Abstract:Perovskite solar cells have been attracting more and more attentions due to their extraordinary performances in the photovoltaic field. In view of the highest certified power conversion efficiency of 25.5% that is much lower than the corresponding Shockley-Queisser limit, understanding and quantifying the main loss factors affecting the power conversion efficiency of perovskite solar cells are urgently needed. At present, the three loss mechanisms generally recognized are optical loss, ohmic loss, and non-radiative recombination loss. Including the trap-assisted bulk recombination and surface recombination, the non-radiative recombination is proved to be the dominant recombination mechanism prohibiting the increase of efficiency. In this work, based on semiconductor physics, the expressions of bulk and surface recombination currents are analytically derived. Then taking the optical loss, series and shunt resistance losses, and bulk and surface recombination losses into considerations, an equivalent circuit model is proposed to describe the current density-voltage characteristics of practical perovskite solar cells. Furthermore, by comparing to the drift-diffusion model, the pre-defined physical parameters of the drift-diffusion model well agree with the fitting parameters retrieved by the equivalent circuit model, which verifies the reliability of the proposed model. For example, the carrier lifetimes in the drift-diffusion model are consistent with the recombination factors in the equivalent circuit model. Moreover, when the circuit model is applied to analyze experimental results, the fitting outcomes show favorable consistency to the physical investigations offered by the experiments. And the relative fitting errors of the above cases are all less than 2%. Through employing the model, the dominant recombination type is clearly identified and split current density-voltage curves characterizing different loss mechanisms are offered, which intuitively reveals the physical principles of efficiency loss. Additionally, through calculating the efficiency loss ratios under the open-circuit voltage condition, quantifying the above-mentioned loss mechanisms becomes simple and compelling. The prediction capability of the model is expected to be enhanced if a series of light intensity dependent current density-voltage curves are fitted simultaneously. Consequently, this model offers a guideline to approach the efficiency limit from a circuit-level perspective. And the model is a comprehensive simulation and analysis tool for understanding the device physics of perovskite solar cells.

EPA Analysis of Fluid Loss Characteristics for a Microstructure in Photovoltaic Power Cell Cooling System

Loss Mechanism Analyses of Perovskite Solar Cells with Equivalent Circuit Model

Performance modelling of photovoltaic modules under actual operating conditions considering loss mechanism and energy distribution

Thermal Performance Analysis for Low-Concentration Photovoltaic Thermal System

Analysis of the power loss and quantification of the energy distribution in PV module

Experimental Determination of Power Losses and Heat Generation in Solar Cells for Photovoltaic-Thermal Applications

Comprehensive voltage-loss analysis and reduction of radiative recombination voltage loss in quantum-structured solar cells

Performance Assessment and Improvement of Photovoltaic-Thermal System based on Energy, Exergy, Economic and Environment Analysis

Study on liquid metal cooling of photovoltaic cell

Numerical Study on 2-Stage Phase Change Heat Sink for Cooling of Photovoltaic Panel

Exergy Analysis of a High Concentration Photovoltaic and Thermal System for Comprehensive Use of Heat and Electricity

Unveiling Energy Conversion Mechanisms and Regulation Strategies in Perovskite Solar Cells

Performance Analysis on a Solar Concentrating Thermoelectric Generator Using the Micro-Channel Heat Pipe Array

Comparative study on cooling method for concentrating photovoltaic system

Comparative study on heat transfer characteristics of molten PCM in PV/PCM air-based system based on grey relation analyses

Quantifying Losses in Open-Circuit Voltage in Solution-Processable Solar Cells

Topology optimization and numerical analysis of cold plates for concentrating photovoltaic thermal management

Loss Mechanism Analyses of Perovskite Solar Cells with an Equivalent Circuit Model

PERFORMANCE ANALYSIS OF A-SI PHOTOVOLTAIC/THERMAL SYSTEM USING OPTIMIZED DIRECT ABSORPTION COLLECTOR

Dynamic Performance Analysis of Photovoltaic–thermal Solar Collector with Dual Channels for Different Fluids

Thermal Management of Ultra High Concentrator Photovoltaic Cells: Analysing the Impact of Sintered Porous Media Microchannel Heat Sinks