Abstract:The surfaces of the hydrogen storage alloy powders (MlNi4.0Co0.6Al0.4) before and after surface treating were analyzed by X-ray photoelectron spectroscopy (XPS), electron probe micro-analysis (EPMA), inductively coupled plasma spectroscopy (ICP). It was found that a Ni-rich surface layer was produced and the specific surface area was augmented by the surface treatment with a hot 6MKOH or 6MKOH+0.02MKBH4 solution due to the preferential dissolution of Al and the etching of the hot alkaline solution. The effect of the surface treatments on the hydrogen adsorption on the alloy surface was for the first time evaluated by means of the thermal desorption spectroscopy (TDS). It was found that the surface treatments enhanced the hydrogen adsorption on the alloy surfaces and produced new adsorption states. The untreated alloy had only one hydrogen adsorption peak at about 400K. There were two hydrogen adsorption states at about 540 and 630K on the surface of the alloy treated with 6MKOH. In the case of the alloy treated with 6MKOH+0.02MKBH4 three hydrogen adsorption peaks were observed at about 390, 540 and 630K, respectively. The results of electrochemical measurements showed that the treated alloy electrodes exhibited higher exchange current density for the hydrogen electrode reaction than the untreated hydrogen alloy. After the surface treatment, the hydrogen adsorption enhancement on the treated alloy surface facilitated the hydrogen electrode reaction process on the alloy electrodes and results in good activation and low polarization resistance.

Study on Surface Treatment of Hydrogen Storage Alloy

Effect of Surface Treatment on the Structure and High-Rate Dischargeability Properties of AB5-type Hydrogen Storage Alloy

Effect Of Buffer Solution Surface Treatment On Electrochemical Performances Of Mm (Nicomnal)(5) Hydrogen Storage Alloy

Surface treatment for hydrogen storage alloy of nickel/metal hydride battery

Effects of Surface Treatments of Mlni(4.0)Co(0.6)Al(0.4) Hydrogen Storage Alloy on the Activation, Charge/Discharge Cycle and Degradation of Ni/Mh Batteries

Cyclic voltammetry and electrochemical impedance of MmNi3.6Co0.7Mn0.4Al0.3 alloy electrode before and after treatment with a hot alkaline solution containing reducing agent

Surface analysis, hydrogen adsorption and electrochemical performance of alkali-reduce treated hydrogen storage alloy

Hydrogen adsorption on hydrogen storage alloy surface and electrochemical performances of the MlNi4.0Co0.6Al0.4 alloy electrodes before and after surface treatment

Electrochemical Investigations of Activation and Degradation of Hydrogen Storage Alloy Electrodes in Sealed Ni/MH Battery

Surface treatments of hydrogen storage alloy improve charge-discharge performances of Ni/MH battery

Effects of Annealing Treatment on Microstructure and Electrochemical Performances of Co-free MlNi4.0Al0.3Si0.1Fe0.6 Hydrogen Storage Alloy

Influence of Annealing Treatment on Microstructure and Cycling Stability of La-Rich Ml(Nicomnal)(5) Alloy Electrode for Ni/Mh Batteries

Influences of annealing treatment on electrochemical properties of La-Mg-Ni-Co hydrogen storage alloy

Effects of Ca-substitution and surface treatment on electrochemical performances of Ml1.0-xCaxNi4.0Co0.6Al0.4 hydrogen storage alloy electrodes

Effect Of Fluorination Treatment On Electrochemical Properties Of M1ni(3.5)Co(0.6)Mn(0.4)Al(0.5) Hydrogen Storage Alloy

Effects of surface treatment on performances of metal hydride electrodes and Ni/MH batteries

Effects of Pretreatment on MlNi4.00Co0.45Mn0.38Al0.3 Hydrogen Storage Alloy Powders and the Performance of 6 Ah Prismatic Traction Battery

Effect of Reducing Cobalt by Multi-alloying on Properties of Hydrogen Storage Alloys

Effects of Additions on AB5-type Hydrogen Storage Alloy in MH–Ni Battery Application

Effects of Alkaline Treatment of Hydrogen Storage Alloy on Electrocatalytic Activity for NaBH4 Oxidation

Studies of Surface Treatment Methods and Their Operating Mechanisms for Activation of Hydrogen Storage Electrode