Abstract:The hydrodeoxygenation of furfural (FU) was investigated over Fe-containing MgO catalysts, on a continuous gas flow reactor, using methanol as a hydrogen donor. Catalysts were prepared either by coprecipitation or impregnation methods, with different Fe/Mg atomic ratios. The main product was 2-methylfuran (MFU), an important highly added value chemical, up to 92% selectivity. The catalyst design helped our understanding of the impact of acid/base properties and the nature of iron species in terms of catalytic performance. In particular, the addition of iron on the surface of the basic oxide led to (i) the increase of Lewis acid sites, (ii) the increase of the dehydrogenation capacity of the presented catalytic system, and (iii) to the significant enhancement of the FU conversion to MFU. FTIR studies, using methanol as the chosen probe molecule, indicated that, at the low temperature regime, the process follows the typical hydrogen transfer reduction, but at the high temperature regime, methanol dehydrogenation and methanol disproportionation were both presented, whereas iron oxide promoted methanol transfer. FTIR studies were performed using furfural and furfuryl alcohol as probe molecules. These studies indicated that furfuryl alcohol activation is the rate-determining step for methyl furan formation. Our experimental results clearly demonstrate that the nature of iron oxide is critical in the efficient hydrodeoxygenation of furfural to methyl furan and provides insights toward the rational design of catalysts toward C–O bonds’ hydrodeoxygenation in the production of fuel components.

Causes for Deactiation of the Catalysts for Hydrogenation of Furfural to Furfurol

Valorization of Humins into Furanyl Functionalized Biochar for Selective Hydrogenation of Five-Member Rings of Furan Compounds

In-situ Reduction of Furfural to Furfuryl Alcohol with Hydrogen Derived from Aqueous-Phase Reforming of Methanol

Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Catalytic Transfer Hydrogenation of Furfural to Furfuryl Alcohol by Cu-Pd/Al2O3 in Near-Critical Isopropanol

Study on Deactivation by Sulfur and Regeneration of Pd/C Catalyst in Hydrogenation of N-(3-nitro-4-methoxyphenyl) Acetamide

Highly efficient Cu-based catalysts for selective hydrogenation of furfural: A key role of copper carbide

Furfuryl alcohol from furfural by hydrogenation under atmospheric pressure

Understanding Activity Trends in Furfural Hydrogenation on Transition Metal Surfaces

Metal‐Catalyzed Hydrogenation of Biomass‐Derived Furfural: Particle Size Effects and Regulation Strategies

Aerobic Oxidation of Hydroxymethylfurfural and Furfural by Using Heterogeneous Cox Oy -N@C Catalysts.

Efficient Cu/FeOx catalyst with developed structure for catalytic transfer hydrogenation of furfural

Efficient Synthesis of Furfuryl Alcohol from H2-Hydrogenation/Transfer Hydrogenation of Furfural Using Sulfonate Group Modified Cu Catalyst

Study on Liquid Phase Chemo-Selective Catalytic Hydrogenation of Furfural to Furfuryl Alcohol

The Improvement of Furfural Decarbonylation Process

Kinetics and mechanistic insights into selective hydrogenation of furfural to furfuryl alcohol over Ni–Ga intermetallics

Selective Hydrogenolysis and Hydrogenation of Furfuryl Alcohol in the Aqueous Phase Using Ru-Mn-Based Catalysts

Ultrahigh Selective Hydrogenation of Furfural Enabled by Modularizing Hydrogen Dissociation and Substrate Activation

Nanoporous Copper Catalysts for the Fluidized Electrocatalytic Hydrogenation of Furfural to Furfuryl Alcohol

Selective hydrogenation of furfural and its derivative over bimetallic NiFe-based catalysts: Understanding the synergy between Ni sites and Ni–Fe alloy

Tandem Hydrogenation/Hydrogenolysis of Furfural to 2-Methylfuran over a Fe/Mg/O Catalyst: Structure–Activity Relationship