Analysis and Comparison of Collision Algorithm in Packing (Nesting)

宋亚男,叶家玮,邓飞其,冯穗豫

DOI: https://doi.org/10.3969/j.issn.1000-3428.2004.19.004

2004-01-01

Abstract:In this paper, the comparison of the collision algorithm is discussed. A new collision algorithm based on bitmap is brought out. By comparison, the new algorithm shows simplicity in coding and calculations. The samples of packing show the efficiency of the algorithm.

What problem does this paper attempt to address?

Analysis and Comparison of Three Collision Algorithms Based on Bitmap in Packing

宋亚男,叶家玮,邓飞其,冯穗豫,刘永清

DOI: https://doi.org/10.3969/j.issn.1674-3644.2004.01.017

2004-01-01

Abstract:In this paper, a comparison of three collision algorithms based on bitmap is presented with the runtime complexities of the algorithms discussed. The results of application show that the algorithm of collision by judgment of distance is the best one.
The Coding, Graphics-Matching and Packing (nesting) of Arbitrary Graphics Based on Bitmap

YA Song,JW Ye,FQ Deng,SY Feng

DOI: https://doi.org/10.1109/icmlc.2003.1260073

2003-01-01

Abstract:In this paper the coding, graphics-matching and packing (nesting) of arbitrary graphics based on bitmap are discussed. It is convenient to compute the area and the enveloping graphics of arbitrary graphics and detect the collision of two arbitrary graphics by the change of the colors. The results of experiments show that the method is effective.
A Novel Collision Detection Algorithm Based on Grids Enveloping for Industrial Robot Simulations

ZHAO Liang,ZHANG Yide,HU Xuxiao

DOI: https://doi.org/10.3969/j.issn.1004-132X.2017.03.011

2017-01-01

Abstract:To speed up the collision detection efficiency of industrial robots in the complex working environments,a novel collision detection algorithm was proposed using equal-sized cubic grids to cover the model and building tree structure of AABB in the grid.The space coordinates of these grids were stored orderly in the modeling progresses so as to determine whether there were grids intersecting in the traversal periods.Then traverse the hierarchical structure in the intersecting grids to detect collision precisely.Due to the grids had far less model data than the whole model,the detection speeds in the grids were far more fast than the traditional hierarchical bounding volume method where the building model was based on the whole model.The experimental results show that the detection efficiency in the novel algorithm is several times to dozes times (which depends on the size of grids) more than that in the traditional SOLID method for the large complex model environments.
A generalized collision algorithm for geometric graphics

Pengfei Zheng,Jingjing Lou,Chengjie Lian,Dajun Lin,Qi An

DOI: https://doi.org/10.1007/s00500-022-06883-6

IF: 3.732

2022-03-03

Soft Computing

Abstract:The two-dimensional graphical nesting problem is widespread in industrial production and is an NP-complete problem. The core technology of various nesting methods is the graphical collision algorithm. In this paper, a general algorithm for geometric graphics is proposed. According to the geometrical characteristics of the packed parts, the idea of divide and conquer is adopted, and the corresponding collision strategies are designed, respectively. Two-point bidirectional collision calculation, aligned bidirectional collision and slipping calculation are proposed to determine the collision relationship between graphics. The interpolation strategy is used to reduce the computation of NFP (No-Fit-Polygon). The precise interpolation between graphics is achieved by first marking and positioning, and then sliding interpolation in both directions, which improves the interpolation efficiency. Finally, the results of the comparison test by several cases of different types show that the algorithm is effective, stable, reliable and adaptable.

computer science, artificial intelligence, interdisciplinary applications
A Parallel Algorithm of Polygons Packing Based on Ant Colony.

W Peng,RF Tong,M Tang,JX Dong

DOI: https://doi.org/10.1109/cscwd.2005.194296

2005-01-01

Abstract:This paper presents a novel algorithm for optimal packing problem by combining ant colony algorithm with BLF (bottom-left-fill) heuristic approach. The proposed algorithm not only automatically looks for the best sequence of the polygons and each polygon's optimum rotation by ant colony algorithm but also implements the exact layout with the BLF heuristic algorithm. Moreover, the algorithm supports the parallel computation and facilitates quick convergence to the optimal solution. The experimental results show the effectiveness of our algorithm comparing with the other methods.
An Adaptive Anti-collision Algorithm Based on Binary-Tree Disassembly

