wang,Mengshuai Liu

DOI: https://doi.org/10.1016/j.cej.2023.147243

IF: 15.1

2023-12-01

Chemical Engineering Journal

Abstract:Chemical utilization of CO2 has garnered significant attention in response to the growing environmental and energy challenges. Novel porous hetero-frameworks, Zn-TPMO x @PIL-C n , are developed herein via in-situ polymerization of [VImC n ]Br (n = 2, 4, 6) onto porphyrin derivative-functionalized organosilicas (Zn-TPMO x , x = 10, 15, 20). The structures of Zn-TPMO x @PIL-C n are characterized and found to possess high specific surface area as well as multiple active sites including Lewis acid/base groups, dual hydrogen bond donors and nucleophilic groups. These hetero-frameworks are then utilized for the synthesis of cyclic carbonates through in-situ capture and conversion of CO2 from simulated flue gas. The catalytic performance of different Zn-TPMO x @PIL-C n and technological conditions are investigated, revealing that the optimal Zn-TPMO20@PIL-C6 catalyst achieves a 96 % yield of chloropropene carbonate with 99 % selectivity under reaction conditions of 110 °C, 1 MPa flue gas for 6 h. Through an assessment of the recyclability and versatility of Zn-TPMO20@PIL-C6 catalyst, it is observed that the robust Zn-TPMO20@PIL-C6 maintains its high activity even after five cycles. Furthermore, this catalyst exhibits satisfactory performance in promoting reactions between various epoxides and flue gas CO2. Based on the synergistic activation of multiple active sites, the cycloaddition mechanism between CO2 and epoxide under the catalysis of Zn-TPMO x @PIL-C n is proposed.

engineering, chemical, environmental
Amphiphilic Covalent Organic Framework Nanoparticles for Pickering Emulsion Catalysis with Size Selectivity

Houbing Zou,Qibiao Li,Rongyan Zhang,Zeshan Xiong,Binghua Li,Junhao Wang,Runwei Wang,Qianrong Fang,Hengquan Yang

DOI: https://doi.org/10.1002/anie.202314650

2024-02-02

Angewandte Chemie International Edition

Abstract:Exploiting advanced amphiphilic solid catalysts is crucial to the development of Pickering emulsion catalysis. Herein, covalent organic framework (COF) nanoparticles constructed using highly hydrophobic monomers as linkers were found to show superior amphiphilicity and they were then developed as a new class of solid surfactants for Pickering emulsion catalysis. Employing amphiphilic COFs as solid emulsifiers, Pickering emulsions with controllable emulsion type and droplet sizes were obtained. COF materials have also been demonstrated to serve as porous surface coatings to replace traditional surface modifications for stabilizing Pickering emulsions. After implanting Pd nanoparticles into amphiphilic COFs, the obtained catalyst displayed a 3.9 times higher catalytic efficiency than traditional amphiphilic solid catalysts with surface modifications in the biphasic oxidation reaction of alcohols. Such an enhanced activity was resulted from the high surface area and regular porous structure of COFs. More importantly, because of their tunable pore diameters, Pickering emulsion catalysis with remarkable size selectivity was achieved. This work is the first example that COFs were applied in Pickering emulsion catalysis, providing a platform for exploring new frontiers of Pickering emulsion catalysis.

chemistry, multidisciplinary
Construction of polymers with highly dispersed reactive phases and open pores for catalyzing the efficient synthesis of CO2 to α‐methylene cyclic carbonates

