Abstract:The discontinuities of a five-axis linear-segment toolpath result in fluctuation in the feedrate, acceleration and jerk commands that lead to machine tool vibration and poor surface finish. For path smoothing, with the global curve-fitting method it is difficult to control fitting error and the local corner-smoothing method has large curvature extreme. For path synchronization, the parameter synchronization method cannot ensure smooth rotary motion. Aiming at these problems, this paper proposes a double B-spline curve-fitting and synchronization-integrated feedrate scheduling method. Two C2-continuous and error-bounded B-spline curves are produced to fit tool-tip position and tool orientation, respectively. The fitting error is controlled by locally refining the curve segments that exceed the fitting tolerance. The tool-tip position trajectory is firstly planned to address axial kinematic constraints in the feedrate scheduling process. Then the feedrate is deformed for the tool orientation to guarantee smooth rotary motion as well as to share the same motion time with the tool-tip position segment by segment. The feasibility and effectiveness of the proposed method have been validated by simulations and experiments on the S-shape test piece. Simulations show that the proposed curve-fitting method can generate smooth toolpath and constrain fitting error. The proposed feedrate scheduling method can guarantee smooth rotary motion and keep axial motions under kinematic limits, compared with the method that does not consider axial kinematic constraints and the parameter synchronization method. Experimental results verify that the proposed curve-fitting method can generate smooth tool path under fitting tolerance, and the proposed feedrate scheduling method can produce smooth and restricted axial motions.

Kinematic Simulation and Trajectory Optimization for the Enclesed Five-bar Feeding Mechanism of Sewing Machine

Kinematics and dynamicsanalysis for slotting machine six bar linkage

Study on Dynamic Simulation of Transverse Needle Mechanism

The Analyses of Kinematics and Kinematics Simulation of a New Typed 5-DOF Hybrid Machine Tool

Five-axis trajectory generation based on kinematic constraints and optimisation

Kinematic Analysis for the Thread Taking-up Mechanism of Sewing Machine and the Optimum Synthesis

The Application of Genetic Alogorithm in Optimal Design of the Sewing Machine Feeding Mechanism

Implementation of Pattern Sewing for Intelligent Knot Tying Machine

Optimal design and experiments of a novel bobbin thread-hooking mechanism with RRSC (revolute–revolute–spherical–cylindrical) spatial four-bar linkage

Optimization Design for Complicated Relative Motion of Swinging Component-Planar Fixed Cam Mechanism

Parameter Optimization of Large-Size High-Speed Cam-Linkage Mechanism for Kinematic Performance

Kinematics Analysis and Simulation of Five-Bar Mechanism Used in Multi-Function Bed

Research on Structure Optimization of Longitudinal Feed System Design of CNC Spinning Machine

Analysis about Modeling and Simulation of Tool Feeding System

On Study of Trajectory Characteristic of Hybrid-driven Fiye-bar Mechanisms

Trajectory optimization of the redundant manipulator with local variable period under multi-machine coordination

A research of spinning machine: Effect of different structures of feed system on the static and dynamic characteristics

Double B-Spline Curve-Fitting and Synchronization-Integrated Feedrate Scheduling Method for Five-Axis Linear-Segment Toolpath

Kinematics Simulation of 5-DOF Parallel Mechanisms

Mechanism Analysis and Optimization Design of Exoskeleton Robot with Non-Circular Gear–Pentabar Mechanism

The Optimum Trajectory Planning of Planar 2-DOF Sever Bar Hybrid Driven Mechanism