Zhi-guo Ding,Li Guo,Xue-yong Zhu,Zhao-hua Wang

2009-01-01

Abstract:A new adaptive anti-collision algorithm based on binary-tree disassembly is proposed in this paper. In order to enhance the search efficiency, a big and complex binary-tree is disassembled to several small and simple binary-trees by estimating the distributing of tags. The introduction of the collision stack, as well as adjusting the search paths adaptively based on the state of slots, the performance of the new algorithm is improved further, including reducing the search timeslots and improving the throughput of timeslots. Theory and computer simulations show that the new anti-collision algorithm is practical, especially when the number of tags is large.
Two Dimensional Irregular Parts Packing Based on the Improved Genetic Algorithm

LI Ming,ZHANG Guang-xin,ZHOU Ze-kui

DOI: https://doi.org/10.3321/j.issn:1000-2472.2006.02.012

2006-01-01

Abstract:Aiming at the problem of two dimensional irregular parts packing, a new optimal packing algorithm was proposed.In order to enhance the operation speed of the algorithm,the algorithm to calculate the least surrounding boxes was improved.In order to enhance the global convergence performance of the algorithm,the selection operator was improved by using elitist preservation strategy.In order to enhance the precision of the algorithm,the decoding algorithm was improved by using the Height Adjustment algorithm.Solutions of the numerical example showed the effectiveness of the algorithm.
Irregular Polygons Nesting Algorithm Driven by Design Knowledge and Application

FENG Yixiong,ZHONG Ruirui,ZHANG Zhifeng,HUANG Cheng,LI Zhongkai,HU Bingtao,HONG Zhaoxi,TAN Jianrong

DOI: https://doi.org/10.13196/j.cims.2023.02.020

2023-01-01

Abstract:To efficiently solve the problem of two-dimensional irregular polygon packing in actual production, a heuristic algorithm driven by design knowledge was proposed. No Fit Polygon（NFP） was used to judge the relative positions between irregular polygons, and a mathematical model of local fitness was established to measure the fitting degree of irregular polygons. Then, a mathematical model driven by design knowledge was established to evaluate the position of irregular polygons to be placed. A greedy algorithm based on local search strategy was used to complete the packing. The experimental testing of international common benchmark cases and comparison with existing intelligent optimization algorithms proved that the proposed algorithm had certain advantages in layout quality and time performance with high stability. Besides, the experimental test of the sample data in actual production proved that the proposed algorithm had the value of being applied to actual production applications.
A Novel Greedy Computing Algorithm For Rectangle Packing Problems

yanbing liu,duanbing chen,p r china

2006-01-01

Abstract:Rectangle packing problem often appears in encasement and cutting as well as layout of homepage or newspaper, etc. This problem has been shown to be NP hard. For solving this problem, many compute algorithms based on different strategies are presented in the literatures. A novel-computing algorithm is proposed in this paper. The novel match algorithm tested the instances that taken from the literatures. The computational results demonstrate that the novel algorithm is rather optimal and efficient for solving rectangle block packing problem.
A Container Bin Packing Algorithm for Multiple Objects

Fei Luo,Chunhua Gu,Xu Fang,Yi Tang

DOI: https://doi.org/10.1007/978-3-319-22186-1_12

2015-01-01

Abstract:The bin packing problem considered in this paper has the character with items arriving in batches, such as the task dispatching process in the cloud. The problem has two packing objects, one of which is to minimize the number of used bins, and the other is to reduce the packing time. To meet the objects, a container packing algorithm is presented, which consists of rounds of packing. In one round the number of the necessary bins is first calculated, and those bins are opened in batch to pack items in parallel. This round will be iterated until there are no unpacked items. The proposed algorithm is compared with other classical bin packing algorithms through experiments, which have the same property of simplicity for implementation. It is shown that the novel algorithm not only saves the packing time, but also achieves better combined performance than others.
Covering, corner-searching and occupying: A three-stage intelligent algorithm for the 2d multishape part packing problem.

He Ren,Rui Zhong

DOI: https://doi.org/10.1371/journal.pone.0268514

IF: 3.7

2022-06-01

PLoS ONE

Abstract:The bin packing problem has a wide range of applications in industry. With the upgrade of the task difficulty, the traditional 2d rectangular layout algorithm can no longer meet the needs of modern industry, such as express packing task and exoplanet ore collection task. The express or ore samples come in heterogeneous shapes so they cannot all be treated as rectangular pieces. In this paper, we propose a three-stage method called covering, corner-searching and occupying (C,S&O) to solve the two-dimensional multishape part packing problem. The objective of the packing problem variant is to ensure maximum use of the raw material and minimize the trim loss. The algorithm cannot make use of information about the sequence of future objects that are going to arrive, only knowing the shape and size of the coming one, and the coming part must be packed into the bin immediately after its arrival without buffering or readjusting. The method of C,S&O hybridizes the idea of "gold corners, silver edges and grass belly" in the Chinese game Go and the method of finding picture corners in machine vision. In the first stage, the rectangular bin and the coming part are transformed into matrix representation, and generating the position matrix that indicates possible ways of packing the part into the bin. In the second stage, the suitable layout position of the coming part is obtained using machine vision image processing technology for reference. The third stage is calculating the environment matching degree to determine the current optimal placement orientation. In order to facilitate the display of the simulation results, only three shapes of parts are considered in the simulation, rectangle, circle and triangle. The experimental results show the effectiveness of this method. Consulting the literature, it is found that this paper is the first to propose a layout method for multishape manufacturing parts.

multidisciplinary sciences
A New Heuristic Algorithm for Rectangle Packing.

