Abstract:Irreversible dilatancy, a component of volumetric change due to shearing, is a key characteristic of soil–structure interfaces. A series of 3D large-scale direct-shear tests was conducted on a gravel–structure interface to explore the consistency behavior and mechanism of the irreversible dilatancy subjected to various 3D loadings. Irreversible dilatancy is primarily induced by particle crushing and grows monotonically and smoothly due to cyclic shearing. It presents distinct 3D features determined by 3D loading conditions, such as shear path type, tangential displacement amplitude, displacement amplitude ratio, and normal stress. The effect of 3D loading conditions on the irreversible dilatancy is attributed to varied shear work density induced by shearing. Increased tangential displacement amplitude, displacement amplitude ratio, and normal stress lead to enlarged shear work density, thereby enhancing the particle crushing, increasing the relative interface breakage and magnifying the irreversible dilatancy. Consistency behavior is discovered to identify the unique relationship of the irreversible dilatancy against shear work density, independent of 3D loading conditions, and can be captured perfectly by the hyperbolic model for unification, which considerably simplifies the 3D constitutive modeling of the interface. If the interface is sufficiently sheared, an ultimate grain size distribution is found to exist, at which the particles are crushed negligibly, and the relative interface breakage and irreversible dilatancy achieve ultimate magnitudes. They also correspond to the internal and macroparameters for quantifying the particle crushing and physical evolution of the interface, respectively.

Effect of Load Duration on Particle Breakage and Dilative Behavior of Residual Soil

Theory Of 1-D Consolidation Of Soft Clayey Soil With Impeded Boundaries Under Cyclic Loading

Study on Mechanical Properties of Deep Expansive Soil and Coupling Damage Model of Freeze–Thaw Action and Loading

Experimental Study on the Effect of Coarse Grain Content on the Dilatancy and Particle Breakage Characteristics of Coarse-Grained Soils

Experimental Study On Particle Breakage Of Carbonate Gravels Under Cyclic Loadings Through Large-Scale Triaxial Tests

Crushing and Flooding Effects on One-Dimensional Time-Dependent Behaviors of a Granular Soil

Cyclic Deformation Behaviour of Natural K 0 -Consolidated Soft Clay under Different Stress Paths

Stiffness Degradation and Plastic Strain Accumulation of Clay under Cyclic Load with Principal Stress Rotation and Deviatoric Stress Variation

Experimental and Constitutive Modeling Investigations of the Mechanical Behaviors of a Gravelly Soil Material Under Large-Size Triaxial Cyclic Tests

Effects of Strain Rate and Specimen Size on the Behavior of Fine-Grained Soils

Influence of Lateral Multistage Unloading Intensity on Mechanical Properties of Reconstituted Coastal Soils Containing Silty Particles

Consistency Behavior and Mechanism of the Irreversible Dilatancy of Gravel – Structure Interface Subjected to 3D Loadings

Experimental Study on Loading-Creep Coupling Effect in Rockfill Material

Effects of Drying-Wetting Cycles on the Mechanical Behavior of Reconstituted Granite-Residual Soils

Deformation Behavior of Coarse-Grained Soil as an Embankment Filler under Cyclic Loading

Cyclic and creep combination effects on the long-term undrained behavior of overconsolidated clay

Experiment on Undrained Dynamic Strength and Deformation Characteristics of Saturated Gravelly Soil

Creep Properties of Expansive Soils under Triaxial Drained Conditions and its Nonlinear Constitutive Model

Evolution of Axial Cumulative Strain and Micro-Pore Structure Characteristics of Solidified Mud under Cyclic Loading

Effect of Gradation on the Strength and Stress-Dilation Behavior of Coarse-Grained Soils in Drained and Undrained Triaxial Compression

Effect of Gradation on the Strength and Stress-Dilatancy of Coarse-Grained Soils: A Comparison of Monotonic Direct Simple Shear and Triaxial Tests