Abstract:Abstract Water distribution networks require huge investment for construction. Involved people, especially researchers, are always seeking to find a way for decreasing costs and achieving an efficient design. One of the main factors of the network design is the selection of proper diameters based on costs and deficit of flow pressure and velocity in the network. The reduction in construction costs is accomplished by minimizing the diameter of network pipes which leads to the pressure drop in the network. Supplying proper pressure in nodes is one of the important design principles, and low pressure will not provide a complete water supply at the consumption site. Therefore, in this research, the problem of optimization in several sample networks was defined with the objectives of cost minimization and minimization of pressure deficit in the whole network. The EPANET software was used for hydraulic analysis of sample networks, and the multi-objective optimization process was performed by coding NSGA-II and MOPSO algorithms in the MATLAB software environment and linking them to EPANET. The cost function was initially defined only by considering the relationship between cost and diameter and the length of pipes, and in the next definition, the cost resulted by violation of the allowable pressure range was added to this function In both cases, the schedule for achieving the optimal answer was executed. The results showed that these algorithms have a high ability to find optimal solutions and are able to optimize the network in terms of cost and pressure by finding the appropriate pipe diameter. The time for reaching convergence was reduced by considering the cost of violation of the allowable pressure limits significantly and the optimal answer is obtained in a small number of repetitions. In NSGA-II and MOPSO algorithms in two-looped network with 20 and 30 iterations and run time of 0.66 and 0.8 s, respectively, and in Lansey network with 150 and 250 iterations and run time of 5.7 and 9.5 s, the optimal solutions were obtained.

Multi-objective Optimal Design of Large-scale Urban Water Distribution Network

Optimal Dispatching of Large-scale Water Supply System

Optimal operation of water supply systems based on genetic algorithm

Establishment and Application of Coupled Model for Optimal Operation of Water Supply Network

An Efficient Hybrid Approach for Multiobjective Optimization of Water Distribution Systems

An Efficient Decomposition and Dual-Stage Multi-Objective Optimization Method for Water Distribution Systems with Multiple Supply Sources

A graph decomposition‐based approach for water distribution network optimization

A combined NLP-differential evolution algorithm approach for the optimization of looped water distribution systems

Improving the Effectiveness of Multiobjective Optimization Design of Urban Drainage Systems

Improving the efficiency of multi-objective evolutionary algorithms through decomposition: An application to water distribution network design

Multi-objective Optimal Design and Decision of Water Distribution Network Based on Pareto Optimal Front

Non-dominated Sorting Genetic Algorithms-IIBased on Multi-objective Optimization Model in the Water Distribution System

Design optimization of water distribution networks: real-world case study with penalty-free multi-objective genetic algorithm using pressure-driven simulation

Hybrid Multi-Objective Genetic Algorithm for Optimal Design of Water Supply Network

Many-objective optimization model for the flexible design of water distribution networks

Multi-Objective Optimal Design of Water Distribution Networks Accounting for Transient Impacts

Improvement of the performance of NSGA-II and MOPSO algorithms in multi-objective optimization of urban water distribution networks based on modification of decision space

Multi-objective optimization of water supply network rehabilitation

Multi-criteria decision-making methods for optimal design of intermittent water distribution network

Theoretical Considerations of Joint Optimal Model for Water Allocation and Pipe Placement

Multi-objective Optimization Design of Integrated Pump Station Based on NSGA-III