Xiaoxuan Guo,Zhixiu Yang,Fenglei Zhang,Lijing Gao,Ruiping Wei,Guomin Xiao

DOI: https://doi.org/10.1002/ajoc.202400087

IF: 3.116

2024-04-10

Asian Journal of Organic Chemistry

Abstract:Selective capture of carbon dioxide as a C1 feedstock for the preparation of high‐value chemicals has been recognised as an important way to mitigate the crisis. In this work, a new heterogeneous catalyst, Cu@CP‐PII, was developed through the rational construction of an open‐pore organic skeleton, which is easy to synthesise and highly efficient. With the synergistic effect between the high CO2 affinity of the porous skeleton and the highly dispersed Cu(I) sites of the activated alkynes, it can be used for the efficient preparation of α‐methylene cyclic carbonates at ambient temperature and pressure. The structure and morphology were exhaustively characterised by Solid State 13C‐NMR, FT‐IR, XPS, TEM and N2 adsorption‐desorption tests, and this catalyst possessed a high surface area of 273.7 m2⸳g‐1 and uniformly dispersion of CuI. To test its catalytic activity, Cu@CP‐PII in an amount of only 0.4 mol% was used as a catalyst for the carboxylative cyclization reaction of propargylic alcohols with CO2, which resulted in substrate conversions up to 100% and yields greater than 99%. In addition, controlled experiments and mechanistic elucidation confirmed that anhydrous and low temperatures are necessary to achieve high selective control of the target product α‐methylene cyclic carbonates.

chemistry, organic
Polymer-based solid acids with adjustable textural and hydrophobic properties for polyoxymethylene dimethyl ethers synthesis from formaldehyde and methanol

Xiaoping Wang,Jianhua Song,Lin Xu,Dianhua Liu

DOI: https://doi.org/10.1016/j.ces.2023.119316

IF: 4.7

2023-09-01

Chemical Engineering Science

Abstract:Cation exchange resins are widely utilized in polyoxymethylene dimethyl ethers (PODEn) synthesis due to considerable catalytic performance. However, low specific surface area and strong hydrophilicity hinder the generation of long-chain PODEn and industrial applications. Herein, polymer-based solid acids with adjustable textural and hydrophobic properties were prepared by hydrothermal method. Results indicated that the use of tetrahydrofuran and water as solvents in the preparation process resulted in a significant increase in the specific surface area and pore size distribution of the catalysts. Meanwhile, hydrophobic catalysts prepared by copolymerization under optimal solvent exhibited superior performance over commercial resins. Moreover, two reaction pathways for the reaction of hemiformal (HF1, CH3OCH2OH) with formaldehyde and methanol were investigated by DFT calculations. The intermediate formed by combining sulfonic acid group with carbocation is favorable for embedding formaldehyde in HF1 to promote chain growth, while the direct attack of methanol on HF1 is conducive to chain termination.

engineering, chemical
Combination of Binary Active Sites into Heterogeneous Porous Polymer Catalysts for Efficient Transformation of CO2 under Mild Conditions

Zhifeng Dai,Yongquan Tang,Fei Zhang,Yubing Xiong,Sai Wang,Qi Sun,Liang Wang,Xiangju Meng,Leihong Zhao,Feng-Shou Xiao

DOI: https://doi.org/10.1016/s1872-2067(20)63679-8

2021-01-01

Abstract:The transformation of CO2 into cyclic carbonates via atom-economical cycloadditions with epoxides has recently attracted tremendous attention. On one hand, though many heterogeneous catalysts have been developed for this reaction, they typically suffer from disadvantages such as the need for severe reaction conditions, catalyst loss, and large amounts of soluble co-catalysts. On the other hand, the development of heterogeneous catalysts featuring multiple and cooperative active sites, remains challenging and desirable. In this study, we prepared a series of porous organic catalysts (POP-PBnCl-TPPMg-x) via the copolymerization metal-porphyrin compounds and phosphonium salt monomers in various ratios. The resulting materials contain both Lewis-acidic and Lewis-basic active sites. The molecular-level combination of these sites in the same polymer allows these active sites to work synergistically, giving rise to excellent performance in the cycloaddition reaction of CO2 with epoxides, under mild conditions (40 °C and 1 atm CO2) in the absence of soluble co-catalysts. POP-PBnCl-TPPMg-12 can also efficiently fixate CO2 under low-CO2-concentration (15% v/v N2) conditions representative of typical CO2 compositions in industrial exhaust gases. More importantly, this catalyst shows excellent recyclability and can easily be separated and reused at least five times while maintaining its activity. In view of their heterogeneous nature and excellent catalytic performance, the obtained catalysts are promising candidates for the transformation of industrially generated CO2 into high value-added chemicals.
Preparation of porous CO 2 adsorbent with high amine-content matrix by unique emulsion template

