Abstract:The objective of this study is to determine the critical conditions for a detonation wave formation following a Mach reflection of two incident shocks. This problem is central to the propagation mechanism of cellular detonations, where such periodic reflections occur continuously. A new experimental technique is introduced that permits the isolation of this Mach reflection. The technique is inspired by that of White (1963) and uses a detonation passing through a bifurcated converging-diverging nozzle to reproducibly generate the desired shock reflection at its exit, where the two transmitted mis-aligned incident shocks interact. The collision process was monitored with high-speed Schlieren videos. The experiments were performed in mixtures of methane-oxygen and hydrogen-oxygen-argon. Three distinct regimes of transmission were identified: detonation formation, decaying Mach shock followed by a flame, and inert Mach shock with no re-ignition. The condition separating the re-ignition and no re-ignition was very well predicted by the critical decay rate ignition theory of Eckett et al. On the other hand, the transition between detonation formation and ignition was found to correlate much better with the critical curvature concept of quasi-steady curved detonations of Kasimov and Stewart. Both mixtures were found in excellent agreement with this criterion, established on the basis of experimental velocity-curvature data available in the literature for these mixtures. For the hydrogen detonations, this criterion was also in agreement with the critical curvature predicted by ZND theory. For the methane detonations, order of magnitude disagreement was observed with the ZND model prediction, further confirming the propensity of irregular cellular detonations to propagate under higher curvatures than predicted by laminar detonation theory.

The Comparison of the Characteristic Parameters of Flow Fields Behind a Mach Reflected Gaseous Detonation and an Air Shock Wave on a Wedge

Mach reflection of a H2-O2-Ar detonation wave on the rough wedge based on soot track measurements

The Comparison between Diffraction of Air Shock Wave and Gaseous Detonation Wave in a 90° Branched Duct

Analysis of flow-field characteristics and pressure gain in air-breathing rotating detonation combustor

Numerical Investigation of Shock Wave Reflections Near the Head Ends of Rotating Detonation Engines

Numerical Investigation on Effects of Ignition Energy on Two-phase Detonation Wave Formation

Characteristics of the oblique detonation flow field induced by a complex wave structure

Numerical simulations and theoretical analysis of the forward shock wave in a non-premixed air-breathing rotating detonation combustor

Numerical Investigation on New Engine Combustion Charactristic of Helicopter

Numerical Study on Wave Configuration of Wedge-Induced Oblique Detonation Wave: Reactive Boundary Layer Effect

Numerical Investigation on the Interaction Characteristics Between the Gaseous Detonation Wave and the Water Droplet

Transition Process of Mach Reflection for Premixed Mixtures with Different Stability

Numerical Study of Gaseous Detonation Propagation Through a Bifurcated Tube

New applications of soot track record in investigation of gaseous detonation diffraction

Flow-field Visualization for Gaseous Detonation Diffraction Experiments

Experimental Investigation on Shock Waves Generated by Pressurized Gas Release Through A Tube

Investigating the flow characteristics and thermodynamic performance of curved detonation waves

Numerical investigation of two-wave collision and wave structure evolution of rotating detonation engine with hollow combustor

Three-dimensional simulations of detonation propagation in circular tubes: Effects of jet initiation and wall reflection

Numerical study on re-initiation phenomenon of gaseous detonation induced by the coalescence of high temperature regions

The critical conditions for the re-ignition and detonation formation from Mach reflections of curved decaying shocks