Study on the influential factors of iron-carbon micro-electrolysis process in treating pharmaceutical sewage

Jian ZHOU,Meng-bin SHI,Zhi-guo WANG,Yong-sheng ZHANG,Guang-xu QIN,Bin HU

DOI: https://doi.org/10.3969/j.issn.1009-6094.2011.04.017

2011-01-01

Applied Mechanics and Materials

Abstract:The paper is aimed at presenting our study results on the influential factors of iron-carbon micro-electrolysis process in treating pharmaceutical sewage.As we know,raw medicines for anesthetics usually contain highly concentrated refractory organics and high toxicity, but their biodegradability is usually poor.Since such highstrength refractory organics can not be used as carbon source,it is usually difficult for such sewage to get effectively treated biologically, though several biochemical methods were used such as sulfur-zeolite fixed bed reactor,catalytic inorganic membrane reactor and nanoscale zero valent iron,all of which proved to be limited either because of being too expensive or because of too complicated in structure to operate or manage.In spite of this,iron-carbon micro-electrolysis proves to be the most effective one,which helps to improve the biodegradability of the sewage and remove the refractory organisms and toxicity.Seeing the advantages of iron-carbon micro-electrolysis, we hope to improve the iron-carbon micro-electrolysis system to work out an economic and practical technology for effectively treating such sewage.In proceeding with this study,we have done an investigative iron-carbon micro-electrolysis of a sequential batch reactor in the mode of parallel experiments and the granularity of fillings,influent pH,the iron-carbon ratio,the gas-water ratio and the organic content loading.The results of our study show that it proves to be possible for the iron-carbon micro-electrolysis process to improve its removing rate of the chrominance of pharmaceutical sewage under the conditions of pH 3 with the iron-carbon ratio being 0.5,the granularity of fillings lmm,the organic volume loading being 175.5 kgCOD/(m iron-carbon·d), and a gas-water ratio 10 and HRT 2 h.Under the influent COD and chrominance of 19 000 mg/L and 600,it is possible to make the effluent up to 8 490 mg/L and 20,respectively,with the removal rate of 55.29 % and 96.67 %.In addition,the biodegradability of the pharmaceutical sewage can be improved from 0.14 to 0.56.