Abstract:The wear of oil pump vanes easily leads to the noise and vibration, even results the decrease of volume efficiency and total efficiency. In order to reduce the friction and improve the lubrication between the vane and the pump inner wall, the micro-machining of micro-structure on the oil pump vanes is proposed. First, the micro-V-grooves with the depth ranging from 500 mu m to 50 mu m were micro-grinding on the top of the vanes by a diamond grinding wheel. Secondly, the experiments were conducted to test the actual flow rate, the output power and the overall efficiency of the oil pump with and without the micro-groove vanes. Then, the computational fluid dynamics (CFD) method was adopted to simulate the pump internal flow field. Finally, the micro-flow field between the internal wall of the oil pump and the top of micro-grooved vanes was analyzed. The results shows that the pump overall efficiency increased as the decrease of micro-groove depth from 500 mu m to 50 mu m and not be affected by the rotate speed and working frequency of the pump rotator. Especially the micro-groove with depth of 50 mu m, the actual flow rate, the output power and the overall efficiency reached to the maximum. From CFD simulation, the velocity of the micro-flow between the surfaces of the vane and inner wall was larger than the pump linear velocity when the microstructure depth is larger than 50 mu m, leading to an internal leakage. When the micro-groove depth is between 10-50 mu m, the velocity of the micro-flow was less than the pump linear velocity and no internal leakage was found, but the oil film thickness is too small to be beneficial to lubrication according to the fluid dynamic characteristics. Thus, for the oil pump equipping with micro-grooved vane with the depth of 50 mu m, the internal leakage not only is avoided but the lubrication efficiency is improved and the oil pump efficiency is also enhanced.

Leakage and Sealing of Scroll Vacuum Pump of Oil-filter

Analysis of force and leakage in water hydraulic motor' s piston pairs

Internal Flow and Cavitation Analysis of Scroll Oil Pump by CFD Method

Design and Simulation Study of a Vacuum-pumping Deaerating Device for Hydraulic Oil

Theoretical Calculation of Leakage in Micro Scroll Compressors

Improving the Oil-Free Scroll Vacuum Pump Efficiency

Discussion on leaking characters in meso-scroll compressor

Theoretical and Experimental Study of Dry Scroll Vacuum Pump

The Mechanism Performance of Improved Oil Pump with Micro-Structured Vanes

Analysis of Status Quo and Development Trend of Scroll Vacuum Pump

Low Leakage and High Volumetric Efficiency Research of Seawater Plunger Pump

Internal clearance flow and leakage loss in multi-stage centrifugal pump

The spatiotemporal distribution characteristics analysis and suppression of the axial tip clearance leakage flow for the liquid-ring vacuum pump

Optimization Design Of The Inner Radius Of The Sealing Surface Of Slipper

Improvement Design of a Vertical Double-stage Self-priming Pump

Study on the Contact and Size of Radial and Flank Leakage Gaps of Scrolls in a Scroll Compressor with CFD/CSM Simulations

Unsteady Leakage Flow Through Axial Clearance of an ORC Scroll Expander

Unsteady characteristic and flow mechanism of a scroll compressor in small-scale compressed air energy storage system

Construction and simulation of novel asymmetrical scroll wraps for scroll vacuum pumps

Research on Leakage in Synchronal Rotary Air Compressor

Investigation of cavitation evolution and hydrodynamic performances of oil film seal with spiral groove