Abstract:The performance of air-source heat pump is strongly influenced by ambient temperature variation. Improving its stability and efficiency during wintertime is important for promoting its applications, while existing studies paid few attentions to flexible parameter regulation of heat pump using mixture. In this paper, a single-stage compound air-source heat pump using ternary mixture was theoretically simulated and experimentally tested, in which operating parameters including pressure and concentration could be regulated with the cooperation of multiple valves and reservoirs. Using CO2/R134a/R600, operating pressure and mixture concentration were successfully regulated at ambient temperature from -30 & DEG;C to 0 & DEG;C, achieving a coefficient of performance from 1.834 to 2.546 when producing hot water at 75 & DEG;C. Whether R134a inclusion was favorable to energy performance depended on its influence on the temperature matching in recuperative process, especially the heat transfer process in recuperator. The addition of R134a significantly alleviated the increase of operating pressure and thus enlarged the operation range of this heat pump. The flammability range of CO2/R134a/R600 was calculated, indicating the insignificant influence of R134a on flammability retardance in the studied range of this paper. The significance of this study is further revealed with the potential advances of heat transfer technique and new-generation refrigerant. The findings in this paper contribute to: 1) the modification of air-source heat pump for operation at low temperature; 2) the regulation method for mixed-refrigerant system; 3) the exploration of new mixed-refrigerant in thermodynamic cycle.

Performance Prediction of a Novel Variable Capacity Heat Pump Using a Composition Varying Device

Performance Analysis of a Novel Hybrid Vapor Injection Cycle with Subcooler and Flash Tank for Air-Source Heat Pumps

Experimental Study on New Variable Composition Heat Pump System

Performance Analysis of a New Ejector Enhanced Vapor Injection Heat Pump Cycle

Experimental study on CO2 air source heat pump water heater

Theoretical Study of a Thermoelectric-Assisted Vapor Compression Cycle for Air-Source Heat Pump Applications

A Theoretical Study of an Innovative Ejector Enhanced Vapor Compression Heat Pump Cycle for Water Heating Application

Performance Investigation on a Novel Air-Source Heat Pump Using CO2/HC for Recirculated Water Heater in Cold Regions

Experimental and Theoretical Assessments on the Systematic Performance of a Single-Stage Air-Source Heat Pump Using Ternary Mixture in Cold Regions

Steady-State Performance Prediction for a Variable Speed Direct Expansion Air Conditioning System Using a White-Box Based Modeling Approach

Experimental Performance Analysis of an Improved Multifunctional Heat Pump System

SIMULATION AND COMPARISON OF AIR-SOURCE HEAT PUMPS USING VARIABLE COMPOSITION AND CONSTANT COMPOSITION MIXTURES OR PURE REFRIGERANT

Seasonal Heating Performance Prediction of Air-to-water Heat Pumps Based on Short-Term Dynamic Monitoring

Performance prediction of HFC, HC, HFO and HCFO working fluids for high temperature water source heat pumps

Energy and parametric optimization analysis of a novel double serpentine runner air-cooled PV/T assisted variable capacity air source heat pump system

Performance Analysis of a Novel Air Source Hybrid Solar Assisted Heat Pump

Design and performance analysis of motor phase change heat storage heat pump system for new energy vehicles

Performance Analysis and Operation Strategy of a Dual-Evaporation Temperature Heat Pump System for Electric Vehicles in Winter

A Novel PV/T-air Dual Source Heat Pump Water Heater System: Dynamic Simulation and Performance Characterization

Performance Simulation on Economizer System Coupled with Scroll Compressor

Evaporation temperature prediction of a direct-expansion solar-assisted heat pump