Xiaohong Chen,Wei Zou,Shengke Liang,Hong Wang,Chen Zhang

DOI: https://doi.org/10.1016/j.seppur.2024.130303

IF: 8.6

2024-11-03

Separation and Purification Technology

Abstract:Adsorbent materials with high adsorption efficiency, good processing stability, and high adsorption rate, are crucial for carbon capture, utilization and storage (CCUS) technology. In this paper, a novel polyethyleneimine (PEI)-embedded porous adsorbent with high amine-content matrix was one-step prepared successfully by a unique high internal phase emulsion (HIPE) polymerization. Firstly, the amphiphilic polyethyleneimine-based carbon nanotubes (CNT-PEI) was synthesized and applied as a Pickering emulsifier, and the interfacial tension was analyzed by a multi-functional tensiometer. Secondly, a large amount of divinylbenzene (DVB) was introduced into the continuous phase of HIPE, and then some mesopores were generated in the framework of the macro-porous polymer, which indicated by specific surface and pore size analyzer and scanning electron microscope (SEM), respectively. Finally, the additional PEI was added into the dispersed phase of HIPE. In such unique HIPE template, PEI was penetrated into the framework and then the porous polymer with high amine-content matrix was achieved. The morphology, the surface element content and the CO 2 adsorption capacity of the obtained porous polymer were characterized by SEM, energy dispersive spectrometry (EDS), and the gas sorption analyzer. When the obtained porous polymer was applied as CO 2 adsorbent, the better comprehensive adsorption performance, including high CO 2 adsorption capacity of 2.87 mmol/g, fast adsorption kinetics, the isosteric heat of adsorption (Q st ) range of 65–68 kJ/mol, exceptional CO 2 /N 2 selectivity with a separation factor up to 118, and stable adsorption–desorption cycles, was exhibited. The superior CO 2 adsorption capacity and adsorption kinetics make it a promising candidate in practical CO 2 adsorption application.

engineering, chemical
Grafting Poly(ethyleneimine) on the Pore Surface of Poly(glycidyl Methacrylate-Trimethylolpropane Triacrylate) for Preparation of the CO2 Sorbent

Lijuan Nie,Lu Bai,Jian Chen,Junsu Jin,Jianguo Mi

DOI: https://doi.org/10.1021/acs.energyfuels.9b03204

IF: 4.6541

2019-01-01

Energy & Fuels

Abstract:A meso/macroporous interconnected polymer sorbent was prepared for CO2 capture by means of suspension polymerization of water-in-oil emulsion in aqueous solution. In the emulsion, poly(ethyleneimine) was dissolved in the water phase and enveloped into the oil phase containing glycidyl methacrylate and trimethylolpropane triacrylate. After polymerization and dehydration, poly(ethyleneimine) chains were grafted onto the macroporous surface of poly(glycidyl methacrylate-trimethylolpropane triacrylate) via the reaction between amine and epoxy groups. Physicochemical characterizations were carried out to evaluate its comprehensive performance in the adsorption/desorption process. The sorbent has exhibited optimum porous structure, high CO2/N-2 selectivity, acceptable CO2 uptake, and enhanced anti-oxidation and anti urea capacities. Notably, the energy penalty for sorbent regeneration is 2.31 MJ.kg(-1)(CO2), lower than the consumptions in the systems of alcohol amine absorption or poly(ethyleneimine)-silica adsorption.
An Efficient Emulsion‐Induced Interface Assembly Approach for Rational Synthesis of Mesoporous Carbon Spheres with Versatile Architectures