Wenqi Huang,Duanbing Chen,Ruchu Xu

DOI: https://doi.org/10.1016/j.cor.2005.12.005

IF: 5.159

2006-01-01

Computers & Operations Research

Abstract:The rectangle packing problem often appears in encasement and cutting as well as very large-scale integration design. To solve this problem, many algorithms such as genetic algorithm, simulated annealing and other heuristic algorithms have been proposed. In this paper, a new heuristic algorithm is recommended based on two important concepts, namely, the corner-occupying action and caving degree. Twenty-one rectangle-packing instances are tested by the algorithm developed, 16 of which having achieved optimum solutions within reasonable runtime. Experimental results demonstrate that the algorithm developed is fairly efficient for solving the rectangle packing problem.
An Improved Convolution Algorithm for Calculating Minkowski Operations in Laser Nesting Problem

Qirui Hu,Zheping Zhou,Zhiwei Lin,Jianzhong Fu,Congcong Luan

DOI: https://doi.org/10.2139/ssrn.4355294

2023-01-01

Abstract:Nesting in laser cutting application is required to place as many parts as possible on a given metal sheet. One key of the nesting algorithm is to detect the overlaps between parts. The No-Fit Polygon, also known as the Minkowski difference method, is considered to be the accurate solution of the overlap detection problem. However, calculating the Minkowski difference of the two arbitrary polygons is never an easy task. So far, several approaches have been proposed, but only two are practical: the brutal-force method and the convolution algorithm. The latter is considered to be more promising with the concept of reduced convolution algorithm, in which, however, the accurate boundary extraction with degenerate edges or points still remains a problem. In this paper, a new accurate boundary extraction algorithm is proposed for laser cutting nesting. The convolution line segments of Minkowski difference is calculated with the reduced convolution method. Then boundary quadrangles and triangles are constructed based on the convolution line segments. Together with input polygons, the quadrangles and the triangles are joined with the Boolean union operation. In this way, the error-prone boundary extraction problem is well solved. Furthermore, through polygon offset and Boolean operation, proposed algorithm can also find the degenerate edges and points. The efficiency and robustness of proposed algorithm is verified by several comparative examples. Also, the feasibility is verified by actual laser nesting experiments with exist method.
Optimized Space Decomposition Algorithm for Parallel Continuous Collision Detection

Peng Du,Min Tang,Ruofeng Tong

2013-01-01

Abstract:Continuous collision detection for deformable meshes in complex scenes is still hard to perform in real time. Therefore, we propose a novel parallel collision detection algorithm to improve the overall performance of continuous collision detection. In our method, we present a space decomposition method to parallel bounding volume hierarchy updating, and then we present a dynamic task assignment method to balance the load of collision detection evenly among different cores. Finally, we combined our method with a front based parallel collision detection algorithm and tested its performance on several benchmarks including surface and volume meshes. Compared with previous algorithms, our algorithm can improve the efficiency of collision detection.
A Practical Heuristic Algorithm for Rectangle Parts Packing Problem

罗意平,刘军,李兵,蒋庄德

DOI: https://doi.org/10.3969/j.issn.1003-0158.2003.04.009

2003-01-01

Abstract:Based on the study of the traditional approximation algorithm for the rectangle packing problem and its main shortcoming, an improved heuristic algorithm in which different strategy is taken according to the practical layout condition of the last stock is proposed, so the defect of the former algorithm when the parts number is not large enough to fill the last stockplate is limited, and with this new algorithm a computer aided packing system for rectangle parts is developed on Visual C++ 6.0. It is proved that a more satisfying optimized packing result can be achieved. The exact steps to realize the algorithm and system are descried in detail.
An Intelligent Enumerative Algorithm for Solving Rectangle Packing Problem

