A portable and online programmable radar signal simulator
Zhang Lu,Zhang Xing-Gan,Bai Ye-Chao,Zhang Wei
2010-01-01
Abstract:Radar signal simulator is an essential tool for radar receiving system test,especially during the field test. Different type of radar,different debugging and testing content require different simulating signal. Recently,the magnetic environment is becoming more and more complex. During the field test,capability assessment and regular maintenance,the need for universal portable radar signal simulator is becoming more and more urgent. An online programmable and portable radar signal simulator is designed in this paper. This simulator can output typical clutter wave,target modulation signal and noise modulation signal; it also can be connected with personal computer (PC) through universal serial bus (USB) interface to program online and produce the test signals required,which enlarge the practical range of radar signal simulator. This system consists of four main modules,which are the field-programmable gate array(FPGA) controlling module,the USB communicating interface,flash storage module,and signal output interface. The FPGA controlling module is the core part of the whole system,the chip used in this module is the EP1C3T144C8 in the cyclone series made by Altera,the developing environment is Altera Quartus II 6.0,and it will communicate and control the function of the USB interface,Flash storage module and output module. The USB interface module is the connection between the on board system and the PC system. The Flash storage module consist of a flash and four rams,the flash is used to store simulating radar signal data in the status out of electricity,and the four Ram are used to transmit the data to output module in very fast speed. The output interface is designed to output radar data in parallel or serial form. The system can download the simulating radar signal data from PC through USB interface and store it in the Flash under the control of FPGA module. Then the system could read the data in the flash to the four rams and output the appointed signals set by the buttons under the control of FPGA module. With this design,this radar signal simulating system can download radar data transport to the field test location without the need for electricity,and choose different form of the data to carry on the test process. The principal of work and design proposal of the radar signal simulating system are introduced. The design of hardware interface between modules and the control module are emphasized. It can be widely used in radar signal receiving system testing for its portable and programmable features and diversity of generated signals.