Abstract:The mark shearing technique has been successfully utilized for room-temperature strain measurement in solid mechanics research. However, when the method is applied to deformation measurement at high temperature, some new issues will occur. From our experience, we have found that an inevitable thermal radiation will emit from the oven in the measurement and may lead to a distortion of the measuring system. As a result, an undesired measurement error will arise; furthermore, the oxidation resistance marker is crucial to obtain an ideal result. In order to solve the abovementioned issues, the mark shearing techniques for high-temperature deformation measurement are studied in this work, and a novel method for fabricating the marker pattern is proposed, which can be utilized to fabricate a deformation carrier for high temperature on a different specimen surface. In combination with this marker with our self-developed mark shearing system, the high-temperature (1000 degrees C) mechanical properties of the high-temperature nickel alloy (GH4037) was measured.In order to characterize the thermal deformation caused by the oven during the high temperature experiment, the surface temperature distribution of the mark shearing system is measured by an infrared camera. On the basis of this result, the corresponding thermal deformation is analyzed by the finite element analysis (FEM) method. From the analysis result, we can conclude that the virtual strain of the system incurred by thermal radiation cannot be ignored for a long-time measurement.

RESEARCH ON THE METHOD OF MEASURING LONG-TERM DEFORMATION IN A SMALL REGION AT HIGH TEMPERATURE AND ITS APPLICATION

New method for measuring long-term creep deformation in a small region

Measurement of Local Creep Deformation in Cross-Weld Specimen by Optical Fiber Marking and Remote Monitoring

An Optical Gage for High Temperature Strain Measurement by Using Quartz Optical Fiber

Large-Scale Strain Measurement of Micro-Specimens in High-Temperature Environments Based on Efpi

Study on the High Temperature Deformation Measurement Using the Mark Shearing Technique

Study of creep deformation of metal materials with moire interferometry

Research on Full Strain Measurement Performance of Non-intrinsic Optical Fiber F-P Sensor

A New Method of Tensile Performance Testing for Materials at High Temperature and High Strain Rate

Study of non-contact optical metrology for full-field deformation measurement at 1200℃

Creep damage and fracture of weldments at high temperature

STUDY ON DAMAGE OF FATIGUE AND CREEP ON 1Cr11Ni2W2Mov STEEL WELDING JOINT AT 422℃

The test on the inhomogeneous strain field and creep rupture behavior of the weld joint at elevated temperature by digital image correlation method

Study on Creep Damage of Weldments of HK40 Furnace Tubes Based on Creep Damage Mechanics

Research of Welding Effect on Creep Damage of High Temperature Furnace Tubes

Accurate Measurement of Large Strain under High-temperature Environment Based on Fiber Bragg Grating

Development of High Temperature Strain Measuring Technique and the Measuring System

In situ high temperature creep deformation of micro-structure with metal film wire on flexible membrane using geometric phase analysis.

Measurements for Displacement and Deformation at High Temperature by Using Edge Detection of Digital Image.

Application of high-temperature optical fiber sensor in temperature and strain testing of hot structure

Measurement of Micro Region Creep Deformation in the Multi-Layer Coating with Digital Speckle Correlation System