陈端兵,刘景发,尚明生,傅彦

2008-01-01

Abstract:Rectangle packing is often applied in industry,such as shipping,timber cutting,very large scale integration(VLSI) floor planning,newspaper layout,and so on.Many algorithms,such as genetic algorithm,simulated annealing and other heuristic algorithms are presented to solve it.Based on existing research,an intelligent enumerative algorithm is proposed,and the key of the algorithm is to design a fast and efficient enumerative strategy.Twenty one instances provided by Hopper and Turton were used to test the performance of the proposed algorithm.The percent of unpacked area and runtime are 0.04% and 277.69 s respectively;furthermore,18 instances of them have achieved optimal solutions.The experimental results demonstrate that the presented algorithm is efficient for solving the rectangle packing problem.
An Adaptive Anti-Collision Algorithm Based on Search Matrix

Zhi-Guo DING,Li GUO,Qi LIU

DOI: https://doi.org/10.3969/j.issn.1003-6059.2008.04.008

2008-01-01

Abstract:An adaptive anti-collision algorithm is proposed in the paper. To overcome the disadvantage of ABS algorithm, the information of collision bits is used and an EPC search matrix is determined in the proposed algorithm. The concept of collision stack is put forward. Based on the states of timeslots, the search paths can be adaptively adjusted. Theory and computer simulation results show that the proposed anti-collision algorithm is practical and can greatly decrease collision timeslots, idle timeslots and communication load.
Research on Packing Problem Based on Simulated Annealing Algorithm

ZHANG He-jun,ZHANG Yue

DOI: https://doi.org/10.3969/j.issn.1000-7024.2006.11.023

2006-01-01

Abstract:A new simulated annealing algorithm to solve packing problems is introduced.Temper strategy is adopted based on traditional simulated annealing algorithm so as to improve result optimization.Considering the characteristics of packing problem,Sequence pair is used to describe the structure of the answer to packing problems.Validated by calculation,this algorithm is not only enhanced result optimization comparing with traditional algorithm,but also improves packing problems.
Unified image-space collision detection algorithm for arbitrary geometric models

Long Zhang,Wei Chen,Yi Gong,HuaGen Wan,Qunsheng Peng

2006-01-01

Journal of Computational Information Systems

Abstract:This paper describes a unified collision detection algorithm for models with arbitrary geometric forms. The algorithm is based on a uniform geometric representation scheme named flattened and packed G-volume (FPGV). FPGVs hold 3D discrete geometric information compactly in 2D. It can be stored as textures in video memory locally. Efficient algorithms are provided to convert various geometric representations into FPGV. Then collision queries for several models are accomplished by means of a simple comparison of their corresponding FPGV textures. The whole process is fully performed in graphics hardware. Experimental results show that interactive frame rates can be achieved among complex and deformable models.
Simulated Testing and Comparison of Algorithms for Packet Classification

王永纲,石江涛,戴雪龙,颜天信

DOI: https://doi.org/10.3969/j.issn.0253-2778.2004.04.004

2004-01-01

JUSTC

Abstract:After investigating the variety of algorithms based on tries structure and computational geometry, the software testing platform for their performance evaluation was implemented. The platform consists of network traffic simulation, algorithms and output parameters statistics. With the main performance curves, including time complexity curves and space complexity curves presented in the paper, the behaviors of algorithms can be recognized deeply. This is necessary as a good starting point to do further research on the new algorithms for packet classification and it is also possible to satisfy the most current application requirements by the combination of the present algorithms.

Analysis and Comparison of Collision Algorithm in Packing (Nesting)

Analysis and Comparison of Three Collision Algorithms Based on Bitmap in Packing

The Coding, Graphics-Matching and Packing (nesting) of Arbitrary Graphics Based on Bitmap

A Novel Collision Detection Algorithm Based on Grids Enveloping for Industrial Robot Simulations

A generalized collision algorithm for geometric graphics

A Parallel Algorithm of Polygons Packing Based on Ant Colony.

An Adaptive Anti-collision Algorithm Based on Binary-Tree Disassembly

Two Dimensional Irregular Parts Packing Based on the Improved Genetic Algorithm

Irregular Polygons Nesting Algorithm Driven by Design Knowledge and Application

A Novel Greedy Computing Algorithm For Rectangle Packing Problems

A Container Bin Packing Algorithm for Multiple Objects

Covering, corner-searching and occupying: A three-stage intelligent algorithm for the 2d multishape part packing problem.

A New Heuristic Algorithm for Rectangle Packing.

An Improved Convolution Algorithm for Calculating Minkowski Operations in Laser Nesting Problem

Optimized Space Decomposition Algorithm for Parallel Continuous Collision Detection

A Practical Heuristic Algorithm for Rectangle Parts Packing Problem

An Intelligent Enumerative Algorithm for Solving Rectangle Packing Problem

An Adaptive Anti-Collision Algorithm Based on Search Matrix

Research on Packing Problem Based on Simulated Annealing Algorithm

Unified image-space collision detection algorithm for arbitrary geometric models

Simulated Testing and Comparison of Algorithms for Packet Classification