Abstract:FAF(Fast Axial Flow) CO2 lasers are widely used in the areas of welding, cutting and texturing etc. These applications require the laser power supply with higher performance. In the paper, a switch power supply for the FAF CO2 laser was developed, which can provide continuous and pulsed discharge voltage. It makes a FAF CO2 laser to be competent for complex machining. The switch power supply adopts the half-bridge resonant switching circuit. IGBT was adopted as the switch device, which integrates the drive circuit and protection circuit. A microchip was used in the power as the control core, which translates the control signal from users to corresponding driving signal for IGBT, gathers and deals with the faults of the switch power supply. The experiment of the switch power supply was made on a fast axial flow CO2 laser. The experiments show that the switch power supply can work on the FAT CO2 laser well. The discharge current can be adjusted from 5mA to 120mA. It can switch the discharge freely between continuous mode and pulse mode. The pulse frequency can be adjusted from 20 to 2000Hz. Utilizing the switching power supply, the efficiency of the laser was improved. The dissipation power of the IGBT is very small, and the power supply brings fewer high frequency harmonic, lower interference.

Power Control System Design of 3kw Fast-Flow Axis High Power CO Laser

Control System of an Excitation Power Supply for Fast Axial Flow CO 2 Lasersupda

Control System of a High Power Fast Axial Flow CO_2 Laser

Integrated Control System of Transverse Flow CO 2 Laser and Its Application

Power Measure and Control System for High Power Laser in Real-Time

Design and Principle of Power Controlling Circuit for RF CO2 Laser

The Application on PLC Control System of Fast Axial Flow CO2 Laser

Practical power controller design for RF excited CO2 lasers

High Voltage Power Supply of He-Ne Laser Based on ARM

Design and implementation of numerical control laser driver circuit with large current and narrow pulse width

Fast axial flow CO2 laser gas recycle control system

Optimization of control system for threE-working-position high effIciency laser welding

Study on Real-Time Power Control of Laser Cutting Systems

Study of regulating current method for He-Ne laser power supply

Switch power supply of fast axial flow CO2 laser for complex machining - art. no. 682517

Design of Digital Adjustable Optical Power Control System of Laser Diode

Characteristics of CW/pulse discharge for high power transverse flow CO2 laser and its application

Design Of High Power Ld Soft-Switching Linear Drive Power Supply And Temperature Controller

A system to control the energy of a high-power laser system with application to x-ray generation at ultra-high intensity

Power Control and Synchronization Control Between Power and Motion in Laser-Cutting Machining

A Digital Controlled Laser Power Supply System