Abstract:Current flexible/compliant tactile sensors suffer from low sensitivity and high hysteresis introduced by the essential viscosity characteristic of soft material, either used as compliant sensing element or as flexible coverage. To overcome these disadvantages, this paper focuses on developing a tactile sensor with a smart hybrid structure to obtain comprehensive properties in terms of size, compliance, robustness and pressure sensing ability so as to meet the requirements of limited space applications such as prosthetic fingertips. Employing micro-fabricated tiny silicon-based pressure die as the sensing element, it is easy to have both small size and good mechanical performance. To protect it from potential damage and maintain the compliant surface, a rigid base and a soft layer form a sealed chamber and encapsulate the fixed die together with fluid. The fluid serves as highly efficient pressure propagation media of mechanical stimulus from the compliant skin to the pressure die without any hazard impacting the vulnerable connecting wires. To understand the pressure transmission mechanism, a simplified and concise analytic model of a spring system is proposed. Using easy fabrication technologies, a prototype of a 3 x 3 sensor array with total dimensions of 14mm x 14mm x 6.5mm was developed. Based on the quasi-linear relationship between fluid volume and pressure, finite element modeling was developed to analyze the chamber deformation and pressure output of the sensor cell. Experimental tests of the sensor prototype were implemented. The results showed that the sensor cell had good sensing performance with sensitivity of 19.9 mV N-1, linearity of 0.998, repeatability error of 3.41%, and hysteresis error of 3.34%. The force sensing range was from 5 mN to 1.6 N.

Study of Tactile Sensor In Bionical Artificial Hand

Study of Myoelectric Bionic Artificial Hand with Tactile Sense

A Novel Silicon Based Tactile Sensor On Elastic Steel Sheet For Prosthetic Hand

A Compliant Three-Axis Force Sensor with Solid–Liquid Hybrid Cover for Prosthetic Fingertip

A Novel Silicon Based Tactile Sensor with Fluid Encapsulated in the Cover Layer for Prosthetic Hand

Design and simulation of bio-inspired flexible tactile sensor for prosthesis

A Micro-wires Based Tactile Sensor for Prosthesis.

Preliminary Study on Piezoresistive and Piezoelectric Properties of a Double-Layer Soft Material for Tactile Sensing

A High-Resolution, Ultrabroad-Range and Sensitive Capacitive Tactile Sensor Based on a CNT/PDMS Composite for Robotic Hands.

Three-Dimensional Finite Element Analysis of a Novel Silicon Based Tactile Sensor with Elastic Cover.

Development of Flexible Tactile Sensor for the Envelop of Curved Robotic Hand Finger in Grasping Force Sensing

A Flexible Tactile Sensor Array Based on Pressure Conductive Rubber for Contact Force Measurement and Slip Detection

Development of Fully Flexible Tactile Pressure Sensor with Bilayer Interlaced Bumps for Robotic Grasping Applications.

Myoelectric Prosthetic Hand with Tactile and Slip Feedback Functions

A Mechatronic Platform for Studies of Tactile Sensory System on Prosthesis Hand

A Flexible Capacitive Tactile Sensor Array for Prosthetic Hand Real-Time Contact Force Measurement.

Smart structure with elastomeric contact surface for prosthetic fingertip sensitivity development

Design of a Finger-Tip Flexible Tactile Sensor for an Anthropomorphic Robot Hand

A Novel Tactile Sensing Array with Elastic Steel Frame Structure for Prosthetic Hand.

Design, Fabrication, and Validation of a Flexible Tactile Sensor for a Hand Prosthesis

Perception of Static and Dynamic Forces with a Bio-inspired Tactile Fingertip