Xuanyu Yang,Penghao Lu,Lei Yu,Panpan Pan,Ahmed A. Elzatahry,Abdulaziz Alghamdi,Wei Luo,Xiaowei Cheng,Yonghui Deng

DOI: https://doi.org/10.1002/adfm.202002488

IF: 19

2020-01-01

Advanced Functional Materials

Abstract:Mesoporous carbon matrix with open pore structure, short diffusion length, and large pore size can favor the in‐pore immobilization of active species and facilitate mass diffusion during catalytic reactions. However, a great difficulty still remains on controllable synthesis of uniform mesoporous carbon spheres with these structural characteristics. Herein, using amphiphilic Pluronic F127 as the surfactant, 1,3,5‐trimethyl benzene (TMB) as the pore swelling and interface‐adjusting agent, and dopamine as the carbon source, a robust emulsion‐induced interface assembly approach for rational synthesis of mesoporous carbon spheres is demonstrated. The interface assembly process, including dopamine polymerization and fusion of TMB/F127/dopamine emulsions, can be regulated by tuning the dosage of dopamine and ammonia water, resulting in mesoporous carbon spheres with tunable pore sizes and versatile architectures, such as vesicles, walnut shapes, spheres with dendritic‐like 3D radially aligned mesochannels (RA‐MC), and isolated spherical mesopores. Moreover, the derived RA‐MC is used as a promising matrix to immobilize ultra‐small Au nanoparticles (≈3 nm). The Au/RA‐MC exhibits no mass diffusion limitations in reduction of 4‐nitrophenol, showing high conversion efficiency and good recyclability. This work paves a new avenue for controllable synthesis of mesoporous carbon spheres with well‐developed mesoporosity and architectures and their application as novel heterogeneous catalysts.
Mesoporous poly(ionic liquid)s with dual active sites for highly efficient CO2 conversion

Yawen Fu,Yanan Xu,Zepeng Zeng,Abdul-Rauf Ibrahim,Jin Yang,Shuliang Yang,Yaqiang Xie,Yanzhen Hong,Yuzhong Su,Hongtao Wang,Yanliang Wang,Li Peng,Jun Li,Wendy L. Queen

DOI: https://doi.org/10.1016/j.gee.2021.05.013

2021-06-01

Abstract:It is the first time to introduce the metal salt into quaternary ammonium-based MPILs with high ionic density.The as-prepared P2D-4BrBQA-Zn catalyst showed high CO2 adsorption capacity and yield of cyclic carbonates for broad epoxides substrates under mild conditions.The as-prepared catalyst could be easily separated and showed good stability during the reaction.The strategy of constructing dual active sites could be used to expand the applications of PILs in the future.Atmospheric CO2 concentrations are soaring due to the continued use of fossil fuels in energy production, an anthropogenic activity that is playing a leading role in global warming. Thus, research aimed at the capture and conversion of CO2 into value-added products, such as cyclic carbonates, is booming. While CO2 is an abundant, cheap, non-toxic, and readily accessible C1 feedstock, its thermodynamic stability necessitates the development of highly efficient catalysts that are able to promote chemical reactions under mild conditions. In this work, a novel mesoporous poly(ionic liquid) with dual active sites was synthesized through a facile method that involves co-polymerization, post-synthetic metalation, and supercritical CO2 drying. Due to a high density of nucleophilic and electrophilic sites, the as-prepared poly(ionic liquid), denoted as P2D-4BrBQA-Zn, offers excellent performance in a CO2 cycloaddition reaction using epichlorohydrin as the substrate (98.9% conversion and 96.9% selectivity). Moreover the reaction is carried out under mild, solvent-free, and additive-free conditions. Notably, P2D-4BrBQA-Zn also efficiently promotes the conversion of various other epoxide substrates into cyclic carbonates. Overall, the catalyst is found to have excellent substrate compatibility, stability, and recyclability.<ol class="links-for-figure"><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S246802572100114X-ga1_lrg.jpg">Download : Download high-res image (138KB)</a></li><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S246802572100114X-ga1.jpg">Download : Download full-size image</a></li></ol>

