Abstract:An accurate determination of the contact pressure and local sliding in a cold rolling process is an essential step towards the prediction of the roller’s life due to wear damage. This investigation utilized finite element analysis to quantify the local contact pressure and local sliding over the rolling bite in a plate cold rolling process. It was the first study to quantify the local sliding distance in a rolling process using the Finite Element Analysis (FEA). The numerical results indicate that the local contact pressure over the rolling bite demonstrates a hill profile, and the peak coincides with the neutral plane. The local sliding distance over the rolling bite demonstrates a double-peak profile with the two peaks appearing at the forward slip and backward slip zones respectively. The amplitude of sliding distance in the backward slip zone is larger than that in the forward slip zone. A stick zone was confirmed between the forward slip and backward slip zones. According to a parametric study, the local contact pressure and sliding distance decrease when the thickness reduction is reduced or the diameter of the roller is decreased. The location of the neutral plane always presents at the rolling exit side of the rolling bite’s center. The size of the stick zone enlarges and the sizes of slip zones shrink significantly when the friction coefficient is increased. Finally, a novel concept of wear intensity was defined to examine the wear of the roller based on the local contact pressure and local sliding distance. The results show that a two-peak wear response exists in the backward and forward slip zones. The magnitude of the wear in the backward slip zone is larger than that in the forward slip zone. For a given roller and blank material combination, using a smaller thickness reduction, a smaller diameter roller and a higher friction coefficient condition can reduce the wear of the roller for a single rolling cycle. The current paper develops an understanding of rolling contact responses to the wear of the roller in rolling process. The research method can also be applied to study other rolling or sliding wear problems.

Analytical Study on Lubrication States and Velocity in Aluminum Foil Rolling Process

Performance of lubricating oil film in aluminium foil rolling

Thermal Analysis of Aluminum Rolling Lubricant

Study on Comprehensive Evaluation of Lubrication Base Oil for Aluminum Foil Rolling

Surface roughness effects in aluminium rolling

The Research and Production of Lubricant for Cast-rolling of Aluminium

Relationship of Oil Composition and Lubricating Characteristics in Cold Rolling Aluminum Strips

A Numerical Study on Contact Condition and Wear of Roller in Cold Rolling

Evaluation of Lubricants for Cold Rolling Aluminum Strips

Analysis and Prospects of Lubrication and Friction Characteristics in Cold Strip Rolling: A Review

Forming Analysis of Aluminum Alloy Workpiece

Influence of friction and lubrication on the formability of aluminium alloy plate

Research and development of friction and lubrication for aluminium alloy sheet forming

Analysis of surface roughness of cold-rolled aluminium foil

Analytical study on adsorption characters of lubricating additive during aluminum rolling

Analysis of the Interface Lubrication Performances of Water Lubrication Bearing

Study on Feat Effect in Aluminum Foil Cold Rolling Press

Influence of Ironing Roller on the Wrinkling of a 4N6 Aluminum Foil during the Coiling Process of Cleaning Line

Parametric Analysis of Mixed Lubrication Characteristics in Work Zone of Strip Rolling

Influences of Surfactants on Properties of Lubricant Used in Hot Rolling of Aluminum

Rolling of Thin Strip and Foil: Application of a Tribological Model for “mixed” Lubrication