Abstract:Distillate fuels have specifications on flow properties at low temperature. Catalytic dewaxing is an important process to upgrade fuels to meet these specifications. Mobil Oil Corporation, a predecessor of ExxonMobil Corporation, patented the zeolite ZSM-5 catalyst in 1972. ZSM-5 catalyzed distillate dewaxing was first introduced after intensive pilot tests in 1978 and has been continuously improved upon. Today, the ExxonMobil Distillate Dewaxing (MDDW) process is used worldwide more than 30 licensees who have a combined dewaxing capacity in excess of 160,000 BPD. A more recent Distillate dewaxing process via isomerization, which uses proprietary bifunctional molecular sieve – metal catalys. ExxonMobil catalyst was first introduced in ExxonMobil’s Jurong refinery in 1990. This process gives higher distillate yield by isomerizing waxy materials in a feedstock, rather than removal by cracking. The technology lends itself to use with other catalysts in units to produce low pour point , ultra-low sulfur distillate products with premium qualities. Details of the ExxonMobil Isomerization Dewaxing (MIDW) process are proprietary. Cold Flow Properties Distillate fuels typically have property specifications at low temperatures. These specifications ensure a sustained supply of fuel to an engine or burner at conditions of low ambient temperature. As a fuel is cooled, wax compounds that are present will start to crystallize and affect the flow characteristics of the fuel. There are three main specifications that are used to define flowability at low temperatures: • Pour Point (ASTM D97): Pour point is the temperature at which there will be no movement of a chilled sample in a test jar. As the sample is chilled, one can often observe the formation of a layer of gelatinous wax crystals. As the temperature is lowered further, this layer increases and at some point, the sample will no longer flow. • Cloud Point (ASTM D2500): Cloud point is the temperature at which a haze or "cloud" in fuel appears. It is an indication that wax crystals have begun to form. Therefore, the cloud point temperature is higher than that of pour point. The specification temperature varies with the intended use of the fuel.. • CFPP (IP309): Cold filter plugging point is defined as the temperature at which a sample of oil fails to pass through a wire mesh filter in a specified amount of time. ExxonMobil's experience is that this temperature is often midway between the pour and cloud points. Methods for Improvement of Cold Flow Properties The cold flow properties of a distillate are affected by its original source (crude type) and any subsequent processing. Improvement of cold flow properties can be achieved in several ways: 1. Additives: Chemical additives exist to improve pour point. These are less effective for cloud point and CFPP. 2. Addition of lighter material: Lighter distillate typically has better cold flow properties than heavier diesel. The addition of lighter material, such as kerosene, can improve the properties of the blend.

A New Kind of Pour Point Depressant: Diesel from Direct Coal Liquefaction

Influence of polymers with surfactant properties as pour point depressants on the cold flow properties of diesel fuel

Experimental characterization on injection and spray of coal-derived liquid fuel

Investigation on Thermal Properties of a Novel Fuel Blend and Its Diesel Engine Performance

Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

Grafting tetradecyl methacrylate-carbic anhydride (CA) or tetradecyl methacrylate-tetrahydrophthalic anhydride (THPA) co-polymers onto surface-modified nano silica to develop of pour point depressants for diesel

The effect of methacrylate ternary polymer on the low-temperature flowability of coal-based diesel

Building methodology for evaluating the effects of direct coal liquefaction using coal structure-chemical index

Synthesis and application of a novel diesel fuel pour-point depressant

Renewable biocrude blends boost tribological properties and maintain fuel performance of diesel

ExxonMobil Catalytic Dewaxing-A Commercial Proven Technology

Converting brown coal to synthetic liquid fuels through direct coal liquefaction technology: Techno‐economic evaluation

Deep Catalytic Oxidative Desulfurization of Fuels by Novel Lewis Acidic Ionic Liquids

Higher alcohol acetoacetate aluminum chelates as pour point depressant and impedance reducing agent of biodiesel-diesel blends

Combustion and Emission Characteristics of Direct Injection Compression Ignition Engine Fueled with Full Distillation Fuel (FDF)

Oxidative Desulfurization of FCC Diesel Oil Using Amphiphilic Catalyst Combined with Solvent Extraction

Thermodynamic Analysis of a Solar Thermochemical Cycle-Based Direct Coal Liquefaction System for Oil Production

Study on Emulsification Technology of Diesel-Ethanol Based on Functional Group and Emulsifying Process

Combustion and Emission Characteristics of Direct Injection Compression Ignition Engine Fueled with Wide Distillation Fuel (Wdf)

Evaluation of the star anise extract as a natural cold flow improver for enhancing the cold flow properties of diesel fuel

Depression effect of the cold filter plugging point by blending of palm oil, palm stearin, and palm olein biodiesels in petrodiesels