energy & fuels,engineering, chemical,green & sustainable science & technology,chemistry, physical
Organic/Inorganic Support for Immobilizing Iron (iii) Acetylacetonate and Bis(Imino)Pyridyl Ligand Catalyst System for Ethylene Polymerization

Wu Jing,Li Wei,Jiang Binbo,Wang Jingdai,Yang Yongrong

DOI: https://doi.org/10.3724/sp.j.1105.2012.11106

2011-01-01

Abstract:An organic/inorganic support of immobilizing catalysts for ethylene polymerization was devised. The composition of the hybrid catalyst is as following: styrene and acrylic copolymer (PSA) is the organic part for binding iron (III) acetylacetonate and his(imino) pyridyl ligand catalyst,and SiO2, (Davison 955 silical gel) is the inorganic part. The inorganic part is coated by the organic part (PSA) by sol-gel method. The catalyst could produce not only high crystallinity (72%) polyethylene,but also alpha-olefin. We considered the impact of different membrane materials and polymerization conditions (different cocatalyst, pressure, temperature, Al/Fe molar ratio) to the polymerization activity and properties of polymers and found that temperature had the greatest impact to the weight ratio of oligomer to PE. Because of the poor thermal stability of catalyst, the catalytic activity significantly attenuated with increasing temperature. When pressure increased, catalytic activity would increase too. The relationship of pressure and catalytic activity met the cossee catalytic reaction mechanism, which was widely accepted in Ziegler-Natta catalyst ' s ethylene polymerization mechanism. Different membrane materials would affect the final polyethylene product performance, the pure PSA as organic part would increase the molecular weight significantly. Cocatalysts affect not only the catalytic performance,but also the property of the final product. The alkylaluminium as cocatalyst tended to decrease the molecular weight. The iron catalyst system binding on the PSA after the treatment of magnesium chloride could produce the polyethylene of lower molecular weight (M-w = 11. 9 x 10(4)) and higher crystallinity (72%). And the polyethylene s melt index MI (2. 35 g/10min) was higher than the iron catalyst binding on other membrane materials. The polyethylene can be used as the low molecular weight part of bimodal polyethylene.
Bis-ammonium Immobilized Polystyrenes with Co-Catalyzing Functional End Groups As Efficient and Reusable Heterogeneous Catalysts for Synthesis of Cyclic Carbonate from CO2 and Epoxides

Qingyuan Deng,Gaohong He,Yu Pan,Xuehua Ruan,Wenji Zheng,Xiaoming Yan

DOI: https://doi.org/10.1039/c5ra23808k

IF: 4.036

2016-01-01

RSC Advances

Abstract:Novel bis-ammonium immobilized polystyrenes with co-catalyzing functional groups were prepared for efficient synthesis of cyclic carbonate from CO2 and epoxides.
Engineering ultrafine Pd clusters on laminar polyamide: A promising catalyst for benzyl alcohol oxidation under air in water

Qian Wang,Meiling Ge,Yuheng Dou,Fu Yang,Junkai Wang,Yuyang Shao,Agen Huang

DOI: https://doi.org/10.1016/j.mcat.2020.111203

IF: 4.6

2020-12-01

Molecular Catalysis

Abstract:Polymer supports play an important role in noble metal loaded catalysts. In this study, palladium clusters stabilized by several polyamides have been widely studied in the oxidation of benzyl alcohol under airflow. The different kinds of polyamides (PADs) were synthesized with aromatic diamines and trimesoyl chloride by mechanical grinding method and solvent-heat method. Polyamide support was synthesized through mechanical grinding method. And the laminar structure and abundant amide bonds of polyamide can help obtain ultrafine Pd clusters with a mean particle size of 1.76 nm. The Pd0.5@PAD-2-M effectively catalyzed benzyl alcohol into benzaldehyde with a conversion of 96.1 % and turnover number (TON) of 1441 under 90 °C in water which was 2.5 times higher than the commercial Pd/C catalyst. High TON value of 6505 was also achieved in solvent-free system. This work reveals the advantages of laminar structure of polyamide in dispersing Pd clusters and promoting benzyl alcohol conversion. Besides, the carrier properties of amphipathy and substrate adsorption were also investigated to illustrate the significance of interfacial effect for laminar catalyst in heterogeneous catalysis.

chemistry, physical
Macrocellular Polymer Foams from Water in Oil High Internal Phase Emulsion Stabilized Solely by Polymer Janus Nanoparticles: Preparation and Their Application As Support for Pd Catalyst

Fangyuan Yi,Fugui Xu,Yong Gao,Huaming Li,Daoyong Chen

DOI: https://doi.org/10.1039/c5ra01859e

IF: 4.036

2015-01-01

RSC Advances

Abstract:Macrocellular polymer foam with open-cell structure was obtained from Pickering HIPE template stabilized solely by polymer Janus nanoparticles.
A Tough and Highly Active Catalyst Carrier Tailored by Nanoparticles-Encapsulation Poly(ionic Liquid) Hydrogel: Synthesis and Catalytic Applications

Xue Lv,Aowei Lv,Song Tian,Ting Xie,Shulin Sun

DOI: https://doi.org/10.1016/j.eurpolymj.2022.111713

2023-01-01

Abstract:The design and fabrication of functional hydrogel materials for catalysis environmental pollutants has gained immense interest. However, fabricating a hydrogel with both excellent mechanical and catalytic properties remains a challenge. Herein, we successfully achieved polyacrylamide/dimethylaminoethyl methacrylate bromododecane p(AM/DMLB) hydrogel with poly(ionic liquids) microspheres as toughened point and catalytic sites. Under the dual effect of ionic crosslinking network and hydrophobic association network, p(AM/DMLB)/PILs-MPs hydrogels exhibit excellent mechanical properties, such as the tensile strength (1.38 MPa), elongation (2000%), and toughness (1.15 MJ.m(-3)). Simultaneously, the hydrogel could act as a template for loading of Pd nanoparticles without the addition of other additives and crosslinking agents. The metal-loaded composite hydrogels exhibits excellent catalytic property in the reduction of 4-nitrophenol (4-NP) reaction, and reduction rate constants (K-app) was 0.226 min(-1). The strategy offers a novel economically feasible route to catalytic use in the sewage-disposal industry.
Pore-structure-mediated hierarchical SAPO-34: Facile synthesis, tunable nanostructure, and catalysis applications for the conversion of dimethyl ether into olefins

Yu Cui,Qiang Zhang,Jie He,Yao Wang,Fei Wei

DOI: https://doi.org/10.1016/j.partic.2012.12.009

IF: 3.5

2013-01-01

Particuology

Abstract:Hierarchical-structured SAPO-34 catalysts synthesized with polyethylene glycol.
Metal-polyacrylic acid complex aerogels for efficient cycloaddition of CO 2 with propylene oxide

Yuxin Ouyang,Qi Li,Yue Xin,Sunpei Hu,Sanmei Wang,Liangbing Wang

DOI: https://doi.org/10.1016/j.mcat.2023.113462

IF: 4.6

2023-08-18

Molecular Catalysis

Abstract:The cycloaddition reaction of carbon dioxide with propylene oxide captures considerable attention owing to its environmental friendliness, economy and 100% atomic utilization. Homogeneous metal catalysts exhibit excellent performance in cycloaddition reactions, but their widespread applications are limited by complicated preparation and recovery processes. It is important to develop effective strategies to immobilize homogeneous catalysts, and even immobilize active metal ions into solid carriers. Herein, we developed an innovative and universal strategy to immobilize metal ions through the complexation of metal ions with organic polymerization. The Zinc-manganese bifunctional polyacrylic acid complex (ZnMn-PAA) aerogels prepared using this strategy exhibited remarkable catalytic activity and stability in the cycloaddition reaction of carbon dioxide (CO 2 ) and propylene oxide (PO). Mechanism studies revealed that the Zn and Mn central sites respectively enhanced the activation of PO and CO 2 , and the synergistic effect of bimetallic sites guaranteed to the excellent catalytic performance.

chemistry, physical

Co2-In-Peg Emulsion-Templating Synthesis of Poly(Acrylamide) with Controllable Porosity and Their Use As Efficient Catalyst Supports

Advanced Catalyst Technology for Broad/Bimodal Polyethylene, Achieved by Polymer-Coated Particles Supporting Hybrid Catalyst

An Improved Phase-Inversion Process for the Preparation of Silica/Poly[Styrene-Co-(Acrylic Acid)] Core-Shell Microspheres: Synthesis and Application in the Field of Polyolefin Catalysis

Preparation and Characterization of Novel Polyethylene Supported Metallocene Catalysts

Structurally Designed Synthesis of Mechanically Stable Poly(benzoxazine-co-resol)-Based Porous Carbon Monoliths and Their Application As High-Performance CO2 Capture Sorbents

Formulation of porous hetero-frameworks via incorporating poly(ionic liquid)s with porphyrin derivative-functionalized organosilicas for boosting in-situ CO2 capture and conversion

Amphiphilic Covalent Organic Framework Nanoparticles for Pickering Emulsion Catalysis with Size Selectivity

Construction of polymers with highly dispersed reactive phases and open pores for catalyzing the efficient synthesis of CO2 to α‐methylene cyclic carbonates

Polymer-based solid acids with adjustable textural and hydrophobic properties for polyoxymethylene dimethyl ethers synthesis from formaldehyde and methanol

Combination of Binary Active Sites into Heterogeneous Porous Polymer Catalysts for Efficient Transformation of CO2 under Mild Conditions

Preparation of porous CO 2 adsorbent with high amine-content matrix by unique emulsion template

Grafting Poly(ethyleneimine) on the Pore Surface of Poly(glycidyl Methacrylate-Trimethylolpropane Triacrylate) for Preparation of the CO2 Sorbent

An Efficient Emulsion‐Induced Interface Assembly Approach for Rational Synthesis of Mesoporous Carbon Spheres with Versatile Architectures

Mesoporous poly(ionic liquid)s with dual active sites for highly efficient CO2 conversion

Organic/Inorganic Support for Immobilizing Iron (iii) Acetylacetonate and Bis(Imino)Pyridyl Ligand Catalyst System for Ethylene Polymerization

Bis-ammonium Immobilized Polystyrenes with Co-Catalyzing Functional End Groups As Efficient and Reusable Heterogeneous Catalysts for Synthesis of Cyclic Carbonate from CO2 and Epoxides

Engineering ultrafine Pd clusters on laminar polyamide: A promising catalyst for benzyl alcohol oxidation under air in water

Macrocellular Polymer Foams from Water in Oil High Internal Phase Emulsion Stabilized Solely by Polymer Janus Nanoparticles: Preparation and Their Application As Support for Pd Catalyst

A Tough and Highly Active Catalyst Carrier Tailored by Nanoparticles-Encapsulation Poly(ionic Liquid) Hydrogel: Synthesis and Catalytic Applications

Pore-structure-mediated hierarchical SAPO-34: Facile synthesis, tunable nanostructure, and catalysis applications for the conversion of dimethyl ether into olefins

Metal-polyacrylic acid complex aerogels for efficient cycloaddition of CO 2 with propylene oxide