Abstract:Purpose The purpose of this paper is to investigate the tribological properties, antiwear mechanism and anticorrosion properties of two novel halogen-free borate ionic liquids (ILs) in 500 N base oil. Design/methodology/approach Different qualities of borate ILs were added to 500 N, and their tribological properties were tested on a four-ball machine. The tribological properties of the additives were evaluated by measuring the wear scar diameter (WSD) and average coefficient of friction. The antiwear and antifriction mechanism of ILs was analyzed by energy dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). Findings The corrosion degrees of the two borate ILs 1-butyl-3-octyl-imidazole bis(mandelato)-borate ([OBIM][BMB]) and 1-butyl-3-(3-methoxypropyl)-imidazole bis(mandelato)-borate ([MPBIM][BMB]) are 1b and 1a, respectively, suggesting that they both possess significant corrosion resistance and can effectively protect the steel surface. When the concentration of [OBIM][BMB] and [MPBIM][BMB] is 2.5 Wt.%, the friction coefficient of 500 N is reduced by 37.3% and 26.2%, respectively. According to the analysis of the thermo gravimetric analyzer curves, [OBIM][BMB] and [MPBIM][BMB] decomposed at 369.7°C and 374.3°C, respectively, indicate that two additives both can be applied in higher temperature condition. The results of XPS and scanning electron microscope (SEM) reveal that [OBIM][BMB] and [MPBIM][BMB] both can react with the steel surface, thereby forming chemical films composed of iron oxide, B 2 O 3 and organic N-containing compounds. Originality/value Two new environmentally friendly borate ILs were synthesized and their tribological properties in 500 N base oil were investigated for the first time.

Hydrolytic stability and triboligical properties of organic borate esters as lubricant additives

Synthesis, Hydrolytic Stability and Tribological Properties of Novel Borate Esters Containing Nitrogen As Lubricant Additives

Synergistic Lubricating Effects of Borate Ester with Heterocyclic Compound

SYNERGISTIC ANTIWEAR PROPERTIES BETWEEN BORATES AND ORGANIC TIN COMPOUNDS IN LUBRICANT

Tribological And Antioxidation Properties Study Of Two N-Containing Borate Ester Derivatives As Additive In Rapeseed Oil

Bio-based silsesquioxanes nano hybrids for enhancing the tribological performance of silicone oil: A DFT and experimental study

SYNERGISTIC ANTIWEAR EFFECTS OF ORGANIC BORATE ESTER CONTAINING NITROGEN AS LUBRICATING OIL ADDITIVE

Tribollogical Synergism Between Borates And Sn(Ii) Or Sn(Iv) Compounds

Synergistic Tribological Performances Of Borate Additive In Lubricants

Controllable synthesis of 0D, 1D, and 2D nano lanthanum borates and their dispersion stabilities and tribological properties in rapeseed oil

Opportunities for Replacement of Phosphorus and Dithiophosphates in Lubricating Oil with Borate Ester Additive Containing Nitrogen

Tribological characteristics and mechanisms of boronitrogenated methyl epoxyoleate as bio‐based additive in petroleum lubricant

Tribological study of N-containing borate derivatives and their synergistic antioxidation effects with T531

The Synergistic Antiwear Performances of Organic Titanium Compounds Containing Sulfur with Borate Ester Additive

Tribological Investigation of Layered Sodium Silicate As Lubricant Additives Prepared by Freezing Titration Ion Exchange

High performance lubricants prepared from Naphthalene-1,4,5,8-Tetracarboxylic acid: Synthesis, physicochemical and Tribological properties

Tribological Performance and Wear Mechanism of Compound Containing S, P, and B as EP/AW Additives in Copper Foil Oil

Preparation of Nanofluid of Lanthanum Borate Nanosheets and Investigation of Its Tribological Properties and Tribomechanisms in Different Base Oils

Investigation of the Tribological Properties of Two Different Layered Sodium Silicates Utilized As Solid Lubrication Additives in Lithium Grease

Frictional evaluation of halogen-free ionic liquids with low corrosion degree and high decomposition temperature on steel surface

Superior lubricity and corrosion-resistance response of solvated ionic liquids containing